Epson RX 500 Output Size

I am scanning old pictures which are 2x2 or 4x4. I can't figure out to
make the scanned output into a full screen or 8X10.

Anyone that can help?

Pak

<pak.ecker@comcast.net> wrote in message
news:4804dbe9.258640575@newsgroups.comcast.net...
>I am scanning old pictures which are 2x2 or 4x4. I can't figure out to
> make the scanned output into a full screen or 8X10.
>
> Anyone that can help?
>
> Pak

Start here:
http://www.scantips.com/basics3c.html


If you want to print an 8 x10 from the 2x2 at 300 DPI (best print) you scan
the 2x2 at 1500 ppi. You will have to crop some of the scan because you
can't scale up a square to fit a rectangle. You can print a 10 x 10 or an 8
x 8 from the 2x2 picture.

For the 4x4 the scan is one half, or 750 ppi (scan an even number, 800)

Read your users guide on how to scan from a program and use/get the free
Irfanview at http://www.irfanview.net

User Guide for the RX500.
http://files.support.epson.com/pdf/rx500_/rx500_u1.pdf

How to scan from a program starts on page 63.

--
CSM1
http://www.carlmcmillan.com
--