Norton internet security

I have tried to unregister the symlcrst.dll file in the command prompt.All
i keep on getting the module could not be found and when i try to delelte
this file i get the fault code 0x80070570
So i cannot unreg this file
I cannot delete this file in safe mode
Any help appreciated
Paul

Hi Paul.

Try this site first.....
http://service1.symantec.com/SUPPORT...nip.nsf&view=0

Then at the very bottom on this site read the last post....
http://forums.majorgeeks.com/showthread.php?t=103518

All the best,
SG


"PAUL&GINA" <P_SKINNER@nobody.com> wrote in message
news:eLhXsfQKIHA.748@TK2MSFTNGP04.phx.gbl...
>I have tried to unregister the symlcrst.dll file in the command
>prompt.All
> i keep on getting the module could not be found and when i try to delelte
> this file i get the fault code 0x80070570
> So i cannot unreg this file
> I cannot delete this file in safe mode
> Any help appreciated
> Paul

Have you been trying to unregister it from an administrative command prompt?

Type cmd in the start/search box, and when cmd.exe appears in the list
above, right-click on it and select "Run as administrator"

Type regsvr32 /u symlcrst.dll then hit enter. Does that tell you that the
command was successful?

Have you run the Norton removal tool from the Norton/Symantec website?

What problems are you having that lead you to want to unregister this
particular .dll?

--
Jane, not plain 64 bit enabled :-)
Batteries not included. Braincell on vacation ;-)
MVP Windows Shell/User

"PAUL&GINA" <P_SKINNER@nobody.com> wrote in message
news:eLhXsfQKIHA.748@TK2MSFTNGP04.phx.gbl...
>I have tried to unregister the symlcrst.dll file in the command
>prompt.All
> i keep on getting the module could not be found and when i try to delelte
> this file i get the fault code 0x80070570
> So i cannot unreg this file
> I cannot delete this file in safe mode
> Any help appreciated
> Paul

It all Started one morning, I had a fault on the software and it advised me
reinstall the software compltly,i did notice some thing strange about this
fault it said the antiphilsing was off.So I went about unistalling the
norton internet security by the removal tool i downloaded prevoiusly,i
deleted the synmantic live udate manger from the pc.Then i went about
reinstalling the software,it got as far as symLCSVC.EXE file ,then the
message appeared in the bottom right hand of the screen that a corrupted and
unreadle file had occured that being symlcrst.dll.I thought nothing of it
,the software was still loading.When it finished loading i got a message
that activating after i while the message dissappeared and box came up
saying there was a product fault and i had reinstal the programe so i went
about it again and again and still the same fault came up.I them went find
the file it is programe/commonfile/synmanticshared folder I tried to delete
the folder but was unable,i got the code 0x80070570.I went into the folder
deleted everything i could except for this dam dll file
Hope this helps
"Jane C" <janecolman@invalid.iinet.net.au> wrote in message
news:3E895D16-A617-43FF-902B-06E3ABAB165F@microsoft.com...
> Have you been trying to unregister it from an administrative command
> prompt?
>
> Type cmd in the start/search box, and when cmd.exe appears in the list
> above, right-click on it and select "Run as administrator"yes
>
> Type regsvr32 /u symlcrst.dll then hit enter. Does that tell you that the
> command was successful? get module fail to load
>
> Have you run the Norton removal tool from the Norton/Symantec website?yes
> What problems are you having that lead you to want to unregister this as
> above particular .dll?
>
> --
> Jane, not plain 64 bit enabled :-)
> Batteries not included. Braincell on vacation ;-)
> MVP Windows Shell/User
>
> "PAUL&GINA" <P_SKINNER@nobody.com> wrote in message
> news:eLhXsfQKIHA.748@TK2MSFTNGP04.phx.gbl...
>>I have tried to unregister the symlcrst.dll file in the command
>>prompt.All
>> i keep on getting the module could not be found and when i try to delelte
>> this file i get the fault code 0x80070570
>> So i cannot unreg this file
>> I cannot delete this file in safe mode
>> Any help appreciated
>> Paul
>

went to the services bit it sugested got the same fault up 0x80070570 the
file or directory is corruted and unreadable
"SG" <nomail@sorry.com> wrote in message
news:%23Ukcu2QKIHA.3916@TK2MSFTNGP02.phx.gbl...
> Hi Paul.
>
> Try this site first.....
> http://service1.symantec.com/SUPPORT...nip.nsf&view=0
>
> Then at the very bottom on this site read the last post....
> http://forums.majorgeeks.com/showthread.php?t=103518
>
> All the best,
> SG
>
>
> "PAUL&GINA" <P_SKINNER@nobody.com> wrote in message
> news:eLhXsfQKIHA.748@TK2MSFTNGP04.phx.gbl...
>>I have tried to unregister the symlcrst.dll file in the command
>>prompt.All
>> i keep on getting the module could not be found and when i try to delelte
>> this file i get the fault code 0x80070570
>> So i cannot unreg this file
>> I cannot delete this file in safe mode
>> Any help appreciated
>> Paul
>
>

This is your second post about this.

