HTFC Forums

H.T.F.C.

How To Fix Computers





Go Back   HTFC Forums > Software Newsgroups > Windows XP > XP Networking

Register FAQ Members List Calendar Search Today's Posts Mark Forums Read
  #1  
Old 04-28-2004, 10:06 PM
bob
 
Posts: n/a
Default win xp pro networked with win 98 with hub

I set up a network using xp pro & 98 with a hub the 98 does not see the xp. I put a xp laptop in place of the 98. The xp laptop does not see the xp computer98. All protocal are the same. The connection have been tested.
Any ideas?


Bob
Reply With Quote
Sponsored Links
  #2  
Old 04-28-2004, 11:22 PM
Chuck
 
Posts: n/a
Default Re: win xp pro networked with win 98 with hub

On Wed, 28 Apr 2004 14:06:04 -0700, bob <*email_address_deleted*> wrote:

>I set up a network using xp pro & 98 with a hub the 98 does not see the xp. I put a xp laptop in place of the 98. The xp laptop does not see the xp computer98. All protocal are the same. The connection have been tested.
>Any ideas?
>
>
>Bob


Bob,

The XP laptop: Home or Pro?

Are you running both Client for Microsoft Networks, and File and Printer Sharing
for Microsoft Networks (Local Area Connection - Properties), on both computers?
Do you have shares setup on both?

Are you running NetBIOS Over TCP/IP (Local Area Connection - Properties - TCP/IP
- Properties - Advanced - WINS) on both computers?

Make sure the browser service is running on both computers. Control Panel -
Administrative Tools - Services. Verify that the Computer Browser service is
started.

On the XP Pro computer, check to see if Simple File Sharing (Control Panel -
Folder Options - View - Advanced settings) is enabled or disabled.

If SFS is disabled, check the Local Security Policy (Control Panel -
Administrative Tools). Under Local Policies - Security Options, look at
"Network access: Sharing and security model", and ensure it's set to "Classic -
local users authenticate as themselves".

If you set the Local Security Policy to "Guest only", make sure that the Guest
account is enabled, and has an identical, non-blank, password on all computers.
If "Classic", setup and use a common account with identical, non-blank, password
on all computers.

Do any of the computers have a software firewall (ICF or third party)? If so,
you need to configure them for file sharing, by opening ports TCP 139, 445 and
UDP 137, 138, 445, and / or by identifying the other computers as present in the
Local (Trusted) zone. Firewall configurations are a very common cause of
(network) browser problems like what you're describing.

Please provide ipconfig information for each computer.
Start - Run - "cmd". Type "ipconfig /all >c:\ipconfig.txt" into the command
window - Open c:\ipconfig.txt in Notepad, copy and paste into your next post.

From each computer, verify connectivity:
1) Ping the other by name.
2) Ping the other by ip address.
3) Ping itself by name.
4) Ping itself by ip address.
5) Ping 127.0.0.1.
Report success / failure of each of 10 pings.

Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.
Reply With Quote
Sponsored Links
Reply


Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Movving a HP 4500 DN networked printer alt.child.support Printers 1 08-15-2007 08:27 PM
Movving a HP 4500 DN networked printer chaz HP 0 08-14-2007 10:18 PM
Getting a HP PSC 1410 networked joeri.bouchet@gmail.com Printers 2 06-21-2007 04:15 PM
Boot from external networked PC? heather Windows Vista Installation 1 05-23-2007 01:35 AM
networked apps zak XP Networking 1 04-19-2004 09:42 AM


All times are GMT. The time now is 12:52 PM.


Powered by vBulletin® Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.1.0
© 2004 - 2007 Web-S-Sense Pty. Ltd. Usenet and forums posts © their respective authors.
Ad Management by RedTyger