Vista setup does not recognize my SATA drives

Dear all,

I believe I have tried all possible drivers for my SATA drives in
order for Vista setup to recognize my HDDs. I have not yet succeeded.
Here is my config:

Motherboard: GA-K8N Ultra-9 with Si3114 RAID controller
HDD: 2 HDDs with multiple NTFS partitions. Configured as JBOD in the
Si3114 raid controller. WinXP installed on C: partition.
Processor: AMD64 X2 4400+
Vista Edition: Enterprise

Can anybpdy give me some clear step by step instructions on how to get
this to work ? I never had that much trouble trying to install a new
OS before !

Thanks,

Nick,

Suggestions:
visit the Gigabyte website and look for Vista drivers
or here:
http://www.siliconimage.com/support/...tid=2&osid=10&

the drivers will need to be expanded and then installed during the Vista
Installation process by means of the F6 key.
peter
"Nick" <nhinze@gmail.com> wrote in message
news:1178740002.123638.176450@q75g2000hsh.googlegr oups.com...
> Dear all,
>
> I believe I have tried all possible drivers for my SATA drives in
> order for Vista setup to recognize my HDDs. I have not yet succeeded.
> Here is my config:
>
> Motherboard: GA-K8N Ultra-9 with Si3114 RAID controller
> HDD: 2 HDDs with multiple NTFS partitions. Configured as JBOD in the
> Si3114 raid controller. WinXP installed on C: partition.
> Processor: AMD64 X2 4400+
> Vista Edition: Enterprise
>
> Can anybpdy give me some clear step by step instructions on how to get
> this to work ? I never had that much trouble trying to install a new
> OS before !
>
> Thanks,
>
> Nick,
>