Windows Easy Transfer can't transfer from Vista-64bit?

I tried out Vista Ultimate 64bit for a month and got whipped by driver
issues. I installed Vista Ultimate 32bit on a 2nd partition and tried using
Windows Easy Transfer to transfer files and settings from the 64bit
installation and pick them up in the 32bit installaion. This is the error I
get every time I try to complete the transfer: "The store you selected was
saved on a 64bit machine. Windows Easy Transfer cannot apply the data."

Is there a way to use WET to transfer files from a Vista-64bit installation?

If not WET, is there another utility?

Hi,

Are you running the tool from within the 64-bit installation? You can't run
it from another installation and simply point to the target install, you
must be booted into the installation you want to save the files and settings
from.

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP
http://mvp.support.microsoft.com/
Windows help - www.rickrogers.org
My thoughts http://rick-mvp.blogspot.com

"RJ" <RJ@discussions.microsoft.com> wrote in message
news:162DE1BB-7763-444E-8574-59EBE3B68129@microsoft.com...
>I tried out Vista Ultimate 64bit for a month and got whipped by driver
> issues. I installed Vista Ultimate 32bit on a 2nd partition and tried
> using
> Windows Easy Transfer to transfer files and settings from the 64bit
> installation and pick them up in the 32bit installaion. This is the error
> I
> get every time I try to complete the transfer: "The store you selected was
> saved on a 64bit machine. Windows Easy Transfer cannot apply the data."
>
> Is there a way to use WET to transfer files from a Vista-64bit
> installation?
>
> If not WET, is there another utility?

64 to 32 is the one way that is not supported. Sorry. All the other
possibilities work, of course.

"RJ" <RJ@discussions.microsoft.com> wrote in message
news:162DE1BB-7763-444E-8574-59EBE3B68129@microsoft.com...
>I tried out Vista Ultimate 64bit for a month and got whipped by driver
> issues. I installed Vista Ultimate 32bit on a 2nd partition and tried
> using
> Windows Easy Transfer to transfer files and settings from the 64bit
> installation and pick them up in the 32bit installaion. This is the error
> I
> get every time I try to complete the transfer: "The store you selected was
> saved on a 64bit machine. Windows Easy Transfer cannot apply the data."
>
> Is there a way to use WET to transfer files from a Vista-64bit
> installation?
>
> If not WET, is there another utility?

Rick,

Yes, I ran WET from inside the 64bit installation, created the source files
for the restore into the 32Bit installation and exited the 64bit
installation.

Looks like Colin may have my answer I "wasn't" looking for after your post.

Now that we know the 64 to 32 bit WET transfer is not supported (MS only
knows why...) does anybody know if there is a utility out there that supports
what MS does not? Free preferably but I'm open to some options before I pull
th plug and do it manually.

Thank you for the post Rick!

RJ

"Rick Rogers" wrote:

> Hi,
>
> Are you running the tool from within the 64-bit installation? You can't run
> it from another installation and simply point to the target install, you
> must be booted into the installation you want to save the files and settings
> from.
>
> --
> Best of Luck,
>
> Rick Rogers, aka "Nutcase" - Microsoft MVP
> http://mvp.support.microsoft.com/
> Windows help - www.rickrogers.org
> My thoughts http://rick-mvp.blogspot.com
>
> "RJ" <RJ@discussions.microsoft.com> wrote in message
> news:162DE1BB-7763-444E-8574-59EBE3B68129@microsoft.com...
> >I tried out Vista Ultimate 64bit for a month and got whipped by driver
> > issues. I installed Vista Ultimate 32bit on a 2nd partition and tried
> > using
> > Windows Easy Transfer to transfer files and settings from the 64bit
> > installation and pick them up in the 32bit installaion. This is the error
> > I
> > get every time I try to complete the transfer: "The store you selected was
> > saved on a 64bit machine. Windows Easy Transfer cannot apply the data."
> >
> > Is there a way to use WET to transfer files from a Vista-64bit
> > installation?
> >
> > If not WET, is there another utility?
>
>

Looks like you have the answer I "wasn't" looking for.

Now that I know the 64 to 32 bit WET transfer is not supported (MS only
knows why...) do you have any recommendations for a utility out there that
might support this? Free preferably but I'm open to options before I pull the
plug and do it manually.

Thank you for the post Colin!

