Socket 775 heatsink probs

Hi. Got a C2D E6600 with stock heatsink. Installed it on Friday without
too much issue (I thought). But this morning it's just been cutting out
after 20 seconds. Open it up and two of the screws on the heatsink have
come out. Whenever I put any pin in, the opposite one pops up, even if
I'm holding it down very hard with a screwdriver, it just comes up as
soon as I let go, and I can't make the thing stay down. What do I
do?!?! (and please don't say get another cooler, I need this computer
this afternoon urgently). Thanks.

--
Zo

Zomoniac wrote:
> Hi. Got a C2D E6600 with stock heatsink. Installed it on Friday
> without too much issue (I thought). But this morning it's just been
> cutting out after 20 seconds. Open it up and two of the screws on the
> heatsink have come out. Whenever I put any pin in, the opposite one
> pops up, even if I'm holding it down very hard with a screwdriver, it
> just comes up as soon as I let go, and I can't make the thing stay
> down. What do I do?!?! (and please don't say get another cooler, I
> need this computer this afternoon urgently). Thanks.

They aren't really screws, they are push pins and tabs. Do you have them
oriented correctly?
Review the installation video.
http://cache-www.intel.com/cd/00/00/...209_241209.wmv

Fred wrote:
> Zomoniac wrote:
>> Hi. Got a C2D E6600 with stock heatsink. Installed it on Friday
>> without too much issue (I thought). But this morning it's just been
>> cutting out after 20 seconds. Open it up and two of the screws on the
>> heatsink have come out. Whenever I put any pin in, the opposite one
>> pops up, even if I'm holding it down very hard with a screwdriver, it
>> just comes up as soon as I let go, and I can't make the thing stay
>> down. What do I do?!?! (and please don't say get another cooler, I
>> need this computer this afternoon urgently). Thanks.
>
> They aren't really screws, they are push pins and tabs. Do you have them
> oriented correctly?
> Review the installation video.
> http://cache-www.intel.com/cd/00/00/...209_241209.wmv
>

Some more pictures here:

http://www.hardwarezone.com/articles...15&cid=19&pg=6
http://www.hardwarezone.com/articles...9&id=1215&pg=7

Paul

Zomoniac <the_proper_one@hotmail.com> wrote in news:5c2f8eF2tqp5iU1
@mid.individual.net:

> Hi. Got a C2D E6600 with stock heatsink. Installed it on Friday without
> too much issue (I thought). But this morning it's just been cutting out
> after 20 seconds. Open it up and two of the screws on the heatsink have
> come out. Whenever I put any pin in, the opposite one pops up, even if
> I'm holding it down very hard with a screwdriver, it just comes up as
> soon as I let go, and I can't make the thing stay down. What do I
> do?!?! (and please don't say get another cooler, I need this computer
> this afternoon urgently). Thanks.
>

Hello,

See if this helps. Those pushpins can be quite annoying. :-)

http://www.mindspring.com/~anorton1/...2H.html#Stupid

--
Alan Norton
Reviews: ABIT AN8 SLI, ECS P965T-A & Foxconn 975X7AB-8EKRS2H Mb's
Arizona Pics and Cute Animal Pics
http://www.mindspring.com/~anorton1/

Zomoniac wrote:

> Hi. Got a C2D E6600 with stock heatsink. Installed it on Friday without
> too much issue (I thought). But this morning it's just been cutting out
> after 20 seconds. Open it up and two of the screws on the heatsink have
> come out. Whenever I put any pin in, the opposite one pops up, even if
> I'm holding it down very hard with a screwdriver, it just comes up as
> soon as I let go, and I can't make the thing stay down. What do I do?!?!
> (and please don't say get another cooler, I need this computer this
> afternoon urgently). Thanks.
>

Too bad about being in such a rush. But the better option is to look
around for a better heatsink/fan mounting system, preferably one that
really screws/bolts in and also clamps the heatsink to the CPU better
than the stock Intel. Too much synthetics being used and not so sturdy
at that. Just wait until you break one of these pushpin lockdowns.