8KNXP Silicon Image and Intel RAID enables at once?

I'm using the Silicon Image RAID on my 8KNXP, and I was wondering if
there would be any problem enabling the Intel RAID ports too?

TIA.

should'nt be

"KatManDEW" <donwise@clover.net> wrote in message
news:dsjet3d16rg9fa0p656s5cu9hhgvc96ss2@4ax.com...
> I'm using the Silicon Image RAID on my 8KNXP, and I was wondering if
> there would be any problem enabling the Intel RAID ports too?
>
> TIA.

From one old man to another - Thanks ;-)

On Thu, 13 Mar 2008 23:07:14 GMT, "old man" <dl@spoofmail.notme>
wrote:

>should'nt be
>
>"KatManDEW" <donwise@clover.net> wrote in message
>news:dsjet3d16rg9fa0p656s5cu9hhgvc96ss2@4ax.com.. .
>> I'm using the Silicon Image RAID on my 8KNXP, and I was wondering if
>> there would be any problem enabling the Intel RAID ports too?
>>
>> TIA.
>

When I enable SATA RAID in the BIOS it will no longer boot from the
SIL mirrored set that I have on the Silicon Image controller, even
though I have the SIL mirrored set selected as the first boot device.

Do the boot drives need to be connected to the Intel controller?



On Thu, 13 Mar 2008 23:07:14 GMT, "old man" <dl@spoofmail.notme>
wrote:

>should'nt be
>
>"KatManDEW" <donwise@clover.net> wrote in message
>news:dsjet3d16rg9fa0p656s5cu9hhgvc96ss2@4ax.com.. .
>> I'm using the Silicon Image RAID on my 8KNXP, and I was wondering if
>> there would be any problem enabling the Intel RAID ports too?
>>
>> TIA.
>

No, are you saying it boots correctly if Intel raid dissabled, and then
doesnt boot if Intel enabled?

"KatManDEW" <donwise@clover.net> wrote in message
news:2dnot3pd1a1obotveqd88rdt4o6imq5qg7@4ax.com...
> When I enable SATA RAID in the BIOS it will no longer boot from the
> SIL mirrored set that I have on the Silicon Image controller, even
> though I have the SIL mirrored set selected as the first boot device.
>
> Do the boot drives need to be connected to the Intel controller?
>
>
>
> On Thu, 13 Mar 2008 23:07:14 GMT, "old man" <dl@spoofmail.notme>
> wrote:
>
>>should'nt be
>>
>>"KatManDEW" <donwise@clover.net> wrote in message
>>news:dsjet3d16rg9fa0p656s5cu9hhgvc96ss2@4ax.com. ..
>>> I'm using the Silicon Image RAID on my 8KNXP, and I was wondering if
>>> there would be any problem enabling the Intel RAID ports too?
>>>
>>> TIA.
>>

That's right. If I enable Intel raid, it won't boot from the mirrored
drives on the Silicon Image controller (which are my current boot
drives).


On Mon, 17 Mar 2008 13:25:18 GMT, "old man" <dl@spoofmail.notme>
wrote:

>No, are you saying it boots correctly if Intel raid dissabled, and then
>doesnt boot if Intel enabled?
>
>"KatManDEW" <donwise@clover.net> wrote in message
>news:2dnot3pd1a1obotveqd88rdt4o6imq5qg7@4ax.com.. .
>> When I enable SATA RAID in the BIOS it will no longer boot from the
>> SIL mirrored set that I have on the Silicon Image controller, even
>> though I have the SIL mirrored set selected as the first boot device.
>>
>> Do the boot drives need to be connected to the Intel controller?
>>
>>
>>
>> On Thu, 13 Mar 2008 23:07:14 GMT, "old man" <dl@spoofmail.notme>
>> wrote:
>>
>>>should'nt be
>>>
>>>"KatManDEW" <donwise@clover.net> wrote in message
>>>news:dsjet3d16rg9fa0p656s5cu9hhgvc96ss2@4ax.com ...
>>>> I'm using the Silicon Image RAID on my 8KNXP, and I was wondering if
>>>> there would be any problem enabling the Intel RAID ports too?
>>>>
>>>> TIA.
>>>
>

Then off hand I would say its a bios setting, allthough not this board, I
have two different sata controlers enabled and a sata card, with no
problems.
Double check the mobo manual for the settings

