I've got a silly question here. Its not really a problem, but I like my PC's
to be set up the way I like it, and anything that changes it annoys me.
I have 3 physical IDE disks on my PC.
I've just formatted the C drive on of the IDE drives, on one of my PC's and
re-installed everything, as it was time for a clean-up. To do this I
disconnected two IDE drives leaving me with an IDE HDD & a CD drive as the
slave. The Bios found them as Primary Master and Primary slave as expected.
Windows Disk Management COnsole showed my C Drive as Disk 0 again as expected.
When all was working fine, I added the other HDD's as Secondary Master &
slave. Again the Bios showed them correctly.
..However Windows Disk Management had changed my original Disk 0 to Disk 2
Any ideas why this happens or what I can do to prevent it. As I said its no
big deal and it doesn't cause real issues but for eg when testing disks I
like my C drive to be disk 0 to reduce the chance of an error in formatting
the wrong disk.
One thing; you are slowing down your computer by having your main HD and CD
drive on the same IDE cable
--
Mick Murphy - Qld - Australia
"ColMac" wrote:
> I've got a silly question here. Its not really a problem, but I like my PC's
> to be set up the way I like it, and anything that changes it annoys me.
>
> I have 3 physical IDE disks on my PC.
>
> I've just formatted the C drive on of the IDE drives, on one of my PC's and
> re-installed everything, as it was time for a clean-up. To do this I
> disconnected two IDE drives leaving me with an IDE HDD & a CD drive as the
> slave. The Bios found them as Primary Master and Primary slave as expected.
> Windows Disk Management COnsole showed my C Drive as Disk 0 again as expected.
>
> When all was working fine, I added the other HDD's as Secondary Master &
> slave. Again the Bios showed them correctly.
> .However Windows Disk Management had changed my original Disk 0 to Disk 2
>
> Any ideas why this happens or what I can do to prevent it. As I said its no
> big deal and it doesn't cause real issues but for eg when testing disks I
> like my C drive to be disk 0 to reduce the chance of an error in formatting
> the wrong disk.
>
> Ta
>
>
> One thing; you are slowing down your computer by having your main HD and CD
> drive on the same IDE cable
>
> --
> Mick Murphy - Qld - Australia
>
>
> "ColMac" wrote:
>
> > I've got a silly question here. Its not really a problem, but I like my PC's
> > to be set up the way I like it, and anything that changes it annoys me.
> >
> > I have 3 physical IDE disks on my PC.
> >
> > I've just formatted the C drive on of the IDE drives, on one of my PC's and
> > re-installed everything, as it was time for a clean-up. To do this I
> > disconnected two IDE drives leaving me with an IDE HDD & a CD drive as the
> > slave. The Bios found them as Primary Master and Primary slave as expected.
> > Windows Disk Management COnsole showed my C Drive as Disk 0 again as expected.
> >
> > When all was working fine, I added the other HDD's as Secondary Master &
> > slave. Again the Bios showed them correctly.
> > .However Windows Disk Management had changed my original Disk 0 to Disk 2
> >
> > Any ideas why this happens or what I can do to prevent it. As I said its no
> > big deal and it doesn't cause real issues but for eg when testing disks I
> > like my C drive to be disk 0 to reduce the chance of an error in formatting
> > the wrong disk.
> >
> > Ta
> >
> >
Have you tried switching the two IDE cable connections on the MOBO since is
for IDE channel and the other for IDE channel 2?
"ColMac" <ColMac@discussions.microsoft.com> wrote in message
news:CE840501-DBB9-4454-99EB-8CD0F7A6B0ED@microsoft.com...
> Don't have a lot of choice with 4 ide drives tho
>
> "Mick Murphy" wrote:
>
>> One thing; you are slowing down your computer by having your main HD and
>> CD
>> drive on the same IDE cable
>>
>> --
>> Mick Murphy - Qld - Australia
>>
>>
>> "ColMac" wrote:
>>
>> > I've got a silly question here. Its not really a problem, but I like my
>> > PC's
>> > to be set up the way I like it, and anything that changes it annoys me.
>> >
>> > I have 3 physical IDE disks on my PC.
