ah wrote:
> A Google search showed me that I was not the only one having this problem.
> If someone could please help.
>
>
Please do not make a new post about the same subject only a few minutes
apart. Patience is a virtue. I already answered your first post. If you
can't find it, use Google Groups Advanced Search and search for your
name and/or subject.
I have not posted on this Newsgroups for several months.
--
ah
"Malke" <notreally@invalid.invalid> wrote in message
news:eFhYzypqHHA.4624@TK2MSFTNGP06.phx.gbl...
> ah wrote:
>> A Google search showed me that I was not the only one having this
>> problem. If someone could please help.
>
> Please do not make a new post about the same subject only a few minutes
> apart. Patience is a virtue. I already answered your first post. If you
> can't find it, use Google Groups Advanced Search and search for your name
> and/or subject.
>
>
> Malke
> --
> Elephant Boy Computers
> www.elephantboycomputers.com
> "Don't Panic!"
> MS-MVP Windows - Shell/User
My problem is different from saleroso's. When I open Add Remove programs, I
have the message Please wait until the list is populated and the list is
_never_ populated. I was able to see the list being populated when I
started in safe mode.
I went to Kelly's Korner and downloaded autocaddadremovefix and
autodesklanddesktop3 and tried them but they didn't cure the problem because
my problem is not a blank in add remove programs but the list never gets
populated.
Actually I didn't see my problem listed in Windows XP A to Z.
I hope that someone can help.
--
ah
"Malke" <notreally@invalid.invalid> wrote in message
news:eFhYzypqHHA.4624@TK2MSFTNGP06.phx.gbl...
> ah wrote:
>> A Google search showed me that I was not the only one having this
>> problem. If someone could please help.
>
> Please do not make a new post about the same subject only a few minutes
> apart. Patience is a virtue. I already answered your first post. If you
> can't find it, use Google Groups Advanced Search and search for your name
> and/or subject.
>
>
> Malke
> --
> Elephant Boy Computers
> www.elephantboycomputers.com
> "Don't Panic!"
> MS-MVP Windows - Shell/User
"ah" <anonewsgr@hotmail.com> wrote in message news:uzHKIVqqHHA.3356@TK2MSFTNGP03.phx.gbl...
My problem is different from saleroso's. When I open Add Remove programs, I
have the message Please wait until the list is populated and the list is
_never_ populated. I was able to see the list being populated when I
started in safe mode.
I went to Kelly's Korner and downloaded autocaddadremovefix and
autodesklanddesktop3 and tried them but they didn't cure the problem because
my problem is not a blank in add remove programs but the list never gets
populated.
Actually I didn't see my problem listed in Windows XP A to Z.
I hope that someone can help.
--
ah
"Malke" <notreally@invalid.invalid> wrote in message
news:eFhYzypqHHA.4624@TK2MSFTNGP06.phx.gbl...
> ah wrote:
>> A Google search showed me that I was not the only one having this
>> problem. If someone could please help.
>
> Please do not make a new post about the same subject only a few minutes
> apart. Patience is a virtue. I already answered your first post. If you
> can't find it, use Google Groups Advanced Search and search for your name
> and/or subject.
>
>
> Malke
> --
> Elephant Boy Computers
> www.elephantboycomputers.com
> "Don't Panic!"
> MS-MVP Windows - Shell/User
>> Is your system connected to a network (domain or a workgroup)? <<
No, just connected to my WiFi router.
I did 2 system restore, one to this morning 7am status because I thought
that something I did later this morning may have provoked this but it did
not cure the problem so I did another one to 5 days ago but same: didn't
cure. So I am now going to go back to this afternoon's status.
--
ah
"Ramesh, MS-MVP" <ramesh@XOX.mvps.org> wrote in message
news:OiL$o2qqHHA.532@TK2MSFTNGP06.phx.gbl...
Hi ah,
Yet another problem which remains unresolved for years!
Is your system connected to a network (domain or a workgroup)?
"ah" <anonewsgr@hotmail.com> wrote in message
news:uzHKIVqqHHA.3356@TK2MSFTNGP03.phx.gbl...
My problem is different from saleroso's. When I open Add Remove programs, I
have the message Please wait until the list is populated and the list is
_never_ populated. I was able to see the list being populated when I
started in safe mode.
I went to Kelly's Korner and downloaded autocaddadremovefix and
autodesklanddesktop3 and tried them but they didn't cure the problem because
my problem is not a blank in add remove programs but the list never gets
populated.
Actually I didn't see my problem listed in Windows XP A to Z.
I hope that someone can help.
--
ah
"Malke" <notreally@invalid.invalid> wrote in message
news:eFhYzypqHHA.4624@TK2MSFTNGP06.phx.gbl...
> ah wrote:
>> A Google search showed me that I was not the only one having this
>> problem. If someone could please help.
>
> Please do not make a new post about the same subject only a few minutes
> apart. Patience is a virtue. I already answered your first post. If you
> can't find it, use Google Groups Advanced Search and search for your name
> and/or subject.
>
>
> Malke
> --
> Elephant Boy Computers
> www.elephantboycomputers.com
> "Don't Panic!"
> MS-MVP Windows - Shell/User
My guess is that the system is trying to access a file (icon file) in a network location, or from another physical hard drive and fails. Perhaps you can send me the export of this registry key, so that I'll try to replicate the problem.
"ah" <anonewsgr@hotmail.com> wrote in message news:OKW5mOrqHHA.4548@TK2MSFTNGP03.phx.gbl...
>> Is your system connected to a network (domain or a workgroup)? <<
No, just connected to my WiFi router.
I did 2 system restore, one to this morning 7am status because I thought
that something I did later this morning may have provoked this but it did
not cure the problem so I did another one to 5 days ago but same: didn't
cure. So I am now going to go back to this afternoon's status.
--
ah
"Ramesh, MS-MVP" <ramesh@XOX.mvps.org> wrote in message
news:OiL$o2qqHHA.532@TK2MSFTNGP06.phx.gbl...
Hi ah,
Yet another problem which remains unresolved for years!
Is your system connected to a network (domain or a workgroup)?
"ah" <anonewsgr@hotmail.com> wrote in message
news:uzHKIVqqHHA.3356@TK2MSFTNGP03.phx.gbl...
My problem is different from saleroso's. When I open Add Remove programs, I
have the message Please wait until the list is populated and the list is
_never_ populated. I was able to see the list being populated when I
started in safe mode.
I went to Kelly's Korner and downloaded autocaddadremovefix and
autodesklanddesktop3 and tried them but they didn't cure the problem because
my problem is not a blank in add remove programs but the list never gets
populated.
Actually I didn't see my problem listed in Windows XP A to Z.
I hope that someone can help.
--
ah
"Malke" <notreally@invalid.invalid> wrote in message
news:eFhYzypqHHA.4624@TK2MSFTNGP06.phx.gbl...
> ah wrote:
>> A Google search showed me that I was not the only one having this
>> problem. If someone could please help.
>
> Please do not make a new post about the same subject only a few minutes
> apart. Patience is a virtue. I already answered your first post. If you
> can't find it, use Google Groups Advanced Search and search for your name
> and/or subject.
>
>
> Malke
> --
> Elephant Boy Computers
> www.elephantboycomputers.com
> "Don't Panic!"
> MS-MVP Windows - Shell/User
I emailed you the requested file and downloaded myuninst. Thank you very
much for your kind help.
--
ah
"Ramesh, MS-MVP" <ramesh@XOX.mvps.org> wrote in message
news:eKZym70qHHA.4324@TK2MSFTNGP04.phx.gbl...
My guess is that the system is trying to access a file (icon file) in a
network location, or from another physical hard drive and fails. Perhaps you
can send me the export of this registry key, so that I'll try to replicate
the problem.
"ah" <anonewsgr@hotmail.com> wrote in message
news:OKW5mOrqHHA.4548@TK2MSFTNGP03.phx.gbl...
>> Is your system connected to a network (domain or a workgroup)? <<
No, just connected to my WiFi router.
I did 2 system restore, one to this morning 7am status because I thought
that something I did later this morning may have provoked this but it did
not cure the problem so I did another one to 5 days ago but same: didn't
cure. So I am now going to go back to this afternoon's status.
--
ah
"Ramesh, MS-MVP" <ramesh@XOX.mvps.org> wrote in message
news:OiL$o2qqHHA.532@TK2MSFTNGP06.phx.gbl...
Hi ah,
Yet another problem which remains unresolved for years!
Is your system connected to a network (domain or a workgroup)?
"ah" <anonewsgr@hotmail.com> wrote in message
news:uzHKIVqqHHA.3356@TK2MSFTNGP03.phx.gbl...
My problem is different from saleroso's. When I open Add Remove programs, I
have the message Please wait until the list is populated and the list is
_never_ populated. I was able to see the list being populated when I
started in safe mode.
I went to Kelly's Korner and downloaded autocaddadremovefix and
autodesklanddesktop3 and tried them but they didn't cure the problem because
my problem is not a blank in add remove programs but the list never gets
populated.
Actually I didn't see my problem listed in Windows XP A to Z.
I hope that someone can help.
--
ah
"Malke" <notreally@invalid.invalid> wrote in message
news:eFhYzypqHHA.4624@TK2MSFTNGP06.phx.gbl...
> ah wrote:
>> A Google search showed me that I was not the only one having this
>> problem. If someone could please help.
>
> Please do not make a new post about the same subject only a few minutes
> apart. Patience is a virtue. I already answered your first post. If you
> can't find it, use Google Groups Advanced Search and search for your name
> and/or subject.
>
>
> Malke
> --
> Elephant Boy Computers
> www.elephantboycomputers.com
> "Don't Panic!"
> MS-MVP Windows - Shell/User
add remove programs list empty 
Linear Mode