"KatManDEW" <donwise@clover.net> wrote in message
news:6qutt3dai64k0lldu213jg1cqim7omek4s@4ax.com...
> That's right. If I enable Intel raid, it won't boot from the mirrored
> drives on the Silicon Image controller (which are my current boot
> drives).
>
>
> On Mon, 17 Mar 2008 13:25:18 GMT, "old man" <dl@spoofmail.notme>
> wrote:
>
>>No, are you saying it boots correctly if Intel raid dissabled, and then
>>doesnt boot if Intel enabled?
>>
>>"KatManDEW" <donwise@clover.net> wrote in message
>>news:2dnot3pd1a1obotveqd88rdt4o6imq5qg7@4ax.com. ..
>>> When I enable SATA RAID in the BIOS it will no longer boot from the
>>> SIL mirrored set that I have on the Silicon Image controller, even
>>> though I have the SIL mirrored set selected as the first boot device.
>>>
>>> Do the boot drives need to be connected to the Intel controller?
>>>
>>>
>>>
>>> On Thu, 13 Mar 2008 23:07:14 GMT, "old man" <dl@spoofmail.notme>
>>> wrote:
>>>
>>>>should'nt be
>>>>
>>>>"KatManDEW" <donwise@clover.net> wrote in message
>>>>news:dsjet3d16rg9fa0p656s5cu9hhgvc96ss2@4ax.co m...
>>>>> I'm using the Silicon Image RAID on my 8KNXP, and I was wondering if
>>>>> there would be any problem enabling the Intel RAID ports too?
>>>>>
>>>>> TIA.
>>>>
>>

I'm using both the onboard SATA controllers, but only SATA RAID on the
Silicon Image controller. Do you have SATA RAID enabled for both the
onboard Intel and Silicon Image controllers?


On Tue, 18 Mar 2008 08:40:09 GMT, "old man" <dl@spoofmail.notme>
wrote:

>Then off hand I would say its a bios setting, allthough not this board, I
>have two different sata controlers enabled and a sata card, with no
>problems.
>Double check the mobo manual for the settings
>
>"KatManDEW" <donwise@clover.net> wrote in message
>news:6qutt3dai64k0lldu213jg1cqim7omek4s@4ax.com.. .
>> That's right. If I enable Intel raid, it won't boot from the mirrored
>> drives on the Silicon Image controller (which are my current boot
>> drives).
>>
>>
>> On Mon, 17 Mar 2008 13:25:18 GMT, "old man" <dl@spoofmail.notme>
>> wrote:
>>
>>>No, are you saying it boots correctly if Intel raid dissabled, and then
>>>doesnt boot if Intel enabled?
>>>
>>>"KatManDEW" <donwise@clover.net> wrote in message
>>>news:2dnot3pd1a1obotveqd88rdt4o6imq5qg7@4ax.com ...
>>>> When I enable SATA RAID in the BIOS it will no longer boot from the
>>>> SIL mirrored set that I have on the Silicon Image controller, even
>>>> though I have the SIL mirrored set selected as the first boot device.
>>>>
>>>> Do the boot drives need to be connected to the Intel controller?
>>>>
>>>>
>>>>
>>>> On Thu, 13 Mar 2008 23:07:14 GMT, "old man" <dl@spoofmail.notme>
>>>> wrote:
>>>>
>>>>>should'nt be
>>>>>
>>>>>"KatManDEW" <donwise@clover.net> wrote in message
>>>>>news:dsjet3d16rg9fa0p656s5cu9hhgvc96ss2@4ax.c om...
>>>>>> I'm using the Silicon Image RAID on my 8KNXP, and I was wondering if
>>>>>> there would be any problem enabling the Intel RAID ports too?
>>>>>>
>>>>>> TIA.
>>>>>
>>>
>

I'm using both the onboard SATA controllers, but only SATA RAID on the
Silicon Image controller. Do you have SATA RAID enabled for both the
onboard Intel and Silicon Image controllers?


