add user in more than one group through user accounts in control panel
Hi,
In windows xp user accounts in control panel, i need to add a user in
different groups. Please advise how to do that
as i dont want to do it in Local users and group in management console.
Is that possible to do the same in user accounts in control panel ?
Re: add user in more than one group through user accounts in control panel
gchandrujs via WindowsKB.com <u25485@uwe.?.invalid> wrote on Wed, 5 Sep
2007:
>Hi,
>
>In windows xp user accounts in control panel, i need to add a user in
>different groups. Please advise how to do that
>as i dont want to do it in Local users and group in management console.
>
>Is that possible to do the same in user accounts in control panel ?
>
I don't believe so.
You can do it (provided you're an admin) in the userpasswords2 dialog
(Start | Run, type control userpasswords2, OK) by highlighting the name
of the user, clicking the Properties button then choosing the Group
Membership tab.
Another way is, from an admin account, to open a Command window and use
the Net Group or Net Localgroup command. Examples here: http://www.ss64.com/nt/net_useradmin.html
But why wouldn't you want to use Local Users and Groups?
Re: add user in more than one group through user accounts in control panel
Hi Nightowl,
Thanks for your reply.
By the way, we are in domain having around 1000 PCs. Normally we provide only
Power users group to the standard user.
When we install programming softwares like visual studio .net 2003 and when
user requires their login id to be included both in admin user group and
debug user groups.
So, everytime i am asking them to logoff from their power user id and logging
in with my admin id and giving their requirements in Local users and groups
only. Since the management console is restricted for the users id. Its only
accessible to our adminstator id.
Now, if my question gets clarified i can easily provide their requirements by
saving logoff and logon timing.
I check your options and revert back.
Thanks a lot again.
Nightowl wrote:
>gchandrujs via WindowsKB.com <u25485@uwe.?.invalid> wrote on Wed, 5 Sep
>2007:
>
>>Hi,
>>
>[quoted text clipped - 3 lines]
>>
>>Is that possible to do the same in user accounts in control panel ?
>
>I don't believe so.
>
>You can do it (provided you're an admin) in the userpasswords2 dialog
>(Start | Run, type control userpasswords2, OK) by highlighting the name
>of the user, clicking the Properties button then choosing the Group
>Membership tab.
>
>Another way is, from an admin account, to open a Command window and use
>the Net Group or Net Localgroup command. Examples here:
>http://www.ss64.com/nt/net_useradmin.html
>
>But why wouldn't you want to use Local Users and Groups?
>
Re: add user in more than one group through user accounts in control panel
Hi Nightowl
>You can do it (provided you're an admin) in the userpasswords2 dialog
>(Start | Run, type control userpasswords2, OK) by highlighting the name
>of the user, clicking the Properties button then choosing the Group
>Membership tab.
Ref the above quotes in your reply. I would like to brief u with an example
for what i am expecting.
Suppose if an domain user (MarkBouch) needs to be added in this pc in both
the power users group and Debuggers group in that pc. How can i do that when
the user is logged in that pc for the first time. I don't want MarkBouch to
logoff. So i use "control userpasswords2" and when it ask for administrator
user name and password and domain name, i give the details and then i add the
user name using "Add" button. But at the same time, i need to include in more
than one group. Thats my question.
FYI.
Please help.
Nightowl wrote:
>gchandrujs via WindowsKB.com <u25485@uwe.?.invalid> wrote on Wed, 5 Sep
>2007:
>
>>Hi,
>>
>[quoted text clipped - 3 lines]
>>
>>Is that possible to do the same in user accounts in control panel ?
>
>I don't believe so.
>
>You can do it (provided you're an admin) in the userpasswords2 dialog
>(Start | Run, type control userpasswords2, OK) by highlighting the name
>of the user, clicking the Properties button then choosing the Group
>Membership tab.
>
>Another way is, from an admin account, to open a Command window and use
>the Net Group or Net Localgroup command. Examples here:
>http://www.ss64.com/nt/net_useradmin.html
>
>But why wouldn't you want to use Local Users and Groups?
