PC hangs at Raid configuration during boot

Like the title says, my PC hangs during boot just after the Press F10 to
enter to enter Raid setup message. Once the system warms up I can reboot and
get into Windows without problems. I assume this is likely a HD problem with
one of my RAID devices? Maybe a corrupt BIOS?

Any ideas?

"Bill Stock" <me7@privacy.net> wrote in message
news:5uo58fF1irre7U1@mid.individual.net...
> Like the title says, my PC hangs during boot just after the Press F10 to
> enter to enter Raid setup message. Once the system warms up I can reboot
> and get into Windows without problems. I assume this is likely a HD
> problem with one of my RAID devices? Maybe a corrupt BIOS?

Did you do anything to this system hardware or BIOS settings-wise prior to
this or was it working normally What m/b? What revision? What BIOS? What
type of RAID controller? Configured how? What type of drives? Does the RAID
array show as being healthy when you hit F10? What do you mean it boots
normally "once the system warms up "? How do you get it to boot if it hangs?
Highly doubtful it's a BIOS problem. But you need to supply way more info
for any meaningful advice....

On Jan 11, 4:23*pm, "Augustus" <no_...@nowhere.net> wrote:
> "Bill Stock" <m...@privacy.net> wrote in message
>
> news:5uo58fF1irre7U1@mid.individual.net...
>
> > Like the title says, my PC hangs during boot just after the Press F10 to
> > enter to enter Raid setup message. Once the system warms up I can reboot
> > and get into Windows without problems. I assume this is likely a HD
> > problem with one of my RAID devices? Maybe a corrupt BIOS?
>
> Did you do anything to this system hardware or BIOS settings-wise prior to
> this or was it working normally What m/b? What revision? What BIOS? What
> type of RAID controller? Configured how? What type of drives? Does the RAID
> array show as being healthy when you hit F10? *What do you mean it boots
> normally "once the system warms up "? How do you get it to boot if it hangs?
> Highly doubtful it's a BIOS problem. But you need to supply way more info
> for any meaningful advice....

One or more of you HDs may be slow to spin up and may not be upto
speed when the RAID BIOS kicks in.

If when it says RAID is broken and you hit restart and it works the I
would say the slow HD spin up is the problem. Some BIOS's have a boot
delay option to allow for slow HDs to come up to speed.

<dave2972@hotmail.com> wrote in message
news:db619684-f3f9-48c9-b255-5fc695ad1546@d68g2000hsg.googlegroups.com...
On Jan 11, 4:23 pm, "Augustus" <no_...@nowhere.net> wrote:
> "Bill Stock" <m...@privacy.net> wrote in message
>
> news:5uo58fF1irre7U1@mid.individual.net...
>
> > Like the title says, my PC hangs during boot just after the Press F10 to
> > enter to enter Raid setup message. Once the system warms up I can reboot
> > and get into Windows without problems. I assume this is likely a HD
> > problem with one of my RAID devices? Maybe a corrupt BIOS?
>
> Did you do anything to this system hardware or BIOS settings-wise prior to
> this or was it working normally What m/b? What revision? What BIOS? What
> type of RAID controller? Configured how? What type of drives? Does the
> RAID
> array show as being healthy when you hit F10? What do you mean it boots
> normally "once the system warms up "? How do you get it to boot if it
> hangs?
> Highly doubtful it's a BIOS problem. But you need to supply way more info
> for any meaningful advice....

One or more of you HDs may be slow to spin up and may not be upto
speed when the RAID BIOS kicks in.

If when it says RAID is broken and you hit restart and it works the I
would say the slow HD spin up is the problem. Some BIOS's have a boot
delay option to allow for slow HDs to come up to speed.

Yeah, that's what I think, but it takes a LONG time to warm up; sometimes
one to two minutes.

I ran SeaTools on both drives and the one drive fails, so I'm going to send
it off to Seagate when I get some packing for it.