Help! Dependency service or group failed to start

Hey sharkymatei

You're a steely eyed missle man.

Thanks as this simple reset worked...


--
one time use
------------------------------------------------------------------------
one time use's Profile: http://forums.techarena.in/members/136832.htm
View this thread: http://forums.techarena.in/vista-help/870516.htm

http://forums.techarena.in

one time use <one.time.use.3ys73c@DoNotSpam.com> wrote:

>
>Hey sharkymatei

"sharkymatei " posted what you replied to 10 months ago and has never
been seen since.

To Sharkymatei
Thank you so very much indeed for your help. YOU SAVED MY DAY

Have a niceday/night!


--
RHUL
------------------------------------------------------------------------
RHUL's Profile: http://forums.techarena.in/members/138779.htm
View this thread: http://forums.techarena.in/vista-help/870516.htm

http://forums.techarena.in

To Sharkymatei,

You really help us all! thanks!! love you so much!!!
hope to see you soon in future help. Thanks again!

Best Regards!


--
LucasTRstar
------------------------------------------------------------------------
LucasTRstar's Profile: http://forums.techarena.in/members/141843.htm
View this thread: http://forums.techarena.in/vista-help/870516.htm

http://forums.techarena.in

I had this exact problem. It started after I upgraded my Vista Business
laptop to SP1. I resolved it by re-installing but think my story might
help.

None of the adivce here or in other places on the web helped.

I setp 2 laptops. Both Dell. One is a D620 one is a E4300. Both have
4gig's or RAM.

THe D620 setup perfectly with no issues. It ran updates all the way to
SP2 with no issues is working great. It's about 2 years old.

The E4300 went fine until it got to SP1 which is when I started getting
the Red X over the network settings even though I was on internet and
VPN fine. I had issues trying to setup a modem with contact dll errors.
After a day of trying all the help in this thread and other places I
gave up and went to bed. In the middle of the night I realised the
difference!

The D620 had run the INITIAL Vista setup with the network cable plugged
in but the E4300 had run it without the cable plugged in.
The D620 had run through all the updates with downloads of up to 50mb.
The E4300 had run most of the updates with downloads of over 200mb.

I re-installed the E4300 from the inital install with the network
plugged in and it ran completely smoothly. It's 100% now. Patched all
the way to SP2.

So it's something to do with the initial install being able to get to
the internet for lastest drivers or patches or updates or something
DURING the install.

Hope it helps.


--
Waaib

sharkymatei;4111496 Wrote:
> hi everyone...I had the same problem and this seemed to work for me and
> a few computers :
>
> go to start menu and type cmd in the search bar and open cmd with
> administrator rights
>
> 1.type netsh winsock reset and hit enter....nevermind if it sais
> something about an error
> 2.type netsh int ip reset and hit enter....
> 3. restart you computer...and the error should be gone and the
> internet
> working
>
> what you just did was a TCP/IP stack repair


Hi and Thank you sharkymatei... i tried the " SFC SCANNOW" it didn't
work, but i tried your fix and hey presto I've a working laptop again!
Thanks again!


--
happybunny
------------------------------------------------------------------------
happybunny's Profile: http://forums.techarena.in/members/152461.htm
View this thread: http://forums.techarena.in/vista-help/870516.htm

http://forums.techarena.in

Solution:
I had the same issue and as it turns out a corrupt TCP/IP Stack

To fix, you will need to run a command prompt as administrator

Start > All Programs > Accessories > Command Prompt (Right-Click and
Run as Administrator)

At the command Prompt type: netsh winsock reset

Ignore all errors, restart your computer and networking should be
working.


--
rbatrack
------------------------------------------------------------------------
rbatrack's Profile: http://forums.techarena.in/members/155099.htm
View this thread: http://forums.techarena.in/vista-help/870516.htm

http://forums.techarena.in

I had the same issue and as it is a corrupt TCP/IP Stack

To fix, you will need to run a command prompt as administrator

Start > All Programs > Accessories > Command Prompt (Right-Click and
Run as Administrator)

At the command Prompt type : netsh winsock reset

Ignore all errors, restart your computer and networking should work


--
rbatrack