Force XP to install over older version?

For reasons too strange to bother explaining, I need to use my ancient XP CD
to install onto a laptop with a newer version. When I pop in the CD and
start the installation, I get a message saying it can't install over a newer
version. It also says "If you continue the world will end blah blah
blah...), but the continue button is greyed out. The only options available
are Cancel and More Details.

How can I force this installation to do what I want?

JoeSpareBedroom wrote:
> For reasons too strange to bother explaining, I need to use my ancient XP CD
> to install onto a laptop with a newer version. When I pop in the CD and
> start the installation, I get a message saying it can't install over a newer
> version. It also says "If you continue the world will end blah blah
> blah...), but the continue button is greyed out. The only options available
> are Cancel and More Details.
>
> How can I force this installation to do what I want?
>
>


You have two options:

1) Use your existing installation CD to perform a clean installation,
formatting the hard drive as the first step.

2) You'll either need to uninstall SP2 (Control Panel, Add/Remove
programs) before attempting the upgrade, or try slipstreaming SP2 into
older WinXP installation.

For slip-streaming the service pack and subsequent updates to WinXP:

How to integrate software updates into your Windows installation source
files
http://support.microsoft.com/default...b;en-us;828930

SlipStreaming WinXP
http://www.webtree.ca/windowsxp/slipstream.htm


--

Bruce Chambers

Help us help you:
http://dts-l.org/goodpost.htm
http://www.catb.org/~esr/faqs/smart-questions.html

They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety. ~Benjamin Franklin

Many people would rather die than think; in fact, most do. ~Bertrand Russell

The philosopher has never killed any priests, whereas the priest has
killed a great many philosophers.
~ Denis Diderot

BOOT from the CD.

JoeSpareBedroom wrote:

> For reasons too strange to bother explaining, I need to use my ancient XP CD
> to install onto a laptop with a newer version. When I pop in the CD and
> start the installation, I get a message saying it can't install over a newer
> version. It also says "If you continue the world will end blah blah
> blah...), but the continue button is greyed out. The only options available
> are Cancel and More Details.
>
> How can I force this installation to do what I want?
>
>

Can't. The machine won't allow it for some eason. Give this message on a DOS
screen:

"Windows could not start because of a computer disk hardware configuration
problem. Could not read from the selected boot disk. Check boot path and
disk hardware."

More info:

- In the machine's BIOS screen, the CD drive **is** activated as a possible
boot device, 2nd in line after the HD. I tried making it #1, to no avail.

- With Windows running, there are no problems accessing the CD drive for any
other purpose.

- Tested the CD in a good machine to be sure I could boot from it. It works.


"Bob I" <birelan@yahoo.com> wrote in message
news:%23QT%23tklGIHA.4712@TK2MSFTNGP04.phx.gbl...
> BOOT from the CD.
>
> JoeSpareBedroom wrote:
>
>> For reasons too strange to bother explaining, I need to use my ancient XP
>> CD to install onto a laptop with a newer version. When I pop in the CD
>> and start the installation, I get a message saying it can't install over
>> a newer version. It also says "If you continue the world will end blah
>> blah blah...), but the continue button is greyed out. The only options
>> available are Cancel and More Details.
>>
>> How can I force this installation to do what I want?
>

"Bruce Chambers" <bchambers@cable0ne.n3t> wrote in message
news:%23v$alglGIHA.700@TK2MSFTNGP05.phx.gbl...
> JoeSpareBedroom wrote:
>> For reasons too strange to bother explaining, I need to use my ancient XP
>> CD to install onto a laptop with a newer version. When I pop in the CD
>> and start the installation, I get a message saying it can't install over
>> a newer version. It also says "If you continue the world will end blah
>> blah blah...), but the continue button is greyed out. The only options
>> available are Cancel and More Details.
>>
>> How can I force this installation to do what I want?
>
>
> You have two options:
>
> 1) Use your existing installation CD to perform a clean installation,
> formatting the hard drive as the first step.
>
> 2) You'll either need to uninstall SP2 (Control Panel, Add/Remove
> programs) before attempting the upgrade, or try slipstreaming SP2 into
> older WinXP installation.

Thanks, Bruce. The uninstall did the trick. Will research slipstreaming for
future endeavors. No time today.

Interesting, I see you got around it, good job.

JoeSpareBedroom wrote:

> Can't. The machine won't allow it for some eason. Give this message on a DOS
> screen:
>
> "Windows could not start because of a computer disk hardware configuration
> problem. Could not read from the selected boot disk. Check boot path and
> disk hardware."
>
> More info:
>
> - In the machine's BIOS screen, the CD drive **is** activated as a possible
> boot device, 2nd in line after the HD. I tried making it #1, to no avail.
>
> - With Windows running, there are no problems accessing the CD drive for any
> other purpose.
>
> - Tested the CD in a good machine to be sure I could boot from it. It works.
>
>
> "Bob I" <birelan@yahoo.com> wrote in message
> news:%23QT%23tklGIHA.4712@TK2MSFTNGP04.phx.gbl...
>
>>BOOT from the CD.
>>
>>JoeSpareBedroom wrote:
>>
>>
>>>For reasons too strange to bother explaining, I need to use my ancient XP
>>>CD to install onto a laptop with a newer version. When I pop in the CD
>>>and start the installation, I get a message saying it can't install over
>>>a newer version. It also says "If you continue the world will end blah
>>>blah blah...), but the continue button is greyed out. The only options
>>>available are Cancel and More Details.
>>>
>>>How can I force this installation to do what I want?
>>
>
>

Almost!

