Chkdsk won't run

Hello,
I have gone thru all the options mentioned in this newsgroup about chkdsk
not running.
"chkdsk /f"
chkntfs /c c:
running chkdsk it in safe mode

all options lead me to running chkdsk on restart, but when restarted,
'chkdsk' never runs.


Below is the message I get when I try to run it. Hope someone can help me
find these errors.

C:\Windows\system32>chkdsk
The type of the file system is NTFS.
Volume label is SW_Preload.

WARNING! F parameter not specified.
Running CHKDSK in read-only mode.

CHKDSK is verifying files (stage 1 of 3)...
4 percent complete. (35541 of 76352 file records processed)
Attribute record (160, $I30) from file record segment 36429
is corrupt.
5 percent complete. (38176 of 76352 file records processed)
Attribute record (160, $I30) from file record segment 43012
is corrupt.
6 percent complete. (50812 of 76352 file records processed)
Attribute record (128, "") from file record segment 53402
is corrupt.
76352 file records processed.
File verification completed.
73 large file records processed.

Errors found. CHKDSK cannot continue in read-only mode.

Thanks.

Run it from the install disk. Go to the command prompt and use chkdsk /?
to find out the options. If I remember right, from the install cd the
options are /s and /p but I don't remember which is which. Obviously you
need to run the fix errors one. This version runs much longer than the
installed version, so be prepared.

"vistanewbie" <vistanewbie@discussions.microsoft.com> wrote in message
news:54F27DEB-2614-452F-B25B-1FD4A75390D7@microsoft.com...
> Hello,
> I have gone thru all the options mentioned in this newsgroup about chkdsk
> not running.
> "chkdsk /f"
> chkntfs /c c:
> running chkdsk it in safe mode
>
> all options lead me to running chkdsk on restart, but when restarted,
> 'chkdsk' never runs.
>
>
> Below is the message I get when I try to run it. Hope someone can help me
> find these errors.
>
> C:\Windows\system32>chkdsk
> The type of the file system is NTFS.
> Volume label is SW_Preload.
>
> WARNING! F parameter not specified.
> Running CHKDSK in read-only mode.
>
> CHKDSK is verifying files (stage 1 of 3)...
> 4 percent complete. (35541 of 76352 file records processed)
> Attribute record (160, $I30) from file record segment 36429
> is corrupt.
> 5 percent complete. (38176 of 76352 file records processed)
> Attribute record (160, $I30) from file record segment 43012
> is corrupt.
> 6 percent complete. (50812 of 76352 file records processed)
> Attribute record (128, "") from file record segment 53402
> is corrupt.
> 76352 file records processed.
> File verification completed.
> 73 large file records processed.
>
> Errors found. CHKDSK cannot continue in read-only mode.
>
> Thanks.

vistanewbie wrote:
> Hello,
> I have gone thru all the options mentioned in this newsgroup about
> chkdsk not running.
> "chkdsk /f"
> chkntfs /c c:
> running chkdsk it in safe mode
>
> all options lead me to running chkdsk on restart, but when restarted,
> 'chkdsk' never runs.
>
>
> Below is the message I get when I try to run it. Hope someone can
> help me find these errors.
>
> C:\Windows\system32>chkdsk
> The type of the file system is NTFS.
> Volume label is SW_Preload.
>
> WARNING! F parameter not specified.
> Running CHKDSK in read-only mode.
>
> CHKDSK is verifying files (stage 1 of 3)...
> 4 percent complete. (35541 of 76352 file records processed)
> Attribute record (160, $I30) from file record segment 36429
> is corrupt.
> 5 percent complete. (38176 of 76352 file records processed)
> Attribute record (160, $I30) from file record segment 43012
> is corrupt.
> 6 percent complete. (50812 of 76352 file records processed)
> Attribute record (128, "") from file record segment 53402
> is corrupt.
> 76352 file records processed.
> File verification completed.
> 73 large file records processed.
>
> Errors found. CHKDSK cannot continue in read-only mode.
>
> Thanks.
==================================
I stand to be corrected...but I'm thinking
the following article for WinXP would still
be valid for Vista. Maybe the command
you need is: chkdsk volume:/r

(315265) How to Perform Disk Error Checking
in Windows XP
http://support.microsoft.com/?kbid=315265
(check the two boxes..."Automatically fix file
system errors" and "Scan for and attempt
recovery of bad sectors") the utility will run
the next time you restart your computer.
(run error checking repeatedly until it finds
no errors)


