Two ip addresses?

I have two XP machines connected via a wireless access
point w 4/ port switch. Both have one network card
installed on their machine. The network is working fine,
no problems at all. I just bought a second network card
for PC 1.

What I would like to do is install the second network
card in PC1 so that it will have two ip addresses. This
way PC2 could have two different ip addresses to connect
to computer 1. PC2 won't have a second network card
installed.

In other words, PC2 can access the other computer and
connect with either using the ip address 192.168.1.2 or
172.16.x.y.

Will this work?

In article <25cee01c4612d$f14c0450$a501280a@phx.gbl>, "Sam"
<anonymous@discussions.microsoft.com> wrote:
>I have two XP machines connected via a wireless access
>point w 4/ port switch. Both have one network card
>installed on their machine. The network is working fine,
>no problems at all. I just bought a second network card
>for PC 1.
>
>What I would like to do is install the second network
>card in PC1 so that it will have two ip addresses. This
>way PC2 could have two different ip addresses to connect
>to computer 1. PC2 won't have a second network card
>installed.
>
>In other words, PC2 can access the other computer and
>connect with either using the ip address 192.168.1.2 or
>172.16.x.y.
>
>Will this work?

If you assign two static IP addresses to PC2's network card
(192.168.1.x and 172.16.x.y), it will be able to access PC1 using
either of PC1's network cards.

Accessing PC2 using its computer name (\\PC1) or My Network Places
will use one network adapter or the other, but not both. Accessing
PC2 using one of its IP addresses (e.g. \\192.168.1.2) will use the
network adapter that has that IP address.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com

That seems much more of a headache to me. I was hoping to
use DHCP. If I install a second network card, I was
hoping that it could assign 169.x.x.x. I don't care about
Internet on the new second adapter.

Maybe I'll just disable the one network card in Device
Manager. This way I can install the other and switch back
and forth.

Any problems there?

....
>-----Original Message-----
>In article <25cee01c4612d$f14c0450
$a501280a@phx.gbl>, "Sam"
><anonymous@discussions.microsoft.com> wrote:
>>I have two XP machines connected via a wireless access
>>point w 4/ port switch. Both have one network card
>>installed on their machine. The network is working
fine,
>>no problems at all. I just bought a second network card
>>for PC 1.
>>
>>What I would like to do is install the second network
>>card in PC1 so that it will have two ip addresses. This
>>way PC2 could have two different ip addresses to
connect
>>to computer 1. PC2 won't have a second network card
>>installed.
>>
>>In other words, PC2 can access the other computer and
>>connect with either using the ip address 192.168.1.2 or
>>172.16.x.y.
>>
>>Will this work?
>
>If you assign two static IP addresses to PC2's network
card
>(192.168.1.x and 172.16.x.y), it will be able to access
PC1 using
>either of PC1's network cards.
>
>Accessing PC2 using its computer name (\\PC1) or My
Network Places
>will use one network adapter or the other, but not
both. Accessing
>PC2 using one of its IP addresses (e.g. \\192.168.1.2)
will use the
>network adapter that has that IP address.
>--
>Best Wishes,
>Steve Winograd, MS-MVP (Windows Networking)
>
>Please post any reply as a follow-up message in the news
group
>for everyone to see. I'm sorry, but I don't answer
questions
>addressed directly to me in E-mail or news groups.
>
>Microsoft Most Valuable Professional Program
>http://mvp.support.microsoft.com
>.
>