Jane C suggested a command prompt, and report back to her.

You can't be bothered taking advice, so go away!!!



"PAUL&GINA" wrote:

> It all Started one morning, I had a fault on the software and it advised me
> reinstall the software compltly,i did notice some thing strange about this
> fault it said the antiphilsing was off.So I went about unistalling the
> norton internet security by the removal tool i downloaded prevoiusly,i
> deleted the synmantic live udate manger from the pc.Then i went about
> reinstalling the software,it got as far as symLCSVC.EXE file ,then the
> message appeared in the bottom right hand of the screen that a corrupted and
> unreadle file had occured that being symlcrst.dll.I thought nothing of it
> ,the software was still loading.When it finished loading i got a message
> that activating after i while the message dissappeared and box came up
> saying there was a product fault and i had reinstal the programe so i went
> about it again and again and still the same fault came up.I them went find
> the file it is programe/commonfile/synmanticshared folder I tried to delete
> the folder but was unable,i got the code 0x80070570.I went into the folder
> deleted everything i could except for this dam dll file
> Hope this helps
> "Jane C" <janecolman@invalid.iinet.net.au> wrote in message
> news:3E895D16-A617-43FF-902B-06E3ABAB165F@microsoft.com...
> > Have you been trying to unregister it from an administrative command
> > prompt?
> >
> > Type cmd in the start/search box, and when cmd.exe appears in the list
> > above, right-click on it and select "Run as administrator"yes
> >
> > Type regsvr32 /u symlcrst.dll then hit enter. Does that tell you that the
> > command was successful? get module fail to load
> >
> > Have you run the Norton removal tool from the Norton/Symantec website?yes
> > What problems are you having that lead you to want to unregister this as
> > above particular .dll?
> >
> > --
> > Jane, not plain 64 bit enabled :-)
> > Batteries not included. Braincell on vacation ;-)
> > MVP Windows Shell/User
> >
> > "PAUL&GINA" <P_SKINNER@nobody.com> wrote in message
> > news:eLhXsfQKIHA.748@TK2MSFTNGP04.phx.gbl...
> >>I have tried to unregister the symlcrst.dll file in the command
> >>prompt.All
> >> i keep on getting the module could not be found and when i try to delelte
> >> this file i get the fault code 0x80070570
> >> So i cannot unreg this file
> >> I cannot delete this file in safe mode
> >> Any help appreciated
> >> Paul
> >
>
>

Mick i did try the cmd prompt as jan suggested
"Mick Murphy" <MickMurphy@discussions.microsoft.com> wrote in message
news:C8F65F08-7514-44C4-8998-C02EDB9FD3CA@microsoft.com...
> This is your second post about this.
>
> Jane C suggested a command prompt, and report back to her.
>
> You can't be bothered taking advice, so go away!!!
>
>
>
> "PAUL&GINA" wrote:
>
>> It all Started one morning, I had a fault on the software and it advised
>> me
>> reinstall the software compltly,i did notice some thing strange about
>> this
>> fault it said the antiphilsing was off.So I went about unistalling the
>> norton internet security by the removal tool i downloaded prevoiusly,i
>> deleted the synmantic live udate manger from the pc.Then i went about
>> reinstalling the software,it got as far as symLCSVC.EXE file ,then the
>> message appeared in the bottom right hand of the screen that a corrupted
>> and
>> unreadle file had occured that being symlcrst.dll.I thought nothing of it
>> ,the software was still loading.When it finished loading i got a message
>> that activating after i while the message dissappeared and box came up
>> saying there was a product fault and i had reinstal the programe so i
>> went
>> about it again and again and still the same fault came up.I them went
>> find
>> the file it is programe/commonfile/synmanticshared folder I tried to
>> delete
>> the folder but was unable,i got the code 0x80070570.I went into the
>> folder
>> deleted everything i could except for this dam dll file
>> Hope this helps
>> "Jane C" <janecolman@invalid.iinet.net.au> wrote in message
>> news:3E895D16-A617-43FF-902B-06E3ABAB165F@microsoft.com...
>> > Have you been trying to unregister it from an administrative command
>> > prompt?
>> >
>> > Type cmd in the start/search box, and when cmd.exe appears in the list
>> > above, right-click on it and select "Run as administrator"yes
>> >
>> > Type regsvr32 /u symlcrst.dll then hit enter. Does that tell you that
>> > the
>> > command was successful? get module fail to load
>> >
>> > Have you run the Norton removal tool from the Norton/Symantec
>> > website?yes
>> > What problems are you having that lead you to want to unregister this
>> > as
>> > above particular .dll?
>> >
>> > --
>> > Jane, not plain 64 bit enabled :-)
>> > Batteries not included. Braincell on vacation ;-)
>> > MVP Windows Shell/User
>> >
>> > "PAUL&GINA" <P_SKINNER@nobody.com> wrote in message
>> > news:eLhXsfQKIHA.748@TK2MSFTNGP04.phx.gbl...
>> >>I have tried to unregister the symlcrst.dll file in the command
>> >>prompt.All
>> >> i keep on getting the module could not be found and when i try to
>> >> delelte
>> >> this file i get the fault code 0x80070570
>> >> So i cannot unreg this file
>> >> I cannot delete this file in safe mode
>> >> Any help appreciated
>> >> Paul
>> >
>>
>>