This computer was set upon by children, and was fraught with bizarre errors
& malfunctions. Then, a co-worker tried to help the machine's owner, which
somehow resulted in the user seeing two operating system choices, both
labeled as Windows XP. So, we figured that since all important data is
backed up, let's start from scratch.

Just finished the installation, and guess what? It's still showing two XP
installations to choose from at bootup.


"Bob I" <birelan@yahoo.com> wrote in message
news:eVt5%23hmGIHA.1212@TK2MSFTNGP05.phx.gbl...
> Interesting, I see you got around it, good job.
>
> JoeSpareBedroom wrote:
>
>> Can't. The machine won't allow it for some eason. Give this message on a
>> DOS screen:
>>
>> "Windows could not start because of a computer disk hardware
>> configuration problem. Could not read from the selected boot disk. Check
>> boot path and disk hardware."
>>
>> More info:
>>
>> - In the machine's BIOS screen, the CD drive **is** activated as a
>> possible boot device, 2nd in line after the HD. I tried making it #1, to
>> no avail.
>>
>> - With Windows running, there are no problems accessing the CD drive for
>> any other purpose.
>>
>> - Tested the CD in a good machine to be sure I could boot from it. It
>> works.
>>
>>
>> "Bob I" <birelan@yahoo.com> wrote in message
>> news:%23QT%23tklGIHA.4712@TK2MSFTNGP04.phx.gbl...
>>
>>>BOOT from the CD.
>>>
>>>JoeSpareBedroom wrote:
>>>
>>>
>>>>For reasons too strange to bother explaining, I need to use my ancient
>>>>XP CD to install onto a laptop with a newer version. When I pop in the
>>>>CD and start the installation, I get a message saying it can't install
>>>>over a newer version. It also says "If you continue the world will end
>>>>blah blah blah...), but the continue button is greyed out. The only
>>>>options available are Cancel and More Details.
>>>>
>>>>How can I force this installation to do what I want?
>>>
>>
>>
>

Then you didn't do a clean install, just a repair install. (The boot.ini file
is still the same).

GS



"JoeSpareBedroom" wrote:

> Almost!
>
> This computer was set upon by children, and was fraught with bizarre errors
> & malfunctions. Then, a co-worker tried to help the machine's owner, which
> somehow resulted in the user seeing two operating system choices, both
> labeled as Windows XP. So, we figured that since all important data is
> backed up, let's start from scratch.
>
> Just finished the installation, and guess what? It's still showing two XP
> installations to choose from at bootup.
>
>
> "Bob I" <birelan@yahoo.com> wrote in message
> news:eVt5%23hmGIHA.1212@TK2MSFTNGP05.phx.gbl...
> > Interesting, I see you got around it, good job.
> >
> > JoeSpareBedroom wrote:
> >
> >> Can't. The machine won't allow it for some eason. Give this message on a
> >> DOS screen:
> >>
> >> "Windows could not start because of a computer disk hardware
> >> configuration problem. Could not read from the selected boot disk. Check
> >> boot path and disk hardware."
> >>
> >> More info:
> >>
> >> - In the machine's BIOS screen, the CD drive **is** activated as a
> >> possible boot device, 2nd in line after the HD. I tried making it #1, to
> >> no avail.
> >>
> >> - With Windows running, there are no problems accessing the CD drive for
> >> any other purpose.
> >>
> >> - Tested the CD in a good machine to be sure I could boot from it. It
> >> works.
> >>
> >>
> >> "Bob I" <birelan@yahoo.com> wrote in message
> >> news:%23QT%23tklGIHA.4712@TK2MSFTNGP04.phx.gbl...
> >>
> >>>BOOT from the CD.
> >>>
> >>>JoeSpareBedroom wrote:
> >>>
> >>>
> >>>>For reasons too strange to bother explaining, I need to use my ancient
> >>>>XP CD to install onto a laptop with a newer version. When I pop in the
> >>>>CD and start the installation, I get a message saying it can't install
> >>>>over a newer version. It also says "If you continue the world will end
> >>>>blah blah blah...), but the continue button is greyed out. The only
> >>>>options available are Cancel and More Details.
> >>>>
> >>>>How can I force this installation to do what I want?
> >>>
> >>
> >>
> >
>
>
>

I ended up deleting the existing partition, recreating, blah blah
blah....all fixed.

Next time a friend asks if I can help with computer problems, I'm just going
to drool on their shoes and stare blankly.

