Fujitsu Error Codes

Hi guys,

I have an old (probably 10+ years) 30GB Fujitsu hard drive (2.5") that's
*******. The manufacturer's diagnostic program tells me it failed the test
with error code A101T7. Does anyone know where I would find a list of error
codes ? Obviously the drive is toast but I'd still like to know what the
cause of the error was.

Chris

On Sat, 3 Nov 2007 18:25:42 -0400, "Skeleton Man"
<invalid@guestwho.com> wrote:

>Hi guys,
>
>I have an old (probably 10+ years) 30GB Fujitsu hard drive (2.5") that's
>*******.

Very unlikely to be 30GB and 10+ years old. 10 years ago a
typical desktop drive capacity was around 4GB.




>The manufacturer's diagnostic program tells me it failed the test
>with error code A101T7. Does anyone know where I would find a list of error
>codes ? Obviously the drive is toast but I'd still like to know what the
>cause of the error was.

Get it from their website if anywhere... but look on the
media the diagnostic is on, or the installer/installed
folder if it's the type of util. that makes a floppy as
there might be some documentation. You might also email
them asking about the code.

Somewhere on the interweb "kony" typed:
> On Sat, 3 Nov 2007 18:25:42 -0400, "Skeleton Man"
> <invalid@guestwho.com> wrote:
>
> > Hi guys,
> >
> > I have an old (probably 10+ years) 30GB Fujitsu hard drive (2.5")
> > that's *******.
>
> Very unlikely to be 30GB and 10+ years old. 10 years ago a
> typical desktop drive capacity was around 4GB.

....and typical laptop drive (2.5") was 1-2GB.
--
TTFN

Shaun.

> > The manufacturer's diagnostic program tells me it failed the test
> > with error code A101T7. Does anyone know where I would find a list
> > of error codes ? Obviously the drive is toast but I'd still like to
> > know what the cause of the error was.
>
> Get it from their website if anywhere... but look on the
> media the diagnostic is on, or the installer/installed
> folder if it's the type of util. that makes a floppy as
> there might be some documentation. You might also email
> them asking about the code.