Hard Drive Swap

How difficult would it be to remove a bad hard drive and replace it with a
new one? I have an H/P machine (a1130n) with a SeaGate Hard Drive.

I've removed the ribbon cable and power cable. The entire assembly has a
green plastic retention device on the rails that hold the drive(s). How is
the retention assembly removed?

I s this a procedure than can be done by myself?

ANY help appreciated!

bigdummy wrote:
> How difficult would it be to remove a bad hard drive and replace it with a
> new one? I have an H/P machine (a1130n) with a SeaGate Hard Drive.
>
> I've removed the ribbon cable and power cable. The entire assembly has a
> green plastic retention device on the rails that hold the drive(s). How is
> the retention assembly removed?
>
> I s this a procedure than can be done by myself?
>
> ANY help appreciated!

See page 8 "Removing a drive".

http://h10032.www1.hp.com/ctg/Manual/c00311110.pdf

Paul