mick thiswhat i got


> > Type cmd in the start/search box, and when cmd.exe appears in the list
> > above, right-click on it and select "Run as administrator"yes
> >
> > Type regsvr32 /u symlcrst.dll then hit enter. Does that tell you that
> > the
> > command was successful? get module fail to load
> >
"Mick Murphy" <MickMurphy@discussions.microsoft.com> wrote in message
news:C8F65F08-7514-44C4-8998-C02EDB9FD3CA@microsoft.com...
> This is your second post about this.
>
> Jane C suggested a command prompt, and report back to her.
>
> You can't be bothered taking advice, so go away!!!
>
>
>
> "PAUL&GINA" wrote:
>
>> It all Started one morning, I had a fault on the software and it advised
>> me
>> reinstall the software compltly,i did notice some thing strange about
>> this
>> fault it said the antiphilsing was off.So I went about unistalling the
>> norton internet security by the removal tool i downloaded prevoiusly,i
>> deleted the synmantic live udate manger from the pc.Then i went about
>> reinstalling the software,it got as far as symLCSVC.EXE file ,then the
>> message appeared in the bottom right hand of the screen that a corrupted
>> and
>> unreadle file had occured that being symlcrst.dll.I thought nothing of it
>> ,the software was still loading.When it finished loading i got a message
>> that activating after i while the message dissappeared and box came up
>> saying there was a product fault and i had reinstal the programe so i
>> went
>> about it again and again and still the same fault came up.I them went
>> find
>> the file it is programe/commonfile/synmanticshared folder I tried to
>> delete
>> the folder but was unable,i got the code 0x80070570.I went into the
>> folder
>> deleted everything i could except for this dam dll file
>> Hope this helps
>> "Jane C" <janecolman@invalid.iinet.net.au> wrote in message
>> news:3E895D16-A617-43FF-902B-06E3ABAB165F@microsoft.com...
>> > Have you been trying to unregister it from an administrative command
>> > prompt?
>> >
>> > Type cmd in the start/search box, and when cmd.exe appears in the list
>> > above, right-click on it and select "Run as administrator"yes
>> >
>> > Type regsvr32 /u symlcrst.dll then hit enter. Does that tell you that
>> > the
>> > command was successful? get module fail to load
>> >
>> > Have you run the Norton removal tool from the Norton/Symantec
>> > website?yes
>> > What problems are you having that lead you to want to unregister this
>> > as
>> > above particular .dll?
>> >
>> > --
>> > Jane, not plain 64 bit enabled :-)
>> > Batteries not included. Braincell on vacation ;-)
>> > MVP Windows Shell/User
>> >
>> > "PAUL&GINA" <P_SKINNER@nobody.com> wrote in message
>> > news:eLhXsfQKIHA.748@TK2MSFTNGP04.phx.gbl...
>> >>I have tried to unregister the symlcrst.dll file in the command
>> >>prompt.All
>> >> i keep on getting the module could not be found and when i try to
>> >> delelte
>> >> this file i get the fault code 0x80070570
>> >> So i cannot unreg this file
>> >> I cannot delete this file in safe mode
>> >> Any help appreciated
>> >> Paul
>> >
>>
>>