VPN setup on Microsoft router MN-700

Hi,

I am a student here in British Columbia and trying to set up a VPN
connection with the Microsoft Broadband networking router MN-700. The
university gave me a sheet how to set up the router. I could enter the
information for the ports but I also need to enter the information for the
protocol forwarding for the IP protocols 47 and 50 (these are for GRE and
ESP) but I can't find where to enter this nor do I know how to do it with
this specific router.

Any help or idea out there.

this router is old and no longer supported. if the last firmware
released http://support.microsoft.com/kb/814445/ does not auto
forward those protocols, you will need to purchase a different
router.

On Thu, 2 Oct 2008 23:01:01 -0700, Joerg in Vancouver
<JoerginVancouver@discussions.microsoft.com> wrote:

>Hi,
>
>I am a student here in British Columbia and trying to set up a VPN
>connection with the Microsoft Broadband networking router MN-700. The
>university gave me a sheet how to set up the router. I could enter the
>information for the ports but I also need to enter the information for the
>protocol forwarding for the IP protocols 47 and 50 (these are for GRE and
>ESP) but I can't find where to enter this nor do I know how to do it with
>this specific router.
>
>Any help or idea out there.
--

Barb Bowman
MS-MVP
http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
http://digitalmediaphile.wordpress.com