>> >
>> > I've just formatted the C drive on of the IDE drives, on one of my PC's
>> > and
>> > re-installed everything, as it was time for a clean-up. To do this I
>> > disconnected two IDE drives leaving me with an IDE HDD & a CD drive as
>> > the
>> > slave. The Bios found them as Primary Master and Primary slave as
>> > expected.
>> > Windows Disk Management COnsole showed my C Drive as Disk 0 again as
>> > expected.
>> >
>> > When all was working fine, I added the other HDD's as Secondary Master
>> > &
>> > slave. Again the Bios showed them correctly.
>> > .However Windows Disk Management had changed my original Disk 0 to Disk
>> > 2
>> >
>> > Any ideas why this happens or what I can do to prevent it. As I said
>> > its no
>> > big deal and it doesn't cause real issues but for eg when testing disks
>> > I
>> > like my C drive to be disk 0 to reduce the chance of an error in
>> > formatting
>> > the wrong disk.
>> >
>> > Ta
>> >
>> >
Yes I did try that as well. Made no difference. So it cannot be a random
allocation of disk nos. It must be pre-ordained as my C drives ends up as
drive 2 whatever way it is connected. As I said initially, I even started
with only 1 HDD, and then added the other ones. my C drive went from being
disk 0 to disk 2
Colin
"Curious" wrote:
> Have you tried switching the two IDE cable connections on the MOBO since is
> for IDE channel and the other for IDE channel 2?
> "ColMac" <ColMac@discussions.microsoft.com> wrote in message
> news:CE840501-DBB9-4454-99EB-8CD0F7A6B0ED@microsoft.com...
> > Don't have a lot of choice with 4 ide drives tho
> >
> > "Mick Murphy" wrote:
> >
> >> One thing; you are slowing down your computer by having your main HD and
> >> CD
> >> drive on the same IDE cable
> >>
> >> --
> >> Mick Murphy - Qld - Australia
> >>
> >>
> >> "ColMac" wrote:
> >>
> >> > I've got a silly question here. Its not really a problem, but I like my
> >> > PC's
> >> > to be set up the way I like it, and anything that changes it annoys me.
> >> >
> >> > I have 3 physical IDE disks on my PC.
> >> >
> >> > I've just formatted the C drive on of the IDE drives, on one of my PC's
> >> > and
> >> > re-installed everything, as it was time for a clean-up. To do this I
> >> > disconnected two IDE drives leaving me with an IDE HDD & a CD drive as
> >> > the
> >> > slave. The Bios found them as Primary Master and Primary slave as
> >> > expected.
> >> > Windows Disk Management COnsole showed my C Drive as Disk 0 again as
> >> > expected.
> >> >
> >> > When all was working fine, I added the other HDD's as Secondary Master
> >> > &
> >> > slave. Again the Bios showed them correctly.
> >> > .However Windows Disk Management had changed my original Disk 0 to Disk
> >> > 2
> >> >
> >> > Any ideas why this happens or what I can do to prevent it. As I said
> >> > its no
> >> > big deal and it doesn't cause real issues but for eg when testing disks
> >> > I
> >> > like my C drive to be disk 0 to reduce the chance of an error in
> >> > formatting
> >> > the wrong disk.
> >> >
> >> > Ta
> >> >
> >> >
>
I assume you are using the other 2 IDE HD as storage.
Why don't you have a Master(operating system) and Slave(Storage) HD on main
IDE channel, and the CD/DVD + the other HD(storage) on the other IDE channel?
Or scrap the second HD on CD IDE channel, and go USB External HD
Just a thought to speed things up a bit!
--
Mick Murphy - Qld - Australia
"ColMac" wrote:
> Don't have a lot of choice with 4 ide drives tho
>
> "Mick Murphy" wrote:
>
> > One thing; you are slowing down your computer by having your main HD and CD
> > drive on the same IDE cable
> >
> > --
> > Mick Murphy - Qld - Australia
> >
> >
> > "ColMac" wrote:
> >
> > > I've got a silly question here. Its not really a problem, but I like my PC's
> > > to be set up the way I like it, and anything that changes it annoys me.
> > >
> > > I have 3 physical IDE disks on my PC.
