HTFC Forums

H.T.F.C.

How To Fix Computers





Go Back   HTFC Forums > Software Newsgroups > Windows Vista > Windows Vista Installation

Register FAQ Members List Calendar Search Today's Posts Mark Forums Read
  #1  
Old 04-22-2008, 12:07 PM
Maurice
 
Posts: n/a
Default Vista Ultimate Install Failure

This is a machine that had XP Pro installed with no issues. Specs are a 1.8
Ghz processor with 2Gb memory. The install made it to the Vista desktop [but
no icons] but the install restart began a chain of failures. There have been
a chain of bluescreens and error messages. One bluescreen message was
"IRQL_NOT_LESS_OR_EQUAL". There were other references to hardware and video.
I switched to the video connection that came with the board but the same
error messages persist. Safe mode leads to the same outcome. Seeking
guidance in troubleshooting.
Reply With Quote
Sponsored Links
  #2  
Old 04-23-2008, 04:43 AM
Chuck
 
Posts: n/a
Default Re: Vista Ultimate Install Failure

You really didn't give much to go on--
Irq not less or equal is an error message that can be caused by hardware
failure, Obsolete/incorrect Drivers, overclocking, etc.
In your case, I'd start at the MBD level, and see if an updated BIOS and
possibly chipset and USB drivers are needed/available.
Then, I'd likely move on and see if the video driver needs updating.
Finally, the other device drivers for printers, LAN cards, etc.
The Lan card drivers are also a commonly found source of your problems.

You might be able to get a successful install by removing non essential
devices & I/O cards/adapters, leaving the keyboard mouse, video card,
hard drive, and CD/DVD drive. Then things are added in one at a time until
everything works, or the last installed device causes the problem.

"Maurice" <Maurice@discussions.microsoft.com> wrote in message
news:A6F1B873-1334-4573-9A17-7CCACCF3BF35@microsoft.com...
> This is a machine that had XP Pro installed with no issues. Specs are a

1.8
> Ghz processor with 2Gb memory. The install made it to the Vista desktop

[but
> no icons] but the install restart began a chain of failures. There have

been
> a chain of bluescreens and error messages. One bluescreen message was
> "IRQL_NOT_LESS_OR_EQUAL". There were other references to hardware and

video.
> I switched to the video connection that came with the board but the same
> error messages persist. Safe mode leads to the same outcome. Seeking
> guidance in troubleshooting.



Reply With Quote
Sponsored Links
Reply


Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Vista home premium to Vista Ultimate (upgrade) failure Edit Distance Windows Vista Installation 12 03-13-2008 11:58 PM
vista ultimate backup failure - shadow copy failure Dave Shrader Windows Vista 4 03-10-2008 12:56 PM
upgrade from vista business to ultimate failure t_o_b Windows Vista Installation 1 12-30-2007 01:48 PM
Vista Install Failure Ex-COC Windows Vista 1 12-15-2007 03:14 PM
vista ultimate backup failure - shadow copy failure Dave Shrader Windows Vista 3 07-23-2007 07:54 AM


All times are GMT. The time now is 01:49 AM.


Powered by vBulletin® Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.1.0
© 2004 - 2007 Web-S-Sense Pty. Ltd. Usenet and forums posts © their respective authors.
Ad Management by RedTyger