how to link 2pc with 4 port router t0 Internet

how to link 2pc with 4 port router t0 Internet(adsl type)

Get a broadband firewall router if you don't have one - preferably one with
a built-in firewall (most don't have this).
Plug all the computers into the hub/switch.
Plug your DSL connection into the Internet port on the router.
If the router does DHCP by default, which most do, you should be able to get
an IP address on each PC.
Find the default gateway address (run ipconfig in a command line) and open a
web browser to that IP address.
The rest depends on your router....a lot of them have wizards, but the
interface should be simple.

andy wrote:
> how to link 2pc with 4 port router t0 Internet(adsl type)

On Wed, 19 May 2004 05:16:08 -0700, "andy" <anonymous@discussions.microsoft.com>
wrote:

>how to link 2pc with 4 port router t0 Internet(adsl type)

http://www.cablesense.com/
http://www.homenethelp.com/

Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.