> > >
> > > I've just formatted the C drive on of the IDE drives, on one of my PC's and
> > > re-installed everything, as it was time for a clean-up. To do this I
> > > disconnected two IDE drives leaving me with an IDE HDD & a CD drive as the
> > > slave. The Bios found them as Primary Master and Primary slave as expected.
> > > Windows Disk Management COnsole showed my C Drive as Disk 0 again as expected.
> > >
> > > When all was working fine, I added the other HDD's as Secondary Master &
> > > slave. Again the Bios showed them correctly.
> > > .However Windows Disk Management had changed my original Disk 0 to Disk 2
> > >
> > > Any ideas why this happens or what I can do to prevent it. As I said its no
> > > big deal and it doesn't cause real issues but for eg when testing disks I
> > > like my C drive to be disk 0 to reduce the chance of an error in formatting
> > > the wrong disk.
> > >
> > > Ta
> > >
> > >
Check the settings for your drives and priorities in the BIOS and make sure
that the drives jumpers match the position they are on on the IDE cable
(master/slave/cs)
"ColMac" <ColMac@discussions.microsoft.com> wrote in message
news:903432A4-35EC-40BE-9883-8A37CE140CFF@microsoft.com...
> Yes I did try that as well. Made no difference. So it cannot be a random
> allocation of disk nos. It must be pre-ordained as my C drives ends up as
> drive 2 whatever way it is connected. As I said initially, I even started
> with only 1 HDD, and then added the other ones. my C drive went from being
> disk 0 to disk 2
>
>
> Colin
>
> "Curious" wrote:
>
>> Have you tried switching the two IDE cable connections on the MOBO since
>> is
>> for IDE channel and the other for IDE channel 2?
>> "ColMac" <ColMac@discussions.microsoft.com> wrote in message
>> news:CE840501-DBB9-4454-99EB-8CD0F7A6B0ED@microsoft.com...
>> > Don't have a lot of choice with 4 ide drives tho
>> >
>> > "Mick Murphy" wrote:
>> >
>> >> One thing; you are slowing down your computer by having your main HD
>> >> and
>> >> CD
>> >> drive on the same IDE cable
>> >>
>> >> --
>> >> Mick Murphy - Qld - Australia
>> >>
>> >>
>> >> "ColMac" wrote:
>> >>
>> >> > I've got a silly question here. Its not really a problem, but I like
>> >> > my
>> >> > PC's
>> >> > to be set up the way I like it, and anything that changes it annoys
>> >> > me.
>> >> >
>> >> > I have 3 physical IDE disks on my PC.
>> >> >
>> >> > I've just formatted the C drive on of the IDE drives, on one of my
>> >> > PC's
>> >> > and
>> >> > re-installed everything, as it was time for a clean-up. To do this I
>> >> > disconnected two IDE drives leaving me with an IDE HDD & a CD drive
>> >> > as
>> >> > the
>> >> > slave. The Bios found them as Primary Master and Primary slave as
>> >> > expected.
>> >> > Windows Disk Management COnsole showed my C Drive as Disk 0 again as
>> >> > expected.
>> >> >
>> >> > When all was working fine, I added the other HDD's as Secondary
>> >> > Master
>> >> > &
>> >> > slave. Again the Bios showed them correctly.
>> >> > .However Windows Disk Management had changed my original Disk 0 to
>> >> > Disk
>> >> > 2
>> >> >
>> >> > Any ideas why this happens or what I can do to prevent it. As I said
>> >> > its no
>> >> > big deal and it doesn't cause real issues but for eg when testing
>> >> > disks
>> >> > I
>> >> > like my C drive to be disk 0 to reduce the chance of an error in
>> >> > formatting
>> >> > the wrong disk.
>> >> >
>> >> > Ta
>> >> >
>> >> >
>>
I'll check that when I get home. I'm fairly sure they are set correctly tho
"John Barnes" wrote:
> Check the settings for your drives and priorities in the BIOS and make sure
> that the drives jumpers match the position they are on on the IDE cable
> (master/slave/cs)
>
> "ColMac" <ColMac@discussions.microsoft.com> wrote in message
> news:903432A4-35EC-40BE-9883-8A37CE140CFF@microsoft.com...
