Scanner does not appear in scanners and cameras

I have a Visioneer Roadwarrior scanner that I installed. It supposedly
supports TWAIN and WIA. I was able to successfully install it. However
it does not appear in the scanners and cameras in control panel. I
have made sure that the windows image acquisition (WIA) service is
started and set to Automatic. I have also tried using wiaacmgr.exe
but it reports the following:

The computer cannot detect the scanner or camera.

I have tried to completely uninstall the scanner, reboot, then
reinstall it. The same thing happens.
How can I fix the WIA for scanners/cameras?

Thanks
Mike

And what mystery version of the scanner would it be?
http://support.visioneer.com/default...ategory=mobile


"eljainc" <eljainc@sbcglobal.net> wrote in message
news:951c8a2a-dfcd-4f36-b4a9-fcce8b46450f@k17g2000yqb.googlegroups.com...
>I have a Visioneer Roadwarrior scanner that I installed. It supposedly
> supports TWAIN and WIA. I was able to successfully install it. However
> it does not appear in the scanners and cameras in control panel. I
> have made sure that the windows image acquisition (WIA) service is
> started and set to Automatic. I have also tried using wiaacmgr.exe
> but it reports the following:
>
> The computer cannot detect the scanner or camera.
>
> I have tried to completely uninstall the scanner, reboot, then
> reinstall it. The same thing happens.
> How can I fix the WIA for scanners/cameras?
>
> Thanks
> Mike

There is no mystery version. It is the Visioneer Roadwarrior scanner.
I have tried the drivers that are listed for the Roadwarrior, which
apparently are the same as those shipped with the unit.


Nov 7, 3:13*am, "DL" <notva...@spoofaddress.co.uk> wrote:
> And what mystery version of the scanner would it be?http://support.visioneer.com/default...ategory=mobile
>
> "eljainc" <elja...@sbcglobal.net> wrote in message
>
> news:951c8a2a-dfcd-4f36-b4a9-fcce8b46450f@k17g2000yqb.googlegroups.com...
>
> >I have a Visioneer Roadwarrior scanner that I installed. It supposedly
> > supports TWAIN and WIA. I was able to successfully install it. However
> > it does not appear in the scanners and cameras in control panel. I
> > have made sure that the windows image acquisition (WIA) service is
> > started and set to Automatic. *I have also tried using wiaacmgr.exe
> > but it reports the following:
>
> > The computer cannot detect the scanner or camera.
>
> > I have tried to completely uninstall the scanner, reboot, then
> > reinstall it. The same thing happens.
> > How can I fix the WIA for scanners/cameras?
>
> > Thanks
> > Mike