Acronis TI Home 11 - image corruption ?

Hi

had a few pc issues recently

so went for a full format of the c: partition
and full load from scratch

then after about 6 backups later - so pc fully loaded

acronis failed to start up - didnt think anything of it

was ok after

had a printer install hang - so had a forced reboot

so decided to go backto the image before the printer to be extra clean

acronis said image corrupt - oh dear . . .

anyway - if i boot up from the acronis boot cd - all images verify
so i reinstalled back to the one it wouldnt do before

pc back to normal

but every time i do a checkdisk it always finds a few minor errors

i know in it self they are nothing - e.g. unused indexes etc.

but its every time

it leaves me with an uneasy feeling - wondering if its HD or maybe the
sata cable ?


any ideas welcome

thanks

june wrote:
> Hi
>
> had a few pc issues recently
>
> so went for a full format of the c: partition
> and full load from scratch
>
> then after about 6 backups later - so pc fully loaded
>
> acronis failed to start up - didnt think anything of it
>
> was ok after
>
> had a printer install hang - so had a forced reboot
>
> so decided to go backto the image before the printer to be extra clean
>
> acronis said image corrupt - oh dear . . .
>
> anyway - if i boot up from the acronis boot cd - all images verify
> so i reinstalled back to the one it wouldnt do before
>
> pc back to normal
>
> but every time i do a checkdisk it always finds a few minor errors
>
> i know in it self they are nothing - e.g. unused indexes etc.
>
> but its every time
>
> it leaves me with an uneasy feeling - wondering if its HD or maybe the
> sata cable ?
>
>
> any ideas welcome
>
> thanks
>


from speedfan smart readings

Attribute Current Raw Overall
Raw Read Error Rate 100 0 Normal
3Spin Up Time 77 7640 Normal
Start/Stop Count 100 217 Very good
Reallocated Sector Count100 0 Very good
Seek Error Rate 253 0 Very good
Seek Time Performance 100 0 Very good
Power On Hours Count 100 556 Very good
Spin Retry Count 100 0 Very good
Calibration Retry Count 100 0 Very good
Power Cycle Count 100 214 Very good
Read Soft Error Rate 100 0 Normal
Unknown attribute 183 100 0 Very good
Unknown attribute 184 100 0 Very good
Unknown attribute 187 100 0 Very good
Unknown attribute 188 100 0 Very good
Airflow Temperature 74 437321754 Good
Hardware ECC Recovered 100 166714 Very good
Reallocated Event Count 100 0 Very good
Current Pending Sector 100 0 Very good
Offline Uncorrectable Sector Count 100 0 Very good
Ultra DMA CRC Error Rate 100 0 Normal
Write Error Rate 100 0 Normal
Soft Read Error Rate 253 0 Very good

june <june@june.com> wrote:
> june wrote:
>> Hi
>>
>> had a few pc issues recently
>>
>> so went for a full format of the c: partition
>> and full load from scratch
>>
>> then after about 6 backups later - so pc fully loaded
>>
>> acronis failed to start up - didnt think anything of it
>>
>> was ok after
>>
>> had a printer install hang - so had a forced reboot
>>
>> so decided to go backto the image before the printer to be extra
>> clean acronis said image corrupt - oh dear . . .
>>
>> anyway - if i boot up from the acronis boot cd - all images verify
>> so i reinstalled back to the one it wouldnt do before
>>
>> pc back to normal
>>
>> but every time i do a checkdisk it always finds a few minor errors
>>
>> i know in it self they are nothing - e.g. unused indexes etc.
>>
>> but its every time
>>
>> it leaves me with an uneasy feeling - wondering if its HD or maybe
>> the sata cable ?
>>
>>
>> any ideas welcome
>>
>> thanks
>>
>
>
> from speedfan smart readings
>
> Attribute Current Raw Overall
> Raw Read Error Rate 100 0 Normal
> 3Spin Up Time 77 7640 Normal
> Start/Stop Count 100 217 Very good
> Reallocated Sector Count100 0 Very good
> Seek Error Rate 253 0 Very good
> Seek Time Performance 100 0 Very good
> Power On Hours Count 100 556 Very good
> Spin Retry Count 100 0 Very good
> Calibration Retry Count 100 0 Very good
> Power Cycle Count 100 214 Very good
> Read Soft Error Rate 100 0 Normal
> Unknown attribute 183 100 0 Very good
> Unknown attribute 184 100 0 Very good
> Unknown attribute 187 100 0 Very good
> Unknown attribute 188 100 0 Very good
> Airflow Temperature 74 437321754 Good
> Hardware ECC Recovered 100 166714 Very good
> Reallocated Event Count 100 0 Very good
> Current Pending Sector 100 0 Very good
> Offline Uncorrectable Sector Count 100 0 Very good
> Ultra DMA CRC Error Rate 100 0 Normal
> Write Error Rate 100 0 Normal
> Soft Read Error Rate 253 0 Very good