RJ


"Colin Barnhorst" wrote:

> 64 to 32 is the one way that is not supported. Sorry. All the other
> possibilities work, of course.
>
> "RJ" <RJ@discussions.microsoft.com> wrote in message
> news:162DE1BB-7763-444E-8574-59EBE3B68129@microsoft.com...
> >I tried out Vista Ultimate 64bit for a month and got whipped by driver
> > issues. I installed Vista Ultimate 32bit on a 2nd partition and tried
> > using
> > Windows Easy Transfer to transfer files and settings from the 64bit
> > installation and pick them up in the 32bit installaion. This is the error
> > I
> > get every time I try to complete the transfer: "The store you selected was
> > saved on a 64bit machine. Windows Easy Transfer cannot apply the data."
> >
> > Is there a way to use WET to transfer files from a Vista-64bit
> > installation?
> >
> > If not WET, is there another utility?
>

You're welcome. Why don't you ask in the
microsoft.public.windows.64bit.general newsgroup. I believe some folks who
hang out there know about some third party programs that can do what you
want.

"RJ" <RJ@discussions.microsoft.com> wrote in message
news:497EAD94-22FD-4A6E-9188-8AB3E24D0A26@microsoft.com...
> Looks like you have the answer I "wasn't" looking for.
>
> Now that I know the 64 to 32 bit WET transfer is not supported (MS only
> knows why...) do you have any recommendations for a utility out there that
> might support this? Free preferably but I'm open to options before I pull
> the
> plug and do it manually.
>
> Thank you for the post Colin!
>
> RJ
>
>
> "Colin Barnhorst" wrote:
>
>> 64 to 32 is the one way that is not supported. Sorry. All the other
>> possibilities work, of course.
>>
>> "RJ" <RJ@discussions.microsoft.com> wrote in message
>> news:162DE1BB-7763-444E-8574-59EBE3B68129@microsoft.com...
>> >I tried out Vista Ultimate 64bit for a month and got whipped by driver
>> > issues. I installed Vista Ultimate 32bit on a 2nd partition and tried
>> > using
>> > Windows Easy Transfer to transfer files and settings from the 64bit
>> > installation and pick them up in the 32bit installaion. This is the
>> > error
>> > I
>> > get every time I try to complete the transfer: "The store you selected
>> > was
>> > saved on a 64bit machine. Windows Easy Transfer cannot apply the data."
>> >
>> > Is there a way to use WET to transfer files from a Vista-64bit
>> > installation?
>> >
>> > If not WET, is there another utility?
>>

I'll give that a try. Thanks for the referral!

"Colin Barnhorst" wrote:

> You're welcome. Why don't you ask in the
> microsoft.public.windows.64bit.general newsgroup. I believe some folks who
> hang out there know about some third party programs that can do what you
> want.
>
> "RJ" <RJ@discussions.microsoft.com> wrote in message
> news:497EAD94-22FD-4A6E-9188-8AB3E24D0A26@microsoft.com...
> > Looks like you have the answer I "wasn't" looking for.
> >
> > Now that I know the 64 to 32 bit WET transfer is not supported (MS only
> > knows why...) do you have any recommendations for a utility out there that
> > might support this? Free preferably but I'm open to options before I pull
> > the
> > plug and do it manually.
> >
> > Thank you for the post Colin!
> >
> > RJ
> >
> >
> > "Colin Barnhorst" wrote:
> >
> >> 64 to 32 is the one way that is not supported. Sorry. All the other
> >> possibilities work, of course.
> >>
> >> "RJ" <RJ@discussions.microsoft.com> wrote in message
> >> news:162DE1BB-7763-444E-8574-59EBE3B68129@microsoft.com...
> >> >I tried out Vista Ultimate 64bit for a month and got whipped by driver
> >> > issues. I installed Vista Ultimate 32bit on a 2nd partition and tried
> >> > using
> >> > Windows Easy Transfer to transfer files and settings from the 64bit
> >> > installation and pick them up in the 32bit installaion. This is the
> >> > error
> >> > I
> >> > get every time I try to complete the transfer: "The store you selected
> >> > was
> >> > saved on a 64bit machine. Windows Easy Transfer cannot apply the data."
> >> >
> >> > Is there a way to use WET to transfer files from a Vista-64bit
> >> > installation?
> >> >
> >> > If not WET, is there another utility?
> >>
>