Abit IP35 Pro - No CPU Temperature !!!

Hi all

I just assemble this above board with Core 2 Duo E8200 with Cool
Master Hyper TX2 Cooler and Corsair 2G memory.

Every thing is working fine, but neither in BIOS or in Abit Guru, I
see the CPU Temperature. It only says "N/A". I am familiar of modern
cpus. Is it ok or have I goofed off while installing CPU and Cooler
or the mother board is defective.

Can anybody familiar please shed some light on it. Thanks

"newbee" <newbee@noaddress.com> wrote in message
news:iuuns3tdvibl3v39ss038r9pdij0s9snq0@4ax.com...
> Hi all
>
> I just assemble this above board with Core 2 Duo E8200 with Cool
> Master Hyper TX2 Cooler and Corsair 2G memory.
>
> Every thing is working fine, but neither in BIOS or in Abit Guru, I
> see the CPU Temperature. It only says "N/A". I am familiar of modern
> cpus. Is it ok or have I goofed off while installing CPU and Cooler
> or the mother board is defective.
>
> Can anybody familiar please shed some light on it. Thanks

Have you tried removing the CMOS battery and then clearing CMOS with the
jumper set to clear for about 30 seconds, and then put it back the way it
was? -Dave