Xp-Me networking problem

Okay guyz i need help.
i have one computer running ME OS and another running XP
os. i networked the two computers together using a hub. XP
is connected to the internet and printer.

My problem
I can't access XP os from me os. Tells me it's
unavailable. on the hand, XP os can't even show the
workgroup. i don't know what to do.

any help will be much appreciated.

On Wed, 5 May 2004 12:59:09 -0700, "*email_address_deleted*"
<anonymous@discussions.microsoft.com> wrote:

>Okay guyz i need help.
>i have one computer running ME OS and another running XP
>os. i networked the two computers together using a hub. XP
>is connected to the internet and printer.
>
>My problem
>I can't access XP os from me os. Tells me it's
>unavailable. on the hand, XP os can't even show the
>workgroup. i don't know what to do.
>
>any help will be much appreciated.

Please provide ipconfig information for each computer.
Start - Run - "cmd". Type "ipconfig /all >c:\ipconfig.txt" into the command
window - Open c:\ipconfig.txt in Notepad, copy and paste into your next post.

Are you running both Client for Microsoft Networks, and File and Printer Sharing
for Microsoft Networks (Local Area Connection - Properties), on both computers?
Do you have shares setup on both?

Are you running NetBIOS Over TCP/IP (Local Area Connection - Properties - TCP/IP
- Properties - Advanced - WINS) on both computers?

Make sure the browser service is running on each. Control Panel -
Administrative Tools - Services. Verify that the Computer Browser service is
started.

If the XP computer is XP Pro, check to see if Simple File Sharing (Control Panel
- Folder Options - View - Advanced settings) is enabled or disabled. With XP
Pro and ME mixed, you should probably enable SFS.

If SFS is disabled, check the Local Security Policy (Control Panel -
Administrative Tools). Under Local Policies - Security Options, look at
"Network access: Sharing and security model", and ensure it's set to "Classic -
local users authenticate as themselves".

If you set the Local Security Policy to "Guest only", make sure that the Guest
account is enabled, and has an identical, non-blank, password on all computers.
If "Classic", setup and use a common account with identical, non-blank, password
on all computers.

Do any of the computers have a software firewall (ICF or third party)? If so,
you need to configure them for file sharing, by opening ports TCP 139, 445 and
UDP 137, 138, 445, and / or by identifying the other computers as present in the
Local (Trusted) zone. Firewall configurations are a very common cause of
(network) browser, and file sharing, problems.

From each computer, verify connectivity:
1) Ping the other by name.
2) Ping the other by ip address.
3) Ping itself by name.
4) Ping itself by ip address.
5) Ping 127.0.0.1.
Report success / failure of each of 10 pings.

And please don't contribute to the spread of email address mining viruses.
Learn to munge your email address properly, to keep yourself a bit safer when
posting to open forums. Protect yourself and the rest of the internet - never
post your address unmunged.
http://www.mailmsg.com/SPAM_munging.htm

Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.