The hard drive looks fine.

Is there anything useful in the system logs ?

You dont say what OS you are using.

Rod Speed wrote:
> june <june@june.com> wrote:
>> june wrote:
>>> Hi
>>>
>>> had a few pc issues recently
>>>
>>> so went for a full format of the c: partition
>>> and full load from scratch
>>>
>>> then after about 6 backups later - so pc fully loaded
>>>
>>> acronis failed to start up - didnt think anything of it
>>>
>>> was ok after
>>>
>>> had a printer install hang - so had a forced reboot
>>>
>>> so decided to go backto the image before the printer to be extra
>>> clean acronis said image corrupt - oh dear . . .
>>>
>>> anyway - if i boot up from the acronis boot cd - all images verify
>>> so i reinstalled back to the one it wouldnt do before
>>>
>>> pc back to normal
>>>
>>> but every time i do a checkdisk it always finds a few minor errors
>>>
>>> i know in it self they are nothing - e.g. unused indexes etc.
>>>
>>> but its every time
>>>
>>> it leaves me with an uneasy feeling - wondering if its HD or maybe
>>> the sata cable ?
>>>
>>>
>>> any ideas welcome
>>>
>>> thanks
>>>
>>
>> from speedfan smart readings
>>
>> Attribute Current Raw Overall
>> Raw Read Error Rate 100 0 Normal
>> 3Spin Up Time 77 7640 Normal
>> Start/Stop Count 100 217 Very good
>> Reallocated Sector Count100 0 Very good
>> Seek Error Rate 253 0 Very good
>> Seek Time Performance 100 0 Very good
>> Power On Hours Count 100 556 Very good
>> Spin Retry Count 100 0 Very good
>> Calibration Retry Count 100 0 Very good
>> Power Cycle Count 100 214 Very good
>> Read Soft Error Rate 100 0 Normal
>> Unknown attribute 183 100 0 Very good
>> Unknown attribute 184 100 0 Very good
>> Unknown attribute 187 100 0 Very good
>> Unknown attribute 188 100 0 Very good
>> Airflow Temperature 74 437321754 Good
>> Hardware ECC Recovered 100 166714 Very good
>> Reallocated Event Count 100 0 Very good
>> Current Pending Sector 100 0 Very good
>> Offline Uncorrectable Sector Count 100 0 Very good
>> Ultra DMA CRC Error Rate 100 0 Normal
>> Write Error Rate 100 0 Normal
>> Soft Read Error Rate 253 0 Very good
>
> The hard drive looks fine.
>
> Is there anything useful in the system logs ?
>
> You dont say what OS you are using.
>
>

hi

xp pro sp3


error code
==========

32 (0x70020) date time The archive is corrupted: None


502 (0x101F6) date time Operation with partition "0-0" was terminated
details image corruption (0x70020)
tag = 0xF5F8CBCF76155638


