Need some setup help

I'm attempting to install XP Pro on a MSI K9A2 Platinum on a single HD
that's on one of the 2 Promise SATA ports. I eventually want to install a
RAID1 on the ATI SB600 ports so I am only installing that RAID driver during
windows setup. But after press F6 and install the drivers and it begins to
start the windows installation I get a blue screenwith a 0x0000007B stop
code. Is this because I didn't install the Promise drivers? I can't see why
it would need them if I intend to run those 2 in ATA mode.

I know the drive's good... it was in another computer as a storage drive and
I can pop it out of this new build and put it back in the old computer and
it works just fine.
--

"Matthew" <Im@yourmomshouse.com> wrote in message
news:kfGdnSqvhawBg_HVnZ2dnUVZ_gadnZ2d@comcast.com. ..
> I'm attempting to install XP Pro on a MSI K9A2 Platinum on a single HD
> that's on one of the 2 Promise SATA ports. I eventually want to install a
> RAID1 on the ATI SB600 ports so I am only installing that RAID driver
> during windows setup. But after press F6 and install the drivers and it
> begins to start the windows installation I get a blue screenwith a
> 0x0000007B stop code. Is this because I didn't install the Promise
> drivers? I can't see why it would need them if I intend to run those 2 in
> ATA mode.
>
> I know the drive's good... it was in another computer as a storage drive
> and I can pop it out of this new build and put it back in the old computer
> and it works just fine.
> --
>
>
never mind... apparently you do still have to install the Promise drivers...
live and learn...