--
John Inzer
MS Picture It! -
Digital Image MVP

Digital Image
Highlights and FAQs
http://tinyurl.com/aczzp

Notice
This is not tech support
I am a volunteer

Solutions that work for
me may not work for you

Proceed at your own risk

Just to clairify...replace "volume" with the
drive letter...example: chkdsk C:/r

--
John Inzer
MS Picture It! -
Digital Image MVP

Digital Image
Highlights and FAQs
http://tinyurl.com/aczzp

Notice
This is not tech support
I am a volunteer

Solutions that work for
me may not work for you

Proceed at your own risk
=================================
> vistanewbie wrote:
>> Hello,
>> I have gone thru all the options mentioned in this newsgroup about
>> chkdsk not running.
>> "chkdsk /f"
>> chkntfs /c c:
>> running chkdsk it in safe mode
>>
>> all options lead me to running chkdsk on restart, but when restarted,
>> 'chkdsk' never runs.
>>
>>
>> Below is the message I get when I try to run it. Hope someone can
>> help me find these errors.
>>
>> C:\Windows\system32>chkdsk
>> The type of the file system is NTFS.
>> Volume label is SW_Preload.
>>
>> WARNING! F parameter not specified.
>> Running CHKDSK in read-only mode.
>>
>> CHKDSK is verifying files (stage 1 of 3)...
>> 4 percent complete. (35541 of 76352 file records processed)
>> Attribute record (160, $I30) from file record segment 36429
>> is corrupt.
>> 5 percent complete. (38176 of 76352 file records processed)
>> Attribute record (160, $I30) from file record segment 43012
>> is corrupt.
>> 6 percent complete. (50812 of 76352 file records processed)
>> Attribute record (128, "") from file record segment 53402
>> is corrupt.
>> 76352 file records processed.
>> File verification completed.
>> 73 large file records processed.
>>
>> Errors found. CHKDSK cannot continue in read-only mode.
>>
>> Thanks.
> ==================================
> I stand to be corrected...but I'm thinking
> the following article for WinXP would still
> be valid for Vista. Maybe the command
> you need is: chkdsk volume:/r
>
> (315265) How to Perform Disk Error Checking
> in Windows XP
> http://support.microsoft.com/?kbid=315265
> (check the two boxes..."Automatically fix file
> system errors" and "Scan for and attempt
> recovery of bad sectors") the utility will run
> the next time you restart your computer.
> (run error checking repeatedly until it finds
> no errors)

John

Would right clicking the Command Prompt option and selecting "Run as
Administrator" make a difference?

--


Regards.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

"John Inzer" <oobie@doobie.xyz> wrote in message
news:eSFyaw3fHHA.3372@TK2MSFTNGP04.phx.gbl...
> Just to clairify...replace "volume" with the
> drive letter...example: chkdsk C:/r
>
> --
> John Inzer
> MS Picture It! -
> Digital Image MVP
>
> Digital Image
> Highlights and FAQs
> http://tinyurl.com/aczzp
>
> Notice
> This is not tech support
> I am a volunteer
>
> Solutions that work for
> me may not work for you
>
> Proceed at your own risk
> =================================
>> vistanewbie wrote:
>>> Hello,
>>> I have gone thru all the options mentioned in this newsgroup
>>> about
>>> chkdsk not running.
>>> "chkdsk /f"
>>> chkntfs /c c:
>>> running chkdsk it in safe mode
>>>
>>> all options lead me to running chkdsk on restart, but when
>>> restarted,
>>> 'chkdsk' never runs.
>>>
>>>
>>> Below is the message I get when I try to run it. Hope someone
>>> can
>>> help me find these errors.
>>>
>>> C:\Windows\system32>chkdsk
>>> The type of the file system is NTFS.
>>> Volume label is SW_Preload.
>>>
>>> WARNING! F parameter not specified.
>>> Running CHKDSK in read-only mode.
>>>
>>> CHKDSK is verifying files (stage 1 of 3)...
>>> 4 percent complete. (35541 of 76352 file records processed)
>>> Attribute record (160, $I30) from file record segment 36429
>>> is corrupt.
>>> 5 percent complete. (38176 of 76352 file records processed)
>>> Attribute record (160, $I30) from file record segment 43012
>>> is corrupt.
>>> 6 percent complete. (50812 of 76352 file records processed)
>>> Attribute record (128, "") from file record segment 53402
>>> is corrupt.
>>> 76352 file records processed.
>>> File verification completed.
>>> 73 large file records processed.
>>>
>>> Errors found. CHKDSK cannot continue in read-only mode.
>>>
>>> Thanks.
>> ==================================
>> I stand to be corrected...but I'm thinking
>> the following article for WinXP would still
>> be valid for Vista. Maybe the command
>> you need is: chkdsk volume:/r
>>
>> (315265) How to Perform Disk Error Checking
>> in Windows XP
>> http://support.microsoft.com/?kbid=315265
>> (check the two boxes..."Automatically fix file
>> system errors" and "Scan for and attempt
>> recovery of bad sectors") the utility will run
>> the next time you restart your computer.
>> (run error checking repeatedly until it finds
>> no errors)
>
>
>

"vistanewbie" <vistanewbie@discussions.microsoft.com> wrote in message
news:54F27DEB-2614-452F-B25B-1FD4A75390D7@microsoft.com...
> Hello,
> I have gone thru all the options mentioned in this newsgroup about chkdsk
> not running.
> "chkdsk /f"
> chkntfs /c c:
> running chkdsk it in safe mode
>
> all options lead me to running chkdsk on restart, but when restarted,
> 'chkdsk' never runs.
>
>
> Below is the message I get when I try to run it. Hope someone can help me
> find these errors.
>
> C:\Windows\system32>chkdsk
> The type of the file system is NTFS.
> Volume label is SW_Preload.
>
> WARNING! F parameter not specified.
> Running CHKDSK in read-only mode.
>
> CHKDSK is verifying files (stage 1 of 3)...
> 4 percent complete. (35541 of 76352 file records processed)
> Attribute record (160, $I30) from file record segment 36429
> is corrupt.
> 5 percent complete. (38176 of 76352 file records processed)
> Attribute record (160, $I30) from file record segment 43012
> is corrupt.
> 6 percent complete. (50812 of 76352 file records processed)
> Attribute record (128, "") from file record segment 53402
> is corrupt.
> 76352 file records processed.
> File verification completed.
> 73 large file records processed.
>
> Errors found. CHKDSK cannot continue in read-only mode.
>
> Thanks.