not checked disk for a day - so might do tomorrow


the big tag show sup on google but in foreign

http://www.google.co.uk/search?q=0xF...s=sn4&filter=0

june wrote:
> Rod Speed wrote:
>> june <june@june.com> wrote:
>>> june wrote:
>>>> Hi
>>>>
>>>> had a few pc issues recently
>>>>
>>>> so went for a full format of the c: partition
>>>> and full load from scratch
>>>>
>>>> then after about 6 backups later - so pc fully loaded
>>>>
>>>> acronis failed to start up - didnt think anything of it
>>>>
>>>> was ok after
>>>>
>>>> had a printer install hang - so had a forced reboot
>>>>
>>>> so decided to go backto the image before the printer to be extra
>>>> clean acronis said image corrupt - oh dear . . .
>>>>
>>>> anyway - if i boot up from the acronis boot cd - all images verify
>>>> so i reinstalled back to the one it wouldnt do before
>>>>
>>>> pc back to normal
>>>>
>>>> but every time i do a checkdisk it always finds a few minor errors
>>>>
>>>> i know in it self they are nothing - e.g. unused indexes etc.
>>>>
>>>> but its every time
>>>>
>>>> it leaves me with an uneasy feeling - wondering if its HD or maybe
>>>> the sata cable ?
>>>>
>>>>
>>>> any ideas welcome
>>>>
>>>> thanks
>>>>
>>>
>>> from speedfan smart readings
>>>
>>> Attribute Current Raw Overall
>>> Raw Read Error Rate 100 0 Normal
>>> 3Spin Up Time 77 7640 Normal
>>> Start/Stop Count 100 217 Very good
>>> Reallocated Sector Count100 0 Very good
>>> Seek Error Rate 253 0 Very good
>>> Seek Time Performance 100 0 Very good
>>> Power On Hours Count 100 556 Very good
>>> Spin Retry Count 100 0 Very good
>>> Calibration Retry Count 100 0 Very good
>>> Power Cycle Count 100 214 Very good
>>> Read Soft Error Rate 100 0 Normal
>>> Unknown attribute 183 100 0 Very good
>>> Unknown attribute 184 100 0 Very good
>>> Unknown attribute 187 100 0 Very good
>>> Unknown attribute 188 100 0 Very good
>>> Airflow Temperature 74 437321754 Good
>>> Hardware ECC Recovered 100 166714 Very good
>>> Reallocated Event Count 100 0 Very good
>>> Current Pending Sector 100 0 Very good
>>> Offline Uncorrectable Sector Count 100 0 Very good
>>> Ultra DMA CRC Error Rate 100 0 Normal
>>> Write Error Rate 100 0 Normal
>>> Soft Read Error Rate 253 0 Very good
>>
>> The hard drive looks fine.
>>
>> Is there anything useful in the system logs ?
>>
>> You dont say what OS you are using.
>>
>
> hi
>
> xp pro sp3
>
>
> error code
> ==========
>
> 32 (0x70020) date time The archive is corrupted: None
>
>
> 502 (0x101F6) date time Operation with partition "0-0" was terminated
> details image corruption (0x70020)
> tag = 0xF5F8CBCF76155638
>
>
> not checked disk for a day - so might do tomorrow
>
>
> the big tag show sup on google but in foreign
>
> http://www.google.co.uk/search?q=0xF...s=sn4&filter=0
>
>
>
>
>
>
>
>
>
>