> > Yes I did try that as well. Made no difference. So it cannot be a random
> > allocation of disk nos. It must be pre-ordained as my C drives ends up as
> > drive 2 whatever way it is connected. As I said initially, I even started
> > with only 1 HDD, and then added the other ones. my C drive went from being
> > disk 0 to disk 2
> >
> >
> > Colin
> >
> > "Curious" wrote:
> >
> >> Have you tried switching the two IDE cable connections on the MOBO since
> >> is
> >> for IDE channel and the other for IDE channel 2?
> >> "ColMac" <ColMac@discussions.microsoft.com> wrote in message
> >> news:CE840501-DBB9-4454-99EB-8CD0F7A6B0ED@microsoft.com...
> >> > Don't have a lot of choice with 4 ide drives tho
> >> >
> >> > "Mick Murphy" wrote:
> >> >
> >> >> One thing; you are slowing down your computer by having your main HD
> >> >> and
> >> >> CD
> >> >> drive on the same IDE cable
> >> >>
> >> >> --
> >> >> Mick Murphy - Qld - Australia
> >> >>
> >> >>
> >> >> "ColMac" wrote:
> >> >>
> >> >> > I've got a silly question here. Its not really a problem, but I like
> >> >> > my
> >> >> > PC's
> >> >> > to be set up the way I like it, and anything that changes it annoys
> >> >> > me.
> >> >> >
> >> >> > I have 3 physical IDE disks on my PC.
> >> >> >
> >> >> > I've just formatted the C drive on of the IDE drives, on one of my
> >> >> > PC's
> >> >> > and
> >> >> > re-installed everything, as it was time for a clean-up. To do this I
> >> >> > disconnected two IDE drives leaving me with an IDE HDD & a CD drive
> >> >> > as
> >> >> > the
> >> >> > slave. The Bios found them as Primary Master and Primary slave as
> >> >> > expected.
> >> >> > Windows Disk Management COnsole showed my C Drive as Disk 0 again as
> >> >> > expected.
> >> >> >
> >> >> > When all was working fine, I added the other HDD's as Secondary
> >> >> > Master
> >> >> > &
> >> >> > slave. Again the Bios showed them correctly.
> >> >> > .However Windows Disk Management had changed my original Disk 0 to
> >> >> > Disk
> >> >> > 2
> >> >> >
> >> >> > Any ideas why this happens or what I can do to prevent it. As I said
> >> >> > its no
> >> >> > big deal and it doesn't cause real issues but for eg when testing
> >> >> > disks
> >> >> > I
> >> >> > like my C drive to be disk 0 to reduce the chance of an error in
> >> >> > formatting
> >> >> > the wrong disk.
> >> >> >
> >> >> > Ta
> >> >> >
> >> >> >
> >>
>
>
Is there any way I can measure it. I'm interested in finding out more tho.
And surely the delay caused by a Slave CD/DVD will be replaced by the delay
caused by haveing a slave HDD. Also the CD/DVD drive is accessed maybe once a
week. Each of the HDD droives are accessed every hour of every day. So surely
I'm replacing a delay which has no practical impact, with a delay which would
have a constant impact?
Colin
"Mick Murphy" wrote:
> I assume you are using the other 2 IDE HD as storage.
>
> Why don't you have a Master(operating system) and Slave(Storage) HD on main
> IDE channel, and the CD/DVD + the other HD(storage) on the other IDE channel?
>
> Or scrap the second HD on CD IDE channel, and go USB External HD
>
> Just a thought to speed things up a bit!
> --
> Mick Murphy - Qld - Australia
>
>
> "ColMac" wrote:
>
> > Don't have a lot of choice with 4 ide drives tho
> >
> > "Mick Murphy" wrote:
> >
> > > One thing; you are slowing down your computer by having your main HD and CD
> > > drive on the same IDE cable
> > >
> > > --
> > > Mick Murphy - Qld - Australia
> > >
> > >
> > > "ColMac" wrote:
> > >
> > > > I've got a silly question here. Its not really a problem, but I like my PC's
> > > > to be set up the way I like it, and anything that changes it annoys me.
> > > >
> > > > I have 3 physical IDE disks on my PC.