If you only have the one HD, then no need to specify the volume (C

Use the following at the command prompt

CHKDSK /R /F

Note space after K and space after R

This will take some hours to run on a large drive as it checks the whole
drive for errors

Frenchy

Thanks John. I had to re-install the OS, that took care of the error I
mentioned.

"John Barnes" wrote:

> Run it from the install disk. Go to the command prompt and use chkdsk /?
> to find out the options. If I remember right, from the install cd the
> options are /s and /p but I don't remember which is which. Obviously you
> need to run the fix errors one. This version runs much longer than the
> installed version, so be prepared.
>
> "vistanewbie" <vistanewbie@discussions.microsoft.com> wrote in message
> news:54F27DEB-2614-452F-B25B-1FD4A75390D7@microsoft.com...
> > Hello,
> > I have gone thru all the options mentioned in this newsgroup about chkdsk
> > not running.
> > "chkdsk /f"
> > chkntfs /c c:
> > running chkdsk it in safe mode
> >
> > all options lead me to running chkdsk on restart, but when restarted,
> > 'chkdsk' never runs.
> >
> >
> > Below is the message I get when I try to run it. Hope someone can help me
> > find these errors.
> >
> > C:\Windows\system32>chkdsk
> > The type of the file system is NTFS.
> > Volume label is SW_Preload.
> >
> > WARNING! F parameter not specified.
> > Running CHKDSK in read-only mode.
> >
> > CHKDSK is verifying files (stage 1 of 3)...
> > 4 percent complete. (35541 of 76352 file records processed)
> > Attribute record (160, $I30) from file record segment 36429
> > is corrupt.
> > 5 percent complete. (38176 of 76352 file records processed)
> > Attribute record (160, $I30) from file record segment 43012
> > is corrupt.
> > 6 percent complete. (50812 of 76352 file records processed)
> > Attribute record (128, "") from file record segment 53402
> > is corrupt.
> > 76352 file records processed.
> > File verification completed.
> > 73 large file records processed.
> >
> > Errors found. CHKDSK cannot continue in read-only mode.
> >
> > Thanks.
>
>

Sure is the safest way to go. I hope you have made sure you don't have a
hard drive that is failing. That is very often the reason for this problem
on Vista.

"vistanewbie" <vistanewbie@discussions.microsoft.com> wrote in message
news:2882BAA2-6795-4E47-85A3-3E2197B6CFB5@microsoft.com...
> Thanks John. I had to re-install the OS, that took care of the error I
> mentioned.
>
> "John Barnes" wrote:
>
>> Run it from the install disk. Go to the command prompt and use chkdsk /?
>> to find out the options. If I remember right, from the install cd the
>> options are /s and /p but I don't remember which is which. Obviously you
>> need to run the fix errors one. This version runs much longer than the
>> installed version, so be prepared.
>>
>> "vistanewbie" <vistanewbie@discussions.microsoft.com> wrote in message
>> news:54F27DEB-2614-452F-B25B-1FD4A75390D7@microsoft.com...
>> > Hello,
>> > I have gone thru all the options mentioned in this newsgroup about
>> > chkdsk
>> > not running.
>> > "chkdsk /f"
>> > chkntfs /c c:
>> > running chkdsk it in safe mode
>> >
>> > all options lead me to running chkdsk on restart, but when restarted,
>> > 'chkdsk' never runs.
>> >
>> >
>> > Below is the message I get when I try to run it. Hope someone can help
>> > me
>> > find these errors.
>> >
>> > C:\Windows\system32>chkdsk
>> > The type of the file system is NTFS.
>> > Volume label is SW_Preload.
>> >
>> > WARNING! F parameter not specified.
>> > Running CHKDSK in read-only mode.
>> >
>> > CHKDSK is verifying files (stage 1 of 3)...
>> > 4 percent complete. (35541 of 76352 file records processed)
>> > Attribute record (160, $I30) from file record segment 36429
>> > is corrupt.
>> > 5 percent complete. (38176 of 76352 file records processed)
>> > Attribute record (160, $I30) from file record segment 43012
>> > is corrupt.
>> > 6 percent complete. (50812 of 76352 file records processed)
>> > Attribute record (128, "") from file record segment 53402
>> > is corrupt.
>> > 76352 file records processed.
>> > File verification completed.
>> > 73 large file records processed.
>> >
>> > Errors found. CHKDSK cannot continue in read-only mode.
>> >
>> > Thanks.
>>
>>