and the little tag is there as well

june <june@june.com> wrote:
> Rod Speed wrote:
>> june <june@june.com> wrote:
>>> june wrote:
>>>> Hi
>>>>
>>>> had a few pc issues recently
>>>>
>>>> so went for a full format of the c: partition
>>>> and full load from scratch
>>>>
>>>> then after about 6 backups later - so pc fully loaded
>>>>
>>>> acronis failed to start up - didnt think anything of it
>>>>
>>>> was ok after
>>>>
>>>> had a printer install hang - so had a forced reboot
>>>>
>>>> so decided to go backto the image before the printer to be extra
>>>> clean acronis said image corrupt - oh dear . . .
>>>>
>>>> anyway - if i boot up from the acronis boot cd - all images verify
>>>> so i reinstalled back to the one it wouldnt do before
>>>>
>>>> pc back to normal
>>>>
>>>> but every time i do a checkdisk it always finds a few minor errors
>>>>
>>>> i know in it self they are nothing - e.g. unused indexes etc.
>>>>
>>>> but its every time
>>>>
>>>> it leaves me with an uneasy feeling - wondering if its HD or maybe
>>>> the sata cable ?
>>>>
>>>>
>>>> any ideas welcome
>>>>
>>>> thanks
>>>>
>>>
>>> from speedfan smart readings
>>>
>>> Attribute Current Raw Overall
>>> Raw Read Error Rate 100 0 Normal
>>> 3Spin Up Time 77 7640 Normal
>>> Start/Stop Count 100 217 Very good
>>> Reallocated Sector Count100 0 Very good
>>> Seek Error Rate 253 0 Very good
>>> Seek Time Performance 100 0 Very good
>>> Power On Hours Count 100 556 Very good
>>> Spin Retry Count 100 0 Very good
>>> Calibration Retry Count 100 0 Very good
>>> Power Cycle Count 100 214 Very good
>>> Read Soft Error Rate 100 0 Normal
>>> Unknown attribute 183 100 0 Very good
>>> Unknown attribute 184 100 0 Very good
>>> Unknown attribute 187 100 0 Very good
>>> Unknown attribute 188 100 0 Very good
>>> Airflow Temperature 74 437321754 Good
>>> Hardware ECC Recovered 100 166714 Very good
>>> Reallocated Event Count 100 0 Very good
>>> Current Pending Sector 100 0 Very good
>>> Offline Uncorrectable Sector Count 100 0 Very good
>>> Ultra DMA CRC Error Rate 100 0 Normal
>>> Write Error Rate 100 0 Normal
>>> Soft Read Error Rate 253 0 Very good
>>
>> The hard drive looks fine.
>>
>> Is there anything useful in the system logs ?
>>
>> You dont say what OS you are using.
>>
>>
>
> hi
>
> xp pro sp3
>
>
> error code
> ==========
>
> 32 (0x70020) date time The archive is corrupted: None
>
>
> 502 (0x101F6) date time Operation with partition "0-0" was
> terminated details image corruption (0x70020)
> tag = 0xF5F8CBCF76155638

I meant the XP system logs, not the TI logs.


> not checked disk for a day - so might do tomorrow
>
>
> the big tag show sup on google but in foreign
>
> http://www.google.co.uk/search?q=0xF...s=sn4&filter=0

Rod Speed wrote:
> june <june@june.com> wrote:
>> Rod Speed wrote:
>>> june <june@june.com> wrote:
>>>> june wrote:
>>>>> Hi
>>>>>
>>>>> had a few pc issues recently
>>>>>
>>>>> so went for a full format of the c: partition
>>>>> and full load from scratch
>>>>>
>>>>> then after about 6 backups later - so pc fully loaded
>>>>>
>>>>> acronis failed to start up - didnt think anything of it
>>>>>
>>>>> was ok after
>>>>>
>>>>> had a printer install hang - so had a forced reboot
>>>>>
>>>>> so decided to go backto the image before the printer to be extra
>>>>> clean acronis said image corrupt - oh dear . . .
>>>>>
>>>>> anyway - if i boot up from the acronis boot cd - all images verify
>>>>> so i reinstalled back to the one it wouldnt do before
>>>>>
>>>>> pc back to normal
>>>>>
>>>>> but every time i do a checkdisk it always finds a few minor errors
>>>>>
>>>>> i know in it self they are nothing - e.g. unused indexes etc.
>>>>>
>>>>> but its every time
>>>>>
>>>>> it leaves me with an uneasy feeling - wondering if its HD or maybe
>>>>> the sata cable ?
>>>>>
>>>>>
>>>>> any ideas welcome
>>>>>
>>>>> thanks
>>>>>
>>>> from speedfan smart readings
>>>>
>>>> Attribute Current Raw Overall
>>>> Raw Read Error Rate 100 0 Normal
>>>> 3Spin Up Time 77 7640 Normal
>>>> Start/Stop Count 100 217 Very good
>>>> Reallocated Sector Count100 0 Very good
>>>> Seek Error Rate 253 0 Very good
>>>> Seek Time Performance 100 0 Very good
>>>> Power On Hours Count 100 556 Very good
>>>> Spin Retry Count 100 0 Very good
>>>> Calibration Retry Count 100 0 Very good
>>>> Power Cycle Count 100 214 Very good
>>>> Read Soft Error Rate 100 0 Normal
>>>> Unknown attribute 183 100 0 Very good
>>>> Unknown attribute 184 100 0 Very good
>>>> Unknown attribute 187 100 0 Very good
>>>> Unknown attribute 188 100 0 Very good
>>>> Airflow Temperature 74 437321754 Good
>>>> Hardware ECC Recovered 100 166714 Very good
>>>> Reallocated Event Count 100 0 Very good
>>>> Current Pending Sector 100 0 Very good
>>>> Offline Uncorrectable Sector Count 100 0 Very good
>>>> Ultra DMA CRC Error Rate 100 0 Normal
>>>> Write Error Rate 100 0 Normal
>>>> Soft Read Error Rate 253 0 Very good
>>> The hard drive looks fine.
>>>
>>> Is there anything useful in the system logs ?
>>>
>>> You dont say what OS you are using.
>>>
>>>
>> hi
>>
>> xp pro sp3
>>
>>
>> error code
>> ==========
>>
>> 32 (0x70020) date time The archive is corrupted: None
>>
>>
>> 502 (0x101F6) date time Operation with partition "0-0" was
>> terminated details image corruption (0x70020)
>> tag = 0xF5F8CBCF76155638
>
> I meant the XP system logs, not the TI logs.
>
>
>> not checked disk for a day - so might do tomorrow
>>
>>
>> the big tag show sup on google but in foreign
>>
>> http://www.google.co.uk/search?q=0xF...s=sn4&filter=0
>
>