Reminds me of a Dilbert cartoon. Co-worker asks "Dilbert, can you stop by my
house and fix my computer?" Dilbert says "Sure, and while I'm doing that,
you can be at my house cleaning the grout in my shower". :-)


"Gordon Shumway" <GordonShumway@discussions.microsoft.com> wrote in message
news:2EAF9D3A-3E6D-4291-BEB1-7220C692B270@microsoft.com...
> Then you didn't do a clean install, just a repair install. (The boot.ini
> file
> is still the same).
>
> GS
>
>
>
> "JoeSpareBedroom" wrote:
>
>> Almost!
>>
>> This computer was set upon by children, and was fraught with bizarre
>> errors
>> & malfunctions. Then, a co-worker tried to help the machine's owner,
>> which
>> somehow resulted in the user seeing two operating system choices, both
>> labeled as Windows XP. So, we figured that since all important data is
>> backed up, let's start from scratch.
>>
>> Just finished the installation, and guess what? It's still showing two XP
>> installations to choose from at bootup.
>>
>>
>> "Bob I" <birelan@yahoo.com> wrote in message
>> news:eVt5%23hmGIHA.1212@TK2MSFTNGP05.phx.gbl...
>> > Interesting, I see you got around it, good job.
>> >
>> > JoeSpareBedroom wrote:
>> >
>> >> Can't. The machine won't allow it for some eason. Give this message on
>> >> a
>> >> DOS screen:
>> >>
>> >> "Windows could not start because of a computer disk hardware
>> >> configuration problem. Could not read from the selected boot disk.
>> >> Check
>> >> boot path and disk hardware."
>> >>
>> >> More info:
>> >>
>> >> - In the machine's BIOS screen, the CD drive **is** activated as a
>> >> possible boot device, 2nd in line after the HD. I tried making it #1,
>> >> to
>> >> no avail.
>> >>
>> >> - With Windows running, there are no problems accessing the CD drive
>> >> for
>> >> any other purpose.
>> >>
>> >> - Tested the CD in a good machine to be sure I could boot from it. It
>> >> works.
>> >>
>> >>
>> >> "Bob I" <birelan@yahoo.com> wrote in message
>> >> news:%23QT%23tklGIHA.4712@TK2MSFTNGP04.phx.gbl...
>> >>
>> >>>BOOT from the CD.
>> >>>
>> >>>JoeSpareBedroom wrote:
>> >>>
>> >>>
>> >>>>For reasons too strange to bother explaining, I need to use my
>> >>>>ancient
>> >>>>XP CD to install onto a laptop with a newer version. When I pop in
>> >>>>the
>> >>>>CD and start the installation, I get a message saying it can't
>> >>>>install
>> >>>>over a newer version. It also says "If you continue the world will
>> >>>>end
>> >>>>blah blah blah...), but the continue button is greyed out. The only
>> >>>>options available are Cancel and More Details.
>> >>>>
>> >>>>How can I force this installation to do what I want?
>> >>>
>> >>
>> >>
>> >
>>
>>
>>

And is there actually two installations on the unit, or is one "missing"?

JoeSpareBedroom wrote:

> Almost!
>
> This computer was set upon by children, and was fraught with bizarre errors
> & malfunctions. Then, a co-worker tried to help the machine's owner, which
> somehow resulted in the user seeing two operating system choices, both
> labeled as Windows XP. So, we figured that since all important data is
> backed up, let's start from scratch.
>
> Just finished the installation, and guess what? It's still showing two XP
> installations to choose from at bootup.
>
>
> "Bob I" <birelan@yahoo.com> wrote in message
> news:eVt5%23hmGIHA.1212@TK2MSFTNGP05.phx.gbl...
>
>>Interesting, I see you got around it, good job.
>>
>>JoeSpareBedroom wrote:
>>
>>
>>>Can't. The machine won't allow it for some eason. Give this message on a
>>>DOS screen:
>>>
>>>"Windows could not start because of a computer disk hardware
>>>configuration problem. Could not read from the selected boot disk. Check
>>>boot path and disk hardware."
>>>
>>>More info:
>>>
>>>- In the machine's BIOS screen, the CD drive **is** activated as a
>>>possible boot device, 2nd in line after the HD. I tried making it #1, to
>>>no avail.
>>>
>>>- With Windows running, there are no problems accessing the CD drive for
>>>any other purpose.
>>>
>>>- Tested the CD in a good machine to be sure I could boot from it. It
>>>works.
>>>
>>>
>>>"Bob I" <birelan@yahoo.com> wrote in message
>>>news:%23QT%23tklGIHA.4712@TK2MSFTNGP04.phx.gbl. ..
>>>
>>>
>>>>BOOT from the CD.
>>>>
>>>>JoeSpareBedroom wrote:
>>>>
>>>>
>>>>
>>>>>For reasons too strange to bother explaining, I need to use my ancient
>>>>>XP CD to install onto a laptop with a newer version. When I pop in the
>>>>>CD and start the installation, I get a message saying it can't install
>>>>>over a newer version. It also says "If you continue the world will end
>>>>>blah blah blah...), but the continue button is greyed out. The only
>>>>>options available are Cancel and More Details.
>>>>>
>>>>>How can I force this installation to do what I want?
>>>>
>>>
>
>