Need power supply for Sun Blade 1500 (Silver)

I need a replacement power supply for a Sun Blade 1500. Has anyone
successfully used a generic ATX power supply in one of these machines?
--
Jeff Wieland

In article <h0rgc2$u73$1@mailhub227.itcs.purdue.edu> Jeff Wieland <wieland@nospampurdue.edu> writes:
>I need a replacement power supply for a Sun Blade 1500. Has anyone
>successfully used a generic ATX power supply in one of these machines?
>--
>Jeff Wieland

The power supply is Samsung EPAP-420 if that helps anyone.
--
Jeff Wieland

On Jun 12, 2:18*am, Jeff Wieland <wiel...@nospampurdue.edu> wrote:
> In article <h0rgc2$u7...@mailhub227.itcs.purdue.edu> Jeff Wieland <wiel....@nospampurdue.edu> writes:
> >I need a replacement power supply for a Sun Blade 1500. *Has anyone
> >successfully used a generic ATX power supply in one of these machines?
> >--
> >Jeff Wieland
>
> The power supply is Samsung EPAP-420 if that helps anyone.
> --
> Jeff Wieland

as below:
PS1 connector:
+3.3V pin 13 , +3.3V pin 1
-12V pin 14 , +3.3V pin 2
GND pin 15, GND pin 3
PS-ON pin 16, +5 V pin 4
GND pin 17, GND pin 5
GND pin 18, +6 V pin 6
GND pin 19, GND pin 7
N/A pin 20, power Good pin 8
+5 pin 21, +5V pin 9
+5 pin 22, +12 V pin 10
+5 pin 23, +12 V pin 11
GNDpin 24, +3.3 V pin 12


PS2 connector:
pin 1,2,3,4,5,6,7,8 + 3.3V
pin 9,10 +12V


good luck.

On Thu, 11 Jun 2009 17:54:10 +0000 (UTC), Jeff Wieland <wieland@nospampurdue.edu> wrote:

>I need a replacement power supply for a Sun Blade 1500. Has anyone
>successfully used a generic ATX power supply in one of these machines?

I am using a generic ATX power supply in a Sunblade 150.

>--
>Jeff Wieland

Barry
=====
Home page
http://members.iinet.net.au/~barry.og