this is the HP printer hang

Faulting application autorun.exe, version 6.0.0.0, faulting module
autorun.exe, version 6.0.0.0, fault address 0x0000ea61.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

Previously june <june@june.com> wrote:
> june wrote:
>> Hi
>>
>> had a few pc issues recently
>>
>> so went for a full format of the c: partition
>> and full load from scratch
>>
>> then after about 6 backups later - so pc fully loaded
>>
>> acronis failed to start up - didnt think anything of it
>>
>> was ok after
>>
>> had a printer install hang - so had a forced reboot
>>
>> so decided to go backto the image before the printer to be extra clean
>>
>> acronis said image corrupt - oh dear . . .
>>
>> anyway - if i boot up from the acronis boot cd - all images verify
>> so i reinstalled back to the one it wouldnt do before
>>
>> pc back to normal
>>
>> but every time i do a checkdisk it always finds a few minor errors
>>
>> i know in it self they are nothing - e.g. unused indexes etc.
>>
>> but its every time
>>
>> it leaves me with an uneasy feeling - wondering if its HD or maybe the
>> sata cable ?
>>
>>
>> any ideas welcome
>>
>> thanks
>>


> from speedfan smart readings

> Attribute Current Raw Overall
> Raw Read Error Rate 100 0 Normal
> 3Spin Up Time 77 7640 Normal
> Start/Stop Count 100 217 Very good
> Reallocated Sector Count100 0 Very good
> Seek Error Rate 253 0 Very good
> Seek Time Performance 100 0 Very good
> Power On Hours Count 100 556 Very good
> Spin Retry Count 100 0 Very good
> Calibration Retry Count 100 0 Very good
> Power Cycle Count 100 214 Very good
> Read Soft Error Rate 100 0 Normal
> Unknown attribute 183 100 0 Very good
> Unknown attribute 184 100 0 Very good
> Unknown attribute 187 100 0 Very good
> Unknown attribute 188 100 0 Very good
> Airflow Temperature 74 437321754 Good
> Hardware ECC Recovered 100 166714 Very good
> Reallocated Event Count 100 0 Very good
> Current Pending Sector 100 0 Very good
> Offline Uncorrectable Sector Count 100 0 Very good
> Ultra DMA CRC Error Rate 100 0 Normal
> Write Error Rate 100 0 Normal
> Soft Read Error Rate 253 0 Very good


The disk is fine and so is the cable. Maybe some pice of intrusive
spyware or a virus?

Arno