need mounting rails for an L866 dell

the L866 does not use the older screw=on mounting rails for the second
hard drive, which sits between the floppy drive and the cd/dvd drive.
these are the older GREEEN rails.

it uses a set of black rails which are fixed to the hard drive by spring
tension on a spring-like wire which runs between the two holes in the
rails and has two projections at the ends which enter into the screw holes
on the ide drive.

i tried the rails from the floppy drive, but it is too small.

anyone have a pair of these, or know where to get them?

--

life is a dream for the wise, a game for the fool, a comedy for the
rich, a tragedy for the poor - sholom aleichem
to email me, delete blackhole. from my return address

page 3-8 of the manual indicates that a spare set of rails are included with
the system and located under the front bezel.
http://support.dell.com/support/edoc...dcol/3558p.pdf
if they have gone missing then you can find them on ebay (one such listing
is found under item number 380052888432).

"arthur wouk" <awouk@blackhole.nyx.net> wrote in message
news:1257036065.503513@irys.nyx.net...
> the L866 does not use the older screw=on mounting rails for the second
> hard drive, which sits between the floppy drive and the cd/dvd drive.
> these are the older GREEEN rails.
>
> it uses a set of black rails which are fixed to the hard drive by spring
> tension on a spring-like wire which runs between the two holes in the
> rails and has two projections at the ends which enter into the screw holes
> on the ide drive.
>
> i tried the rails from the floppy drive, but it is too small.
>
> anyone have a pair of these, or know where to get them?
>
> --
>
> life is a dream for the wise, a game for the fool, a comedy for the
> rich, a tragedy for the poor - sholom aleichem
> to email me, delete blackhole. from my return address