On Tue, 18 Mar 2008 08:40:09 GMT, "old man" <dl@spoofmail.notme>
wrote:

>Then off hand I would say its a bios setting, allthough not this board, I
>have two different sata controlers enabled and a sata card, with no
>problems.
>Double check the mobo manual for the settings
>
>"KatManDEW" <donwise@clover.net> wrote in message
>news:6qutt3dai64k0lldu213jg1cqim7omek4s@4ax.com.. .
>> That's right. If I enable Intel raid, it won't boot from the mirrored
>> drives on the Silicon Image controller (which are my current boot
>> drives).
>>
>>
>> On Mon, 17 Mar 2008 13:25:18 GMT, "old man" <dl@spoofmail.notme>
>> wrote:
>>
>>>No, are you saying it boots correctly if Intel raid dissabled, and then
>>>doesnt boot if Intel enabled?
>>>
>>>"KatManDEW" <donwise@clover.net> wrote in message
>>>news:2dnot3pd1a1obotveqd88rdt4o6imq5qg7@4ax.com ...
>>>> When I enable SATA RAID in the BIOS it will no longer boot from the
>>>> SIL mirrored set that I have on the Silicon Image controller, even
>>>> though I have the SIL mirrored set selected as the first boot device.
>>>>
>>>> Do the boot drives need to be connected to the Intel controller?
>>>>
>>>>
>>>>
>>>> On Thu, 13 Mar 2008 23:07:14 GMT, "old man" <dl@spoofmail.notme>
>>>> wrote:
>>>>
>>>>>should'nt be
>>>>>
>>>>>"KatManDEW" <donwise@clover.net> wrote in message
>>>>>news:dsjet3d16rg9fa0p656s5cu9hhgvc96ss2@4ax.c om...
>>>>>> I'm using the Silicon Image RAID on my 8KNXP, and I was wondering if
>>>>>> there would be any problem enabling the Intel RAID ports too?
>>>>>>
>>>>>> TIA.
>>>>>
>>>
>

I have raid on the card not the two sata controlers

"KatManDEW" <donwise@clover.net> wrote in message
news:10bvt39jkvsqln6vst2out0s559gi1sf5o@4ax.com...
> I'm using both the onboard SATA controllers, but only SATA RAID on the
> Silicon Image controller. Do you have SATA RAID enabled for both the
> onboard Intel and Silicon Image controllers?
>
>
> On Tue, 18 Mar 2008 08:40:09 GMT, "old man" <dl@spoofmail.notme>
> wrote:
>
>>Then off hand I would say its a bios setting, allthough not this board, I
>>have two different sata controlers enabled and a sata card, with no
>>problems.
>>Double check the mobo manual for the settings
>>
>>"KatManDEW" <donwise@clover.net> wrote in message
>>news:6qutt3dai64k0lldu213jg1cqim7omek4s@4ax.com. ..
>>> That's right. If I enable Intel raid, it won't boot from the mirrored
>>> drives on the Silicon Image controller (which are my current boot
>>> drives).
>>>
>>>
>>> On Mon, 17 Mar 2008 13:25:18 GMT, "old man" <dl@spoofmail.notme>
>>> wrote:
>>>
>>>>No, are you saying it boots correctly if Intel raid dissabled, and then
>>>>doesnt boot if Intel enabled?
>>>>
>>>>"KatManDEW" <donwise@clover.net> wrote in message
>>>>news:2dnot3pd1a1obotveqd88rdt4o6imq5qg7@4ax.co m...
>>>>> When I enable SATA RAID in the BIOS it will no longer boot from the
>>>>> SIL mirrored set that I have on the Silicon Image controller, even
>>>>> though I have the SIL mirrored set selected as the first boot device.
>>>>>
>>>>> Do the boot drives need to be connected to the Intel controller?
>>>>>
>>>>>
>>>>>
>>>>> On Thu, 13 Mar 2008 23:07:14 GMT, "old man" <dl@spoofmail.notme>
>>>>> wrote:
>>>>>
>>>>>>should'nt be
>>>>>>
>>>>>>"KatManDEW" <donwise@clover.net> wrote in message
>>>>>>news:dsjet3d16rg9fa0p656s5cu9hhgvc96ss2@4ax. com...
>>>>>>> I'm using the Silicon Image RAID on my 8KNXP, and I was wondering if
>>>>>>> there would be any problem enabling the Intel RAID ports too?
>>>>>>>
>>>>>>> TIA.
>>>>>>
>>>>
>>