>
Re: add user in more than one group through user accounts in control panel
Hi chandra
Yes, I think I understand.
The quickest way to add a user to several groups, if you don't want to
use Local Users and Groups, is to open a command window and use the net
localgroup command.
net localgroup "power users" MarkBouch /add
net localgroup Debuggers MarkBouch /add
You can create the user account in the first place this way, too:
net user [username] [password] /add /active:yes
Unless you have a security policy in place that forbids this, Power
Users can manage local groups, so your users could add themselves to
Debuggers this way without you having to log in as admin and do it for
them. However, I think in your first post you said they also needed to
be members of the Administrators group? If that's so, that's something
they can't do themselves; only an admin has that power.
Having said all that though, it may still be necessary for the user to
log off and on again for the account changes to become active. I'm not
on a domain here so I can't check. I'm sorry I can't help more, but I'm
not an expert on this -- perhaps someone else may be able to help more.
gchandrujs via WindowsKB.com <u25485@uwe.?.invalid> wrote on Thu, 6 Sep
2007:
>Suppose if an domain user (MarkBouch) needs to be added in this pc in both
>the power users group and Debuggers group in that pc. How can i do that when
>the user is logged in that pc for the first time. I don't want MarkBouch to
>logoff. So i use "control userpasswords2" and when it ask for administrator
>user name and password and domain name, i give the details and then i add the
>user name using "Add" button. But at the same time, i need to include in more
>than one group. Thats my question.
>
>FYI.
>
>Please help.
Re: add user in more than one group through user accounts in control panel
Hi Nightowl,
I appreciate your reply and glad to inform you that its worked fine even in
domain environment. I again pleasure to convey my thanks.
Though it might looks unimportant for any readers, your reply is much useful
when we get in trouble or problems while we adding a user in multiple groups.
Your command worked successfully for domain users also.
I just given as you mentioned in your reply as the user is domain user and
when i noticed in user accounts it taken that name as a domain user and
successfully added.
Thanks again. By the way, may i get your personal email id so i will mail
you any other doubts as in future if i post anything here in the forum, it
might be unseen by you.
Thanks again.
Regards
Chandra
Nightowl wrote:
>Hi chandra
>
>Yes, I think I understand.
>
>The quickest way to add a user to several groups, if you don't want to
>use Local Users and Groups, is to open a command window and use the net
>localgroup command.
>
>net localgroup "power users" MarkBouch /add
>net localgroup Debuggers MarkBouch /add
>
>You can create the user account in the first place this way, too:
>net user [username] [password] /add /active:yes
>
>Unless you have a security policy in place that forbids this, Power
>Users can manage local groups, so your users could add themselves to
>Debuggers this way without you having to log in as admin and do it for
>them. However, I think in your first post you said they also needed to
>be members of the Administrators group? If that's so, that's something
>they can't do themselves; only an admin has that power.
>
>Having said all that though, it may still be necessary for the user to
>log off and on again for the account changes to become active. I'm not
>on a domain here so I can't check. I'm sorry I can't help more, but I'm
>not an expert on this -- perhaps someone else may be able to help more.
>
>gchandrujs via WindowsKB.com <u25485@uwe.?.invalid> wrote on Thu, 6 Sep
>2007:
>
>>Suppose if an domain user (MarkBouch) needs to be added in this pc in both
>>the power users group and Debuggers group in that pc. How can i do that when
>[quoted text clipped - 7 lines]
>>
>>Please help.
>
Re: add user in more than one group through user accounts in control panel
Hi Chandra
Great, I'm really glad to hear that worked for you and was useful.
You're always welcome to email me (my Reply-To address works:-) but in
all honesty, you'd be far more likely to get an answer from the forum on
anything to do with networking or domains. I'm just a single home user.
gchandrujs via WindowsKB.com <u25485@uwe.?.invalid> wrote on Sat, 8 Sep
2007:
>I appreciate your reply and glad to inform you that its worked fine even in
>domain environment. I again pleasure to convey my thanks.
>
>Though it might looks unimportant for any readers, your reply is much useful
>when we get in trouble or problems while we adding a user in multiple groups.
>Your command worked successfully for domain users also.
>
>I just given as you mentioned in your reply as the user is domain user and
>when i noticed in user accounts it taken that name as a domain user and
>successfully added.
>
>Thanks again. By the way, may i get your personal email id so i will mail
>you any other doubts as in future if i post anything here in the forum, it
>might be unseen by you.
>
>Thanks again.
>
>Regards
>Chandra
>
>
>Nightowl wrote:
>>Hi chandra
>>
>>Yes, I think I understand.
>>
>>The quickest way to add a user to several groups, if you don't want to
>>use Local Users and Groups, is to open a command window and use the net
>>localgroup command.
>>
>>net localgroup "power users" MarkBouch /add
>>net localgroup Debuggers MarkBouch /add
>>
>>You can create the user account in the first place this way, too:
>>net user [username] [password] /add /active:yes
>>
>>Unless you have a security policy in place that forbids this, Power
>>Users can manage local groups, so your users could add themselves to
>>Debuggers this way without you having to log in as admin and do it for
>>them. However, I think in your first post you said they also needed to
>>be members of the Administrators group? If that's so, that's something
>>they can't do themselves; only an admin has that power.
>>
>>Having said all that though, it may still be necessary for the user to
>>log off and on again for the account changes to become active. I'm not
>>on a domain here so I can't check. I'm sorry I can't help more, but I'm
>>not an expert on this -- perhaps someone else may be able to help more.
>>
>>gchandrujs via WindowsKB.com <u25485@uwe.?.invalid> wrote on Thu, 6 Sep
>>2007:
>>
>>>Suppose if an domain user (MarkBouch) needs to be added in this pc in both
>>>the power users group and Debuggers group in that pc. How can i do that when
>>[quoted text clipped - 7 lines]
>>>
>>>Please help.
>>
>
Re: add user in more than one group through user accounts in control panel
Hi Nightowl,
Though you are a home user, it seems you are more strong in the basic
concepts in computers.
Normally, whatever you say, those who are strong in basic things only shine
good and grow n IT.
Thanks a lot.
Regards
Chandra.
Nightowl wrote:
>Hi Chandra
>
>Great, I'm really glad to hear that worked for you and was useful.
>
>You're always welcome to email me (my Reply-To address works:-) but in
>all honesty, you'd be far more likely to get an answer from the forum on
>anything to do with networking or domains. I'm just a single home user.
>
>gchandrujs via WindowsKB.com <u25485@uwe.?.invalid> wrote on Sat, 8 Sep
>2007:
>
>>I appreciate your reply and glad to inform you that its worked fine even in
>>domain environment. I again pleasure to convey my thanks.
>[quoted text clipped - 50 lines]
>>>>
>>>>Please help.
>
Re: add user in more than one group through user accounts in control panel
Chandra via WindowsKB.com <u25485@uwe.?.invalid> wrote on Sun, 9 Sep
2007:
>Though you are a home user, it seems you are more strong in the basic
>concepts in computers.
>
>Normally, whatever you say, those who are strong in basic things only shine
>good and grow n IT.
That's a very nice thing to say; thank you, Chandra. I certainly love
computers and there is always something new to learn -- that's why I
read this group. We learn a lot from each other here.
Nightowl wrote:
>Chandra via WindowsKB.com <u25485@uwe.?.invalid> wrote on Sun, 9 Sep
>2007:
>
>>Though you are a home user, it seems you are more strong in the basic
>>concepts in computers.
>>
>>Normally, whatever you say, those who are strong in basic things only shine
>>good and grow n IT.
>
>That's a very nice thing to say; thank you, Chandra. I certainly love
>computers and there is always something new to learn -- that's why I
>read this group. We learn a lot from each other here.
>
>Best wishes,
add user in more than one group through user accounts in control panel 
Linear Mode
