Windows cannot access the specified device... (Vista)

Hi at all,

I have Windows Vista bussiness edition. Until this morning it works fine,
but when
I updated it with the last available updates from Microsoft and many turn
off and restarts it's start to have some problems.
I logged on as Administrator and whenever I executed something , iexplorer,
firefox, control panel, or every other things it told me
"Windows cannot access the specified device....", even the turn off button.
To turn off Vista I must log off myself and from there turn off Vista.
Is it a virus? is it an microsoft's update problem?
Is there anyone have the some problem of mine?

thanks a lot
roberto

Have you tried System Restore? A point is created for each update session.

--
Was this helpful? Then click the "Yes" Ratings button. Voting helps the web
interface.
http://www.microsoft.com/wn3/locales....htm#RateAPost

Mark L. Ferguson

..
"robbio" <roberto674@supereva.it> wrote in message
news:eqkpFGueIHA.3940@TK2MSFTNGP05.phx.gbl...
> Hi at all,
>
> I have Windows Vista bussiness edition. Until this morning it works fine,
> but when
> I updated it with the last available updates from Microsoft and many turn
> off and restarts it's start to have some problems.
> I logged on as Administrator and whenever I executed something ,
> iexplorer, firefox, control panel, or every other things it told me
> "Windows cannot access the specified device....", even the turn off
> button. To turn off Vista I must log off myself and from there turn off
> Vista.
> Is it a virus? is it an microsoft's update problem?
> Is there anyone have the some problem of mine?
>
> thanks a lot
> roberto
>
>
>

Not yet. Because I didn't know if there was a simple solution or not for my
problem.
Where the "Sysem Restore" feature is? keep in mind I'ma not able to go to
the control panel...

thanks
roberto

"Mark L. Ferguson" <MarkLFerguson@discussions.microsoft.com> wrote in
message news:uQAGNPueIHA.748@TK2MSFTNGP04.phx.gbl...
> Have you tried System Restore? A point is created for each update session.
>
> --
> Was this helpful? Then click the "Yes" Ratings button. Voting helps the
> web
> interface.
> http://www.microsoft.com/wn3/locales....htm#RateAPost
>
> Mark L. Ferguson
>
> .
> "robbio" <roberto674@supereva.it> wrote in message
> news:eqkpFGueIHA.3940@TK2MSFTNGP05.phx.gbl...
>> Hi at all,
>>
>> I have Windows Vista bussiness edition. Until this morning it works fine,
>> but when
>> I updated it with the last available updates from Microsoft and many
>> turn off and restarts it's start to have some problems.
>> I logged on as Administrator and whenever I executed something ,
>> iexplorer, firefox, control panel, or every other things it told me
>> "Windows cannot access the specified device....", even the turn off
>> button. To turn off Vista I must log off myself and from there turn off
>> Vista.
>> Is it a virus? is it an microsoft's update problem?
>> Is there anyone have the some problem of mine?
>>
>> thanks a lot
>> roberto
>>
>>
>>
>

Boot to the Safe Mode menu (Press F8 on restart. during the 'black screen'
after the BIOS screen), choose "Safe Mode with Command Prompt".

HOW TO Start System Restore Tool from Command Prompt (Q304449):
http://support.microsoft.com/support.../q304/4/49.asp

--
Was this helpful? Then click the "Yes" Ratings button. Voting helps the web
interface.
http://www.microsoft.com/wn3/locales....htm#RateAPost

Mark L. Ferguson

..
"robbio" <roberto674@supereva.it> wrote in message
news:uYL9LVueIHA.4260@TK2MSFTNGP05.phx.gbl...
> Not yet. Because I didn't know if there was a simple solution or not for
> my problem.
> Where the "Sysem Restore" feature is? keep in mind I'ma not able to go to
> the control panel...
>
> thanks
> roberto
>
> "Mark L. Ferguson" <MarkLFerguson@discussions.microsoft.com> wrote in
> message news:uQAGNPueIHA.748@TK2MSFTNGP04.phx.gbl...
>> Have you tried System Restore? A point is created for each update
>> session.
>>
>> --
>> Was this helpful? Then click the "Yes" Ratings button. Voting helps the
>> web
>> interface.
>> http://www.microsoft.com/wn3/locales....htm#RateAPost
>>
>> Mark L. Ferguson
>>
>> .
>> "robbio" <roberto674@supereva.it> wrote in message
>> news:eqkpFGueIHA.3940@TK2MSFTNGP05.phx.gbl...
>>> Hi at all,
>>>
>>> I have Windows Vista bussiness edition. Until this morning it works
>>> fine, but when
>>> I updated it with the last available updates from Microsoft and many
>>> turn off and restarts it's start to have some problems.
>>> I logged on as Administrator and whenever I executed something ,
>>> iexplorer, firefox, control panel, or every other things it told me
>>> "Windows cannot access the specified device....", even the turn off
>>> button. To turn off Vista I must log off myself and from there turn off
>>> Vista.
>>> Is it a virus? is it an microsoft's update problem?
>>> Is there anyone have the some problem of mine?
>>>
>>> thanks a lot
>>> roberto
>>>
>>>
>>>
>>
>
>

