I bought Silicom S2S DoubleSerial PCMCIA Card. And I have got a
problem. I installed DOS 6.22 and DOS drivers, but card was not working -
even, if IRQ and other parameters are manually specified.
Please look at this initialization communicat (it seems to be correct):
0 : System timer
1 : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
8 : System CMOS/real time clock
9 : Microsoft ACPI-Compliant System
9 : SCSI/RAID Host Controller
10 : Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA
12 : Elantech Touchpad
13 : Numeric data processor
14 : Primary IDE Channel
15 : Secondary IDE Channel
16 : ENE CB-712/714/810 Cardbus Controller
16 : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB
16 : Intel(R) PRO/Wireless 3945ABG Network Connection
16 : Mobile Intel(R) 945GM/PM/GMS/940GML and Intel(R) 945GT Express PCI
Express Root Port - 27A1
16 : NVIDIA GeForce Go 7600
17 : ENE PCI Memory Stick Card Reader Controller
17 : ENE PCI Secure Digital / MMC Card Reader Controller
17 : Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D0
17 : SDA Standard Compliant SD Host Controller
18 : Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D4
18 : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA
18 : Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC
19 : Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D6
19 : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9
20 : VIA OHCI Compliant IEEE 1394 Host Controller
22 : Microsoft UAA Bus Driver for High Definition Audio
23 : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8
23 : Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC
In Windows I can't even install this card - there is immediately blue
screen and computer resets....
Can you please provide me informagtion what should I do? Thanks!
On Wed, 9 Jan 2008 23:40:58 +0100, ******************
<orinoco@host.sk> wrote:
> I bought Silicom S2S DoubleSerial PCMCIA Card. And I have got a
> problem. I installed DOS 6.22 and DOS drivers, but card was not working -
> even, if IRQ and other parameters are manually specified.
>
> Please look at this initialization communicat (it seems to be correct):
>
> http://www.wlan.webd.pl/xxx/1.jpg
>
> Then, when I would like to test it there is an error:
>
> http://www.wlan.webd.pl/xxx/2.jpg
Does the manual tell you that you can test the serial port
without anything attached ? Did you attach something ?
Mostly, serial ports are tested with either a device or a loop
back plug attached.
I Would suggest to connect a loopback plug or, lacking one, some
serial device like a modem or a serial Mouse. http://www.hardwarebook.info/ will tell you how to built a
loopback plug.
"******************" <orinoco@host.sk> wrote in message
news:4injpt07b9q6.7ww1wsibd7yy.dlg@40tude.net...
> Dnia Wed, 09 Jan 2008 23:49:22 GMT, Gerard Bok napisał(a):
>
>> Does the manual tell you that you can test the serial port
>> without anything attached ? Did you attach something ?
>
> Yes, I attached many things. And the same result, nothing is working, test
> failed.
Did you recently buy this card? If so I suggest you contact the manufacturer
or the retailer with a view to replacing it.
--
Brian Cryer www.cryer.co.uk/brian
****************** <orinoco@host.sk> wrote on 09 Jan 2008
> I bought Silicom S2S DoubleSerial PCMCIA Card. And I have
> got a problem. I installed DOS 6.22 and DOS drivers, but
> card was not working - even, if IRQ and other parameters
> are manually specified.
>
Greetings,
I took a look at the setup info from the silicom site. It
appears that the s2s is looking for an os driver/interface
with a name like PC Card & Socket Services v 2.01. I did not
recognize this in the memory lists you posted.
Silicom DoubleSerial PC Card 
Linear Mode
