Hello everybody!
Will region 5 DVD players playback region 1 DVD-videos, created in the
Nero 7 Vision 4? How to turn off the region 1 mark in the Nero 7
Vision 4? How to prevent a frame drop every second in a progressive
scan PAL DVD-video, created in the Nero 7 Vision 4 from a prossibly
interlaced scan NTSC video file? How to prevent 5.1 audio downmix to 2
channels in "Automatic" quality mode in the Nero 7 Vision 4?
Why does not www.nero.com has a forum? The nero support does not
reply.
Best regards,
Dima
D wrote:
> Hello everybody!
> Will region 5 DVD players playback region 1 DVD-videos, created in the
> Nero 7 Vision 4? How to turn off the region 1 mark in the Nero 7
> Vision 4? How to prevent a frame drop every second in a progressive
> scan PAL DVD-video, created in the Nero 7 Vision 4 from a prossibly
> interlaced scan NTSC video file? How to prevent 5.1 audio downmix to 2
> channels in "Automatic" quality mode in the Nero 7 Vision 4?
> Why does not www.nero.com has a forum? The nero support does not
> reply.
> Best regards,
> Dima
From my experience and expert input: the region marking of DVD-Video
cannot be written by normal software to normal recording hardware. Try
as you will, software purporting to let you set the region (e.g.,
DVDShrink) does not do what it says. All burned discs come out region 0.
Note that Nero 6 does not even give you a place to set the region since
such a setting will have no effect.
Since I am still running Nero 6, I cannot address your other questions.
I have guesses - such as the frame drop being an artifact of 25 to 29.97
fps - but prefer not to guess at all.
On Jul 18, 12:25 am, Mike Richter <mrich...@cpl.net> wrote:
> D wrote:
> > Hello everybody!
> > Will region 5 DVD players playback region 1 DVD-videos, created in the
> > Nero 7 Vision 4? How to turn off the region 1 mark in the Nero 7
> > Vision 4? How to prevent a frame drop every second in a progressive
> > scan PAL DVD-video, created in the Nero 7 Vision 4 from a prossibly
> > interlaced scan NTSC video file? How to prevent 5.1 audio downmix to 2
> > channels in "Automatic" quality mode in the Nero 7 Vision 4?
> > Why does notwww.nero.comhas a forum? The nero support does not
> > reply.
> > Best regards,
> > Dima
>
> From my experience and expert input: the region marking of DVD-Video
> cannot be written by normal software to normal recording hardware. Try
> as you will, software purporting to let you set the region (e.g.,
> DVDShrink) does not do what it says. All burned discs come out region 0.
> Note that Nero 6 does not even give you a place to set the region since
> such a setting will have no effect.
>
> Since I am still running Nero 6, I cannot address your other questions.
> I have guesses - such as the frame drop being an artifact of 25 to 29.97
> fps - but prefer not to guess at all.
>
> Mike
> --
> mrich...@cpl.nethttp://www.mrichter.com/
Dear Mike,
Yes, you are right about the region code!
Best regards,
Dima
On Jul 18, 4:53 am, smh <nos...@nospam.org> wrote:
> . --------------------------------------
> Mike Richter, were you born with
> "Scam Artist" emblazoned on your face?
> --------------------------------------
> http://tinyurl.com/6eldj
> http://tinyurl.com/2qnvph
> http://tinyurl.com/38wte6
> http://tinyurl.com/gqnae
> http://tinyurl.com/2xfbkz
>
> (No Mikey S-Lickers have been able to prove ANY of the above is a )
> (LIBEL -- despite Mikey claimed to have PROOF of libels & misquotes!)
> '
>
> D wrote:
>
> > Hello everybody!
> > Will region 5 DVD players playback region 1 DVD-videos, created in the
> > Nero 7 Vision 4? How to turn off the region 1 mark in the Nero 7
> > Vision 4?
>
> You rip with DVD Decrypter to change the region code:http://www.doom9.org/index.html?/dvddec.htm
>
> > How to prevent a frame drop every second in a progressive
> > scan PAL DVD-video, created in the Nero 7 Vision 4 from a prossibly
> > interlaced scan NTSC video file? How to prevent 5.1 audio downmix to 2
> > channels in "Automatic" quality mode in the Nero 7 Vision 4?
>
> Whenever Nero have problems in encoding/transcoding, TMPGEnc is ususally
> suggested. Perhaps you can get some hints from this:http://www.videohelp.com/tmpgenc.htm
>
> > Why does notwww.nero.comhas a forum? The nero support does not
> > reply.
>
> Try these forums:
>
> http://club.cdfreaks.com/index.php?
>
> http://club.cdfreaks.com/forumdisplay.php?f=48(Nero & InCD)http://club.cdfreaks.com/forumdisplay.php?f=73(Nero SDK)
>
> http://www.cdrlabs.com/phpBB/index.php
Thanks smh for the links!
How to burn "magic of flight.mpg" video file (downloaded from e-mule)
to a DVD-Video? Nero Vision 4 downmixes 5.1 audio to 2 channels,
although I did not set Vision to downmix. How to prevent the
downmixing?
Nero Vision 4 drops 5 frames in a row and leaved other 25 frames
intact every second to "convert" NTSC video to PAL DVD. This leads to
losses of some movements in the video. How to really convert NTSC
video to PAL DVD?
Should I make a progressive scan DVD from an interlaced video for a
better quality of playback on a progressive scan DVD player and a
progressive scan TV?
Best regards,
Dima
On Jul 20, 2:06 am, smh <nos...@nospam.org> wrote:
> . --------------------------------------
> Mike Richter, were you born with
> "Scam Artist" emblazoned on your face?
> --------------------------------------
> http://tinyurl.com/6eldj
> http://tinyurl.com/2qnvph
> http://tinyurl.com/38wte6
> http://tinyurl.com/gqnae
> http://tinyurl.com/2xfbkz
>
> (No Mikey S-Lickers have been able to prove ANY of the above is a )
> (LIBEL -- despite Mikey claimed to have PROOF of libels & misquotes!)
> '
>
>
>
>
>
> D wrote:
> > smh wrote:
> > > D wrote:
>
> > > > Hello everybody!
> > > > Will region 5 DVD players playback region 1 DVD-videos, created in the
> > > > Nero 7 Vision 4? How to turn off the region 1 mark in the Nero 7
> > > > Vision 4?
>
> > > You rip with DVD Decrypter to change the region code:
> > >http://www.doom9.org/index.html?/dvddec.htm
>
> > > > How to prevent a frame drop every second in a progressive
> > > > scan PAL DVD-video, created in the Nero 7 Vision 4 from a prossibly
> > > > interlaced scan NTSC video file? How to prevent 5.1 audio downmix to 2
> > > > channels in "Automatic" quality mode in the Nero 7 Vision 4?
>
> > > Whenever Nero have problems in encoding/transcoding, TMPGEnc is ususally
> > > suggested. Perhaps you can get some hints from this:
> > >http://www.videohelp.com/tmpgenc.htm
>
> > > > Why does notwww.nero.comhasa forum? The nero support does not
> > > > reply.
>
> > > Try these forums:
>
> > >http://club.cdfreaks.com/index.php?
>
> > >http://club.cdfreaks.com/forumdisplay.php?f=48(Nero & InCD)> >http://club.cdfreaks.com/forumdisplay.php?f=73(Nero SDK)
>
> > >http://www.cdrlabs.com/phpBB/index.php
>
> > Thanks smh for the links!
> > How to burn "magic of flight.mpg" video file (downloaded from e-mule)
> > to a DVD-Video? Nero Vision 4 downmixes 5.1 audio to 2 channels,
> > although I did not set Vision to downmix. How to prevent the
> > downmixing?
> > Nero Vision 4 drops 5 frames in a row and leaved other 25 frames
> > intact every second to "convert" NTSC video to PAL DVD. This leads to
> > losses of some movements in the video. How to really convert NTSC
> > video to PAL DVD?
> > Should I make a progressive scan DVD from an interlaced video for a
> > better quality of playback on a progressive scan DVD player and a
> > progressive scan TV?
> > Best regards,
> > Dima
>
> Converting NTSC to PAL brings up some problems. For example, NTSC is
> shortened because of 25 fps vs. 24 fps and this introduces audio sync
> problem. Check out some of the convert guides:
>
> How to convert PAL to NTSC or NTSC to PAL / Framerate conversionshttp://www.videohelp.com/convert#4;41- Hide quoted text -
>
> - Show quoted text -
Thanks smh!
On Jul 20, 2:06 am, smh <nos...@nospam.org> wrote:
> . --------------------------------------
> Mike Richter, were you born with
> "Scam Artist" emblazoned on your face?
> