Input Signal

I have a problem with the window XP Home edition. I havve a graphic card
installed 2 months ago. When i boot the pc, I hear a beep then the Windows XP
page loads and the bar shows the movements. Then for whatever reason, the pc
loops back to the start of the boot page and continues to loop back. Just
before the Windows XP page loads, there is a options pages of LKGC, Safe
mode, and resumes normally. Tried all but still loops back. After the Windows
XP page loads, it says no input signal before looping back to the start of
the boot process. HELP!!

Also.. I have tried Windows 98 boot disk but no joy. Haven't a Windows XP
cd. Would that work via recovery console? Thought monitor problem with the no
input signal message but that doesn't explain the looping back to start of
boot process...

i should also mention that no problems with the PC has shown up until now.

"michuk" wrote:

>
> I have a problem with the window XP Home edition. I havve a graphic card
> installed 2 months ago. When i boot the pc, I hear a beep then the Windows XP
> page loads and the bar shows the movements. Then for whatever reason, the pc
> loops back to the start of the boot page and continues to loop back. Just
> before the Windows XP page loads, there is a options pages of LKGC, Safe
> mode, and resumes normally. Tried all but still loops back. After the Windows
> XP page loads, it says no input signal before looping back to the start of
> the boot process. HELP!!
>
> Also.. I have tried Windows 98 boot disk but no joy. Haven't a Windows XP
> cd. Would that work via recovery console? Thought monitor problem with the no
> input signal message but that doesn't explain the looping back to start of
> boot process...
>

"michuk" <michuk@discussions.microsoft.com> wrote in message
news:54ACA51D-A89B-4B2F-B4A8-F8AEF974254B@microsoft.com...
>i should also mention that no problems with the PC has shown up until now.
>
> "michuk" wrote:
>
>>
>> I have a problem with the window XP Home edition. I havve a graphic card
>> installed 2 months ago. When i boot the pc, I hear a beep then the
>> Windows XP
>> page loads and the bar shows the movements. Then for whatever reason, the
>> pc
>> loops back to the start of the boot page and continues to loop back. Just
>> before the Windows XP page loads, there is a options pages of LKGC, Safe
>> mode, and resumes normally. Tried all but still loops back. After the
>> Windows
>> XP page loads, it says no input signal before looping back to the start
>> of
>> the boot process. HELP!!
>>
>> Also.. I have tried Windows 98 boot disk but no joy. Haven't a Windows XP
>> cd. Would that work via recovery console? Thought monitor problem with
>> the no
>> input signal message but that doesn't explain the looping back to start
>> of
>> boot process...
>>
The beep comes from the BIOS. It usually indicates a problem with the
hardware.
The documentation for the BIOS in your computer should tell you what the
beep means.
Jim

Hi Jim... It's AMI Bios.. 1 Beep is refresh failure. The memory refresh
circuitry is faulty. Are the symptons similar to the error? And what do you
suggest to repair it?

"Jim" wrote:

>
> "michuk" <michuk@discussions.microsoft.com> wrote in message
> news:54ACA51D-A89B-4B2F-B4A8-F8AEF974254B@microsoft.com...
> >i should also mention that no problems with the PC has shown up until now.
> >
> > "michuk" wrote:
> >
> >>
> >> I have a problem with the window XP Home edition. I havve a graphic card
> >> installed 2 months ago. When i boot the pc, I hear a beep then the
> >> Windows XP
> >> page loads and the bar shows the movements. Then for whatever reason, the
> >> pc
> >> loops back to the start of the boot page and continues to loop back. Just
> >> before the Windows XP page loads, there is a options pages of LKGC, Safe
> >> mode, and resumes normally. Tried all but still loops back. After the
> >> Windows
> >> XP page loads, it says no input signal before looping back to the start
> >> of
> >> the boot process. HELP!!
> >>
> >> Also.. I have tried Windows 98 boot disk but no joy. Haven't a Windows XP
> >> cd. Would that work via recovery console? Thought monitor problem with
> >> the no
> >> input signal message but that doesn't explain the looping back to start
> >> of
> >> boot process...
> >>
> The beep comes from the BIOS. It usually indicates a problem with the
> hardware.
> The documentation for the BIOS in your computer should tell you what the
> beep means.
> Jim
>
>
>