> > > >
> > > > I've just formatted the C drive on of the IDE drives, on one of my PC's and
> > > > re-installed everything, as it was time for a clean-up. To do this I
> > > > disconnected two IDE drives leaving me with an IDE HDD & a CD drive as the
> > > > slave. The Bios found them as Primary Master and Primary slave as expected.
> > > > Windows Disk Management COnsole showed my C Drive as Disk 0 again as expected.
> > > >
> > > > When all was working fine, I added the other HDD's as Secondary Master &
> > > > slave. Again the Bios showed them correctly.
> > > > .However Windows Disk Management had changed my original Disk 0 to Disk 2
> > > >
> > > > Any ideas why this happens or what I can do to prevent it. As I said its no
> > > > big deal and it doesn't cause real issues but for eg when testing disks I
> > > > like my C drive to be disk 0 to reduce the chance of an error in formatting
> > > > the wrong disk.
> > > >
> > > > Ta
> > > >
> > > >
AFAIK there is no performance hit unless you are using both at the same time
since an IDE bus can only send or receive from one device at a time.
"ColMac" <ColMac@discussions.microsoft.com> wrote in message
news:A7D06F87-29FB-4F69-9195-11F263C70C1A@microsoft.com...
> Is there really that much of a pereformance hit?
>
> Is there any way I can measure it. I'm interested in finding out more tho.
>
> And surely the delay caused by a Slave CD/DVD will be replaced by the
> delay
> caused by haveing a slave HDD. Also the CD/DVD drive is accessed maybe
> once a
> week. Each of the HDD droives are accessed every hour of every day. So
> surely
> I'm replacing a delay which has no practical impact, with a delay which
> would
> have a constant impact?
>
>
> Colin
>
>
>
>
>
>
>
>
> "Mick Murphy" wrote:
>
>> I assume you are using the other 2 IDE HD as storage.
>>
>> Why don't you have a Master(operating system) and Slave(Storage) HD on
>> main
>> IDE channel, and the CD/DVD + the other HD(storage) on the other IDE
>> channel?
>>
>> Or scrap the second HD on CD IDE channel, and go USB External HD
>>
>> Just a thought to speed things up a bit!
>> --
>> Mick Murphy - Qld - Australia
>>
>>
>> "ColMac" wrote:
>>
>> > Don't have a lot of choice with 4 ide drives tho
>> >
>> > "Mick Murphy" wrote:
>> >
>> > > One thing; you are slowing down your computer by having your main HD
>> > > and CD
>> > > drive on the same IDE cable
>> > >
>> > > --
>> > > Mick Murphy - Qld - Australia
>> > >
>> > >
>> > > "ColMac" wrote:
>> > >
>> > > > I've got a silly question here. Its not really a problem, but I
>> > > > like my PC's
>> > > > to be set up the way I like it, and anything that changes it annoys
>> > > > me.
>> > > >
>> > > > I have 3 physical IDE disks on my PC.
>> > > >
>> > > > I've just formatted the C drive on of the IDE drives, on one of my
>> > > > PC's and
>> > > > re-installed everything, as it was time for a clean-up. To do this
>> > > > I
>> > > > disconnected two IDE drives leaving me with an IDE HDD & a CD drive
>> > > > as the
>> > > > slave. The Bios found them as Primary Master and Primary slave as
>> > > > expected.
>> > > > Windows Disk Management COnsole showed my C Drive as Disk 0 again
>> > > > as expected.
>> > > >
>> > > > When all was working fine, I added the other HDD's as Secondary
>> > > > Master &
>> > > > slave. Again the Bios showed them correctly.
>> > > > .However Windows Disk Management had changed my original Disk 0 to
>> > > > Disk 2
>> > > >
>> > > > Any ideas why this happens or what I can do to prevent it. As I
>> > > > said its no
>> > > > big deal and it doesn't cause real issues but for eg when testing
>> > > > disks I
>> > > > like my C drive to be disk 0 to reduce the chance of an error in
>> > > > formatting
>> > > > the wrong disk.
>> > > >
>> > > > Ta
>> > > >
>> > > >
Disk No query (Vista 32 Home Premium) 
Linear Mode
