HTFC Forums

H.T.F.C.

How To Fix Computers





Go Back   HTFC Forums > Articles > How-to Guides

Register FAQ Members List Calendar Search Today's Posts Mark Forums Read
  #1  
Old 03-28-2007, 01:56 PM
Overclocked's Avatar
Administrator
 
Join Date: Jan 2004
Posts: 702
Overclocked is an unknown quantity at this point
Default Troubleshooting Computer Freezes / Lockups

How familiar does the following sound? Your computer was working fine, but then suddenly started locking up (aka hanging or freezing), rebooting itself (crashing) or shutting down spontaneously? If you know only too well what I am talking about, then read on! Performing the simple steps below can fix the majority of lockup cases.

1. Check for recently installed software or hardware.
If the lockups started to happen after you installed a new peace of hardware, new software program, or new drivers, uninstall it and see if the problem goes away.
If you don't know what software you installed recently or don't know what changes made your computer crash, you can try System Restore which comes with XP. It restores your computer to a previous working state. Run the application from here: Start Menu -> Programs -> Accessories -> System Tools -> System Restore.

2. Run your antivirus program.
One of the first things to do in the case of sudden lockups is to run your antivirus program. Check your antivirus manufacturer's website for updates and latest virus definition files. (This is absolutely necessary, outdated antivirus is not going to be of any use!) If you don't have antivirus software installed - or if updates are unavailable - run one of the web-based antivirus scans that some major antivirus vendors like Trend Micro are offering for free.

3. Run some good spyware removal tool.
If your machine is not infected with any viruses, it is still possible that it has some harmful adware or spyware is present. Download and run some good spyware removal tool such as AdAware, Spybot S&D or SpywareBlaster. These tools are superb spyware prevention tools and provide regular updates.

4. Check for free hard drive space.
When no viruses are found, check out free hard drive space on drive C:. Make sure there is more than 20% of free space available; low disk space can lead to random lockups.

5. Check for overheating.
Overheating is another known cause of lockups. It can be caused by problems with fans inside the case, dust buildup, or other cooling problems. Make sure the power supply fan and CPU fan are running and free of dust buildup. You can check the temperatures inside the case by running Motherboard monitor http://mbm.livewiredev.com
- make sure the temperatures are within the preset limits. Be very careful while cleaning inside the computer case (use plastic vacuum crevice tool) and NEVER OPEN THE POWER SUPPLY CASE as it contains high voltage.

6. Check the hard disk.
Check the hard disk - it is possible that its logical structure is corrupted. To check the disk for errors, right-click on the disk C: icon in "My Computer", select the "Tools" tab, check all check boxes in the "Check disk options" field, and press the "Check now" button. It should ask whether you want to schedule the check next time you restart your computer - answer "Yes" and restart your PC. The check will be performed automatically after startup; it can take a while, so be patient. The program will attempt to fix some problems automatically – however, if the hard disk is failing physically, it will need to be replaced. It is also a good idea to run Disk Defragmenter (located in Start Menu > Programs > Accessories > System Tools) to optimize data placement on the hard disk for increased performance and reliability.

7. Check the memory.
Sometimes random lockups can be attributed to the computer memory (RAM) starting to fail. You can test the memory by running Windows Memory Diagnostic that can be downloaded from Microsoft Online Crash Analysis If memory problems are found, try re-seating the RAM (pull it out and plug it back in). If it doesn't work, replace the defective RAM.

8. Check for other hardware problems (advanced users).
More hardware-related problems can be diagnosed by running hardware tests from the Ultimate Boot CD that can be downloaded from Ultimate Boot CD - Overview However, you should only use it if you know what are you doing - some programs on that CD can be dangerous when used inappropriately (for example, some of them can wipe the contents of your hard disk).

9. Update Windows and drivers.
Some lockups can be caused by outdated software components. Everyone should ensure their Windows Updates are on automatic (Control Panel -> Automatic Updates). Set and forget - Windows will remember for you. (As an alternative you may want to run a windows update: http://windowsupdate.microsoft.com). Also ensure you regularly update all your hardware drivers from vendors' websites. These contain bug fixes and resolves compatibility issues with other hardware.

The above steps will help diagnose and eliminate the most common causes of lockups. Hundreds more of other possible scenarios need to be dealt with on a case-by-case basis, as it all goes down to your particular computer configuration. Asking in troubleshooting forums/newsgroups should help you figure out solutions to not-so-obvious lockup cases.
Reply With Quote
Sponsored Links
  #2  
Old 12-22-2008, 12:21 AM
Junior Member
 
Join Date: Dec 2008
Posts: 4
worme is on a distinguished road
Default

regarding overheating, does the amount of dust within the cpu fan area contribute to random lockups?
my cpu fan speed is at 0rpm at startup from the bios settings itself so i was jus wondering whether is my cpu fan faulty or there is too much dust?
Reply With Quote
  #3  
Old 12-22-2008, 04:02 AM
Overclocked's Avatar
Administrator
 
Join Date: Jan 2004
Posts: 702
Overclocked is an unknown quantity at this point
Default

Yep, it does matter and it definetely shouldn't be 0 rpm, even at startup. Does it spin at all when the PC boots to Windows?
Reply With Quote
  #4  
Old 12-22-2008, 02:20 PM
Junior Member
 
Join Date: Dec 2008
Posts: 4
worme is on a distinguished road
Default

nope it doesnt spin at all but i can see that my fan is clogged with dust.
tried using a pen to move the fan but to no avail.

what are the possible causes for a cpu fan to stop working?
e.g prolonged usage of the pc ?

its the fan in the duct that isnt working :
http://img229.imageshack.us/img229/1284/image038pn5.jpg

Last edited by worme : 12-22-2008 at 02:23 PM.
Reply With Quote
  #5  
Old 12-23-2008, 11:35 PM
Junior Member
 
Join Date: Dec 2008
Posts: 3
wareupdater is on a distinguished road
Default

Best to replace your defective FAN.

I agree that DUST is a cause for FAN freeze specially if it penetrates thru is mechanism inside the FAN. then regular cleaning of your CPU will prevent that.

I am personally a victim of DUST... I cann't even count how many times I've been to computer store for replacement.

nice POST Overclocked!
__________________
Freeware OpenSource
Reply With Quote
  #6  
Old 03-15-2009, 01:47 AM
Junior Member
 
Join Date: Mar 2009
Posts: 1
Obiden1konobe is on a distinguished road
Thumbs up Timely

Wow. I was looking for some answers to the very problem you wrote about. As a matter of fact I registered for this site after seeing your post.
Reply With Quote
  #7  
Old 05-27-2010, 12:58 PM
Junior Member
 
Join Date: May 2010
Posts: 3
sansouci is on a distinguished road
Default Excelent article

Excellent article administrator,
For the last 6 months my Vista has been unreliable at boot-up sometimes presenting a black screen with an endlessly flashing cursor top left, requiring me to restart several times to progress past it. Also during normal operation freezing completely at odd intervals mouse-cursor stuck, ctrl-alt-delete fails, only way out was to knock power off!
Remedy - turned out to be removing both RAM memory strips, running a pencil eraser along the copper strips (a tip I saw ages ago somewhere, quite why an eraser has magic powers, no idea! Figured it could do no harm) and reseated RAM back into slots. Hey presto fixed. Now running for 3 weeks without a hitch.
If you get these particular symptoms 'tis worth trying first. Administrator what do you reckon is this eraser trick worthwhile or a fairy-tale?

Last edited by sansouci : 05-27-2010 at 01:25 PM.
Reply With Quote
  #8  
Old 05-27-2010, 02:46 PM
Overclocked's Avatar
Administrator
 
Join Date: Jan 2004
Posts: 702
Overclocked is an unknown quantity at this point
Default

Yes, that's good idea. Also, rubbing them with a cotton swab that has been slightly dampened with alcohol helps too.
Reply With Quote
  #9  
Old 05-28-2010, 06:37 AM
rif rif is offline
Junior Member
 
Join Date: May 2010
Posts: 19
rif is on a distinguished road
Default

Here are a few more to add to the list:

Have any configurations been changed recently?

One that comes to mind is disabling virtual memory or changing BIOS settings. Sometimes that can cause crashing or freezing.


Has the computer been moved recently?

Possibly knocking something loose.


Are there any high current electrical devices on the same circuit as the computer?

Vacuum cleaners, air conditioners, microwaves, refrigerators, and hair dryers may interfere with the power delivery to the computer.


Whats the environment like where the computer is located?

Extreme temparatures, high humidity, and smoke may make the system unstable and run unpredictably.
Reply With Quote
  #10  
Old 08-31-2010, 01:06 AM
Junior Member
 
Join Date: Jul 2010
Posts: 22
Charles_Schilli is on a distinguished road
Default

(Psst, jdedrzea. Start a new thread. Not only does it cut confusion about who is responding to what, it also makes it easier for people with the same problem to find the discussion.)
Reply With Quote
Sponsored Links
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes



All times are GMT. The time now is 08:56 AM.


Powered by vBulletin® Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
© 2004 - 2007 Web-S-Sense Pty. Ltd. Usenet and forums posts © their respective authors.
Ad Management by RedTyger