What mobo to replace Abit IC7 G

8xAGP
Intel 3.2 chip
SATA RAID
Memory is (2) CMX512-3200PT XMS3200 512M 400Mz


Will this one work?
http://www.xpcgear.com/p4sct.html

Better suggestion?

Thanks

Terry wrote:
> 8xAGP
> Intel 3.2 chip
> SATA RAID
> Memory is (2) CMX512-3200PT XMS3200 512M 400Mz
>
>
> Will this one work?
> http://www.xpcgear.com/p4sct.html
>
> Better suggestion?
>
> Thanks
>

That is an expensive board, but is well outfitted.
You won't find a lot of 875P boards like it, that is
for sure (they stopped shipping 875 chipsets a while
ago). Only issue would be what the BIOS is like,
in which case you should download a manual first and
check it out.

Paul

"Paul" <nospam@needed.com> wrote in message news:f8pe6v$vs2$2@aioe.org...
> Terry wrote:
> > 8xAGP
> > Intel 3.2 chip
> > SATA RAID
> > Memory is (2) CMX512-3200PT XMS3200 512M 400Mz
> >
> >
> > Will this one work?
> > http://www.xpcgear.com/p4sct.html
> >
> > Better suggestion?
> >
> > Thanks
> >
>
> That is an expensive board, but is well outfitted.
> You won't find a lot of 875P boards like it, that is
> for sure (they stopped shipping 875 chipsets a while
> ago). Only issue would be what the BIOS is like,
> in which case you should download a manual first and
> check it out.

The specs list memory voltage as "2.5V only". Could be an
issue if you intend to overclock. Otherwise it looks like an
excellent board.

On Wed, 1 Aug 2007 01:32:11 -0700, <nospam@sbcglobal.invalid.net>
wrote:

>"Paul" <nospam@needed.com> wrote in message news:f8pe6v$vs2$2@aioe.org...
>> Terry wrote:
>> > 8xAGP
>> > Intel 3.2 chip
>> > SATA RAID
>> > Memory is (2) CMX512-3200PT XMS3200 512M 400Mz
>> >
>> >
>> > Will this one work?
>> > http://www.xpcgear.com/p4sct.html
>> >
>> > Better suggestion?
>> >
>> > Thanks
>> >
>>
>> That is an expensive board, but is well outfitted.
>> You won't find a lot of 875P boards like it, that is
>> for sure (they stopped shipping 875 chipsets a while
>> ago). Only issue would be what the BIOS is like,
>> in which case you should download a manual first and
>> check it out.
>
>The specs list memory voltage as "2.5V only". Could be an
>issue if you intend to overclock. Otherwise it looks like an
>excellent board.
>

I don't plan to overclock.

Thanks everyone. I am going with this one.
It is really the only one I could find.