I fail to connect to a second pc in my small network. The error message was:
"The network path was not found"
How can i to fix it?
Thanks,
Enzo Fiorillo
> I fail to connect to a second pc in my small network. The error message
> was: "The network path was not found"
> How can i to fix it?
Since you've provided no information except that "it's broken", please read
through the following general network troubleshooting steps:
Here are general network troubleshooting steps. Not everything may be
applicable to your situation, so just take the bits that are. It may look
daunting, but if you follow the steps at the links and suggestions below
systematically and calmly, you will have no difficulty in setting up your
sharing.
For XP, start by running the Network Setup Wizard on all machines (see
caveat in Item A below).
Problems sharing files between computers on a network are generally caused
by 1) a misconfigured firewall or overlooked firewall (including a stateful
firewall in a VPN); or 2) inadvertently running two firewalls such as the
built-in Windows Firewall and a third-party firewall; and/or 3) not having
identical user accounts and passwords on all Workgroup machines; 4) trying
to create shares where the operating system does not permit it.
A. Configure firewalls on all machines to allow the Local Area Network (LAN)
traffic as trusted. With Windows Firewall, this means allowing File/Printer
Sharing on the Exceptions tab. Normally running the Network Setup Wizard on
XP will take care of this for those machines.The only "gotcha" is that this
will turn on the XPSP2 Windows Firewall. If you aren't running a
third-party firewall or have an antivirus with "Internet Worm
Protection" (like Norton 2006/07) which acts as a firewall, then you're
fine. With third-party firewalls, I usually configure the LAN allowance
with an IP range. Ex. would be 192.168.1.0-192.168.1.254. Obviously you
would substitute your correct subnet. Do not run more than one firewall. DO
NOT TURN OFF FIREWALLS; CONFIGURE THEM CORRECTLY.
B. For ease of organization, put all computers in the same Workgroup. This
is done from the System applet in Control Panel, Computer Name tab.
C. Create matching user accounts and passwords on all machines. You do not
need to be logged into the same account on all machines and the passwords
assigned to each user account can be different; the accounts/passwords just
need to exist and match on all machines. DO NOT NEGLECT TO CREATE
PASSWORDS, EVEN IF ONLY SIMPLE ONES. If you wish a machine to boot directly
to the Desktop (into one particular user's account) for convenience, you
can do this. The instructions at this link work for both XP and Vista:
D. If one or more of the computers is XP Pro or Media Center, turn off
Simple File Sharing (Folder Options>View tab).
E. Create shares as desired. XP Home does not permit sharing of users' home
directories or Program Files, but you can share folders inside those
directories. A better choice is to simply use the Shared Documents folder.
See the first link above for details about Vista sharing.
> Enzo Fiorillo wrote:
>
> > I fail to connect to a second pc in my small network. The error message
> > was: "The network path was not found"
> > How can i to fix it?
>
> Since you've provided no information except that "it's broken", please read
> through the following general network troubleshooting steps:
>
> Here are general network troubleshooting steps. Not everything may be
> applicable to your situation, so just take the bits that are. It may look
> daunting, but if you follow the steps at the links and suggestions below
> systematically and calmly, you will have no difficulty in setting up your
> sharing.
>
> For XP, start by running the Network Setup Wizard on all machines (see
> caveat in Item A below).
>
> Problems sharing files between computers on a network are generally caused
> by 1) a misconfigured firewall or overlooked firewall (including a stateful
> firewall in a VPN); or 2) inadvertently running two firewalls such as the
> built-in Windows Firewall and a third-party firewall; and/or 3) not having
> identical user accounts and passwords on all Workgroup machines; 4) trying
> to create shares where the operating system does not permit it.
>
> A. Configure firewalls on all machines to allow the Local Area Network (LAN)
> traffic as trusted. With Windows Firewall, this means allowing File/Printer
> Sharing on the Exceptions tab. Normally running the Network Setup Wizard on
> XP will take care of this for those machines.The only "gotcha" is that this
> will turn on the XPSP2 Windows Firewall. If you aren't running a
> third-party firewall or have an antivirus with "Internet Worm
> Protection" (like Norton 2006/07) which acts as a firewall, then you're
> fine. With third-party firewalls, I usually configure the LAN allowance
> with an IP range. Ex. would be 192.168.1.0-192.168.1.254. Obviously you
> would substitute your correct subnet. Do not run more than one firewall. DO
> NOT TURN OFF FIREWALLS; CONFIGURE THEM CORRECTLY.
>
> B. For ease of organization, put all computers in the same Workgroup. This
> is done from the System applet in Control Panel, Computer Name tab.
>
> C. Create matching user accounts and passwords on all machines. You do not
> need to be logged into the same account on all machines and the passwords
> assigned to each user account can be different; the accounts/passwords just
> need to exist and match on all machines. DO NOT NEGLECT TO CREATE
> PASSWORDS, EVEN IF ONLY SIMPLE ONES. If you wish a machine to boot directly
> to the Desktop (into one particular user's account) for convenience, you
> can do this. The instructions at this link work for both XP and Vista:
>
> Configure Windows to Automatically Login (MVP Ramesh) -
> http://windowsxp.mvps.org/Autologon.htm
>
> D. If one or more of the computers is XP Pro or Media Center, turn off
> Simple File Sharing (Folder Options>View tab).
>
> E. Create shares as desired. XP Home does not permit sharing of users' home
> directories or Program Files, but you can share folders inside those
> directories. A better choice is to simply use the Shared Documents folder.
> See the first link above for details about Vista sharing.
>
> Malke
> --
> MS-MVP
> Elephant Boy Computers - Don't Panic!
> FAQ - http://www.elephantboycomputers.com/#FAQ
>
>
The network path was not found 
Linear Mode