Not much help to you but I am having the same problem with my Windows Vista
Home Premium. I updated and now can't do anything and have tried to reboot
under safe mode but it keeps going back to the same page saying Configuration
update stage 3. 0% complete then re-starting again. Have you had any luck?

"robbio" wrote:

> Hi at all,
>
> I have Windows Vista bussiness edition. Until this morning it works fine,
> but when
> I updated it with the last available updates from Microsoft and many turn
> off and restarts it's start to have some problems.
> I logged on as Administrator and whenever I executed something , iexplorer,
> firefox, control panel, or every other things it told me
> "Windows cannot access the specified device....", even the turn off button.
> To turn off Vista I must log off myself and from there turn off Vista.
> Is it a virus? is it an microsoft's update problem?
> Is there anyone have the some problem of mine?
>
> thanks a lot
> roberto
>
>
>
>

Hi Shirley,
Yes, I was lucky, the problem aren' microsoft updates, but my COMODO
firewall (software firewall). When I updated my pc with the last microsoft's
update
I update also the COMODO firewall with a newer version. When I uninstalled
COMODO firewall fom my Vista all come right. Maybe there is an
incompatibility issue between COMODO and the last microsoft updates.
This works for me.

I hope it helps you.
roberto


"Shirley" <Shirley@discussions.microsoft.com> wrote in message
newsBCCA63A-5A87-4F4F-A666-DAC29ED09044@microsoft.com...
> Not much help to you but I am having the same problem with my Windows
> Vista
> Home Premium. I updated and now can't do anything and have tried to reboot
> under safe mode but it keeps going back to the same page saying
> Configuration
> update stage 3. 0% complete then re-starting again. Have you had any luck?
>
> "robbio" wrote:
>
>> Hi at all,
>>
>> I have Windows Vista bussiness edition. Until this morning it works fine,
>> but when
>> I updated it with the last available updates from Microsoft and many
>> turn
>> off and restarts it's start to have some problems.
>> I logged on as Administrator and whenever I executed something ,
>> iexplorer,
>> firefox, control panel, or every other things it told me
>> "Windows cannot access the specified device....", even the turn off
>> button.
>> To turn off Vista I must log off myself and from there turn off Vista.
>> Is it a virus? is it an microsoft's update problem?
>> Is there anyone have the some problem of mine?
>>
>> thanks a lot
>> roberto
>>
>>
>>
>>

I too am using Comodo Firewall, but I didn't want to uninstall it. I found
that opening the interface, manually selecting Installation Mode, then
running the install did the trick.

"robbio" wrote:

> Hi Shirley,
> Yes, I was lucky, the problem aren' microsoft updates, but my COMODO
> firewall (software firewall). When I updated my pc with the last microsoft's
> update
> I update also the COMODO firewall with a newer version. When I uninstalled
> COMODO firewall fom my Vista all come right. Maybe there is an
> incompatibility issue between COMODO and the last microsoft updates.
> This works for me.
>
> I hope it helps you.
> roberto
>
>
> "Shirley" <Shirley@discussions.microsoft.com> wrote in message
> newsBCCA63A-5A87-4F4F-A666-DAC29ED09044@microsoft.com...
> > Not much help to you but I am having the same problem with my Windows
> > Vista
> > Home Premium. I updated and now can't do anything and have tried to reboot
> > under safe mode but it keeps going back to the same page saying
> > Configuration
> > update stage 3. 0% complete then re-starting again. Have you had any luck?
> >
> > "robbio" wrote:
> >
> >> Hi at all,
> >>
> >> I have Windows Vista bussiness edition. Until this morning it works fine,
> >> but when
> >> I updated it with the last available updates from Microsoft and many
> >> turn
> >> off and restarts it's start to have some problems.
> >> I logged on as Administrator and whenever I executed something ,
> >> iexplorer,
> >> firefox, control panel, or every other things it told me
> >> "Windows cannot access the specified device....", even the turn off
> >> button.
> >> To turn off Vista I must log off myself and from there turn off Vista.
> >> Is it a virus? is it an microsoft's update problem?
> >> Is there anyone have the some problem of mine?
> >>
> >> thanks a lot
> >> roberto
> >>
> >>
> >>
> >>
>
>
>