Epson R265

Hi Group

A friend of mine as bought an Epson R265 and is struggling to achieve
print quality. I have an Epson R220 and have suggested that the settings
for quality are in the same place, under COPIES and PAGES. Does any one
know if this is correct?
Thanks to you all

sonsdad wrote:
> Hi Group
>
> A friend of mine as bought an Epson R265 and is struggling to achieve
> print quality. I have an Epson R220 and have suggested that the settings
> for quality are in the same place, under COPIES and PAGES. Does any one
> know if this is correct?
> Thanks to you all

I have an R265. The quality opions are shown in the main properties
window (right click tray icon/Printer Settings or click on properties
when printer window opens from an application). Is that what you meant?

--
Howard Neil

Hi Howard
I am sure that will be it. Thanks a lot

Howard Neil wrote:
> sonsdad wrote:
>> Hi Group
>>
>> A friend of mine as bought an Epson R265 and is struggling to achieve
>> print quality. I have an Epson R220 and have suggested that the
>> settings for quality are in the same place, under COPIES and PAGES.
>> Does any one know if this is correct?
>> Thanks to you all
>
> I have an R265. The quality opions are shown in the main properties
> window (right click tray icon/Printer Settings or click on properties
> when printer window opens from an application). Is that what you meant?
>

Hi

The settings advice was fine. Can you print 'black only' on the 265?

Cheers

sonsdad wrote:
> Hi Group
>
> A friend of mine as bought an Epson R265 and is struggling to achieve
> print quality. I have an Epson R220 and have suggested that the settings
> for quality are in the same place, under COPIES and PAGES. Does any one
> know if this is correct?
> Thanks to you all

sonsdad wrote:
> Hi
>
> The settings advice was fine. Can you print 'black only' on the 265?


Good question. I've had a look and, at first, could not find such a
selection. However, I eventually found it. From the properties window,
Main tab, click on the advanced button (bottom right). Then select
grayscale (bottom-ish left). It will then print in black only.


--
Howard Neil

Hi Howard

Once again thanks for your help

Howard Neil wrote:
> sonsdad wrote:
>> Hi
>>
>> The settings advice was fine. Can you print 'black only' on the 265?
>
>
> Good question. I've had a look and, at first, could not find such a
> selection. However, I eventually found it. From the properties window,
> Main tab, click on the advanced button (bottom right). Then select
> grayscale (bottom-ish left). It will then print in black only.
>
>