Windows XP Networking 1 wired computer and one wireless computer

Can you set up a home network if one computer is wired and has no wirelss
card in it and the other computer is wireless and has the wireless card and
router connected to it or do i have to install a wireless card in the wired
computer

OttoSyracuse wrote:
> Can you set up a home network if one computer is wired and has no wirelss
> card in it and the other computer is wireless and has the wireless card and
> router connected to it or do i have to install a wireless card in the wired
> computer

Certainly you can set up a home network in that situation. The fact that
one computer connects wirelessly and the other one doesn't is
irrelevant. They are both part of the same Local Area Network (LAN).
Since you didn't mention what operating systems the two machines are
running, see the general networking information below:

Excellent, thorough, yet easy to understand article about File/Printer
Sharing in Vista. Includes details about sharing printers as well as
files and folders:
http://technet.microsoft.com/en-us/l...27037.aspxThis link will
take you through Vista networking very well:

For XP, start by running the Network Setup Wizard on all machines (see
caveat in Item A below).

A. Configure firewalls on all machines to allow the Local Area Network
(LAN) traffic as trusted. With Windows Firewall, this means allowing
File/Printer Sharing on the Exceptions tab. Normally running the Network
Setup Wizard on XP will take care of this for those machines.The only
"gotcha" is that this will turn on the XPSP2 Windows Firewall. If you
aren't running a third-party firewall or have an antivirus with
"Internet Worm Protection" (like Norton 2006/07) which acts as a
firewall, then you're fine. With third-party firewalls, I usually
configure the LAN allowance with an IP range. Ex. would be
192.168.1.0-192.168.1.254. Obviously you would substitute your correct
subnet. Do not run more than one firewall.

B. With earlier Microsoft operating systems, the name of the Workgroup
didn't matter. Apparently it does with Vista, so put all computers in
the same Workgroup. This is done from the System applet in Control
Panel, Computer Name tab.

C. Create identical user accounts and passwords on all machines. If you
wish a machine to boot directly to the Desktop (into one particular
user's account) for convenience, you can do this. The instructions at
this link work for both XP and Vista:

Configure Windows to Automatically Login (MVP Ramesh) -
http://windowsxp.mvps.org/Autologon.htm

D. If one or more of the computers is XP Pro or Media Center:

1. If you need Pro's ability to set fine-grained permissions, turn off
Simple File Sharing (Folder Options>View tab) and create identical user
accounts/passwords on all computers.

2. If you don't care about using Pro's advanced features, leave the
Simple File Sharing enabled.

Simple File Sharing means that Guest (network) is enabled. This means
that anyone without a user account on the target system can use its
resources. This is a security hole but only you can decide if it matters
in your situation.

I think it is a good idea to create the identical user
accounts/passwords in any case when Vista machines are involved and it
isn't an onerous task with home/small networks.

E. Create shares as desired. XP Home does not permit sharing of users'
home directories (My Documents) or Program Files, but you can share
folders inside those directories. A better choice is to simply use the
Shared Documents folder. See the first link above for details about
Vista sharing.


Malke
--
Elephant Boy Computers
www.elephantboycomputers.com
"Don't Panic!"
MS-MVP Windows - Shell/User

On Oct 24, 10:41 am, OttoSyracuse
<OttoSyrac...@discussions.microsoft.com> wrote:
> Can you set up a home network if one computer is wired and has no wirelss
> card in it and the other computer is wireless and has the wireless card and
> router connected to it or do i have to install a wireless card in the wired
> computer

This a "preferred" way of setting up a home "wireless" network. The
wired PC is to be used to setup, monitor and update the router. Most
wireless router now offer upto 4 "wire" ports.

Thanks Malke Sorry about forgetting to say we use windows xp.

"Malke" wrote:

> OttoSyracuse wrote:
> > Can you set up a home network if one computer is wired and has no wirelss
> > card in it and the other computer is wireless and has the wireless card and
> > router connected to it or do i have to install a wireless card in the wired
> > computer
>
> Certainly you can set up a home network in that situation. The fact that
> one computer connects wirelessly and the other one doesn't is
> irrelevant. They are both part of the same Local Area Network (LAN).
> Since you didn't mention what operating systems the two machines are
> running, see the general networking information below:
>
> Excellent, thorough, yet easy to understand article about File/Printer
> Sharing in Vista. Includes details about sharing printers as well as
> files and folders:
> http://technet.microsoft.com/en-us/l...27037.aspxThis link will
> take you through Vista networking very well:
>
> For XP, start by running the Network Setup Wizard on all machines (see
> caveat in Item A below).
>
> A. Configure firewalls on all machines to allow the Local Area Network
> (LAN) traffic as trusted. With Windows Firewall, this means allowing
> File/Printer Sharing on the Exceptions tab. Normally running the Network
> Setup Wizard on XP will take care of this for those machines.The only
> "gotcha" is that this will turn on the XPSP2 Windows Firewall. If you
> aren't running a third-party firewall or have an antivirus with
> "Internet Worm Protection" (like Norton 2006/07) which acts as a
> firewall, then you're fine. With third-party firewalls, I usually
> configure the LAN allowance with an IP range. Ex. would be
> 192.168.1.0-192.168.1.254. Obviously you would substitute your correct
> subnet. Do not run more than one firewall.
>
> B. With earlier Microsoft operating systems, the name of the Workgroup
> didn't matter. Apparently it does with Vista, so put all computers in
> the same Workgroup. This is done from the System applet in Control
> Panel, Computer Name tab.
>
> C. Create identical user accounts and passwords on all machines. If you
> wish a machine to boot directly to the Desktop (into one particular
> user's account) for convenience, you can do this. The instructions at
> this link work for both XP and Vista:
>
> Configure Windows to Automatically Login (MVP Ramesh) -
> http://windowsxp.mvps.org/Autologon.htm
>
> D. If one or more of the computers is XP Pro or Media Center:
>
> 1. If you need Pro's ability to set fine-grained permissions, turn off
> Simple File Sharing (Folder Options>View tab) and create identical user
> accounts/passwords on all computers.
>
> 2. If you don't care about using Pro's advanced features, leave the
> Simple File Sharing enabled.
>
> Simple File Sharing means that Guest (network) is enabled. This means
> that anyone without a user account on the target system can use its
> resources. This is a security hole but only you can decide if it matters
> in your situation.
>
> I think it is a good idea to create the identical user
> accounts/passwords in any case when Vista machines are involved and it
> isn't an onerous task with home/small networks.
>
> E. Create shares as desired. XP Home does not permit sharing of users'
> home directories (My Documents) or Program Files, but you can share
> folders inside those directories. A better choice is to simply use the
> Shared Documents folder. See the first link above for details about
> Vista sharing.
>
>
> Malke
> --
> Elephant Boy Computers
> www.elephantboycomputers.com
> "Don't Panic!"
> MS-MVP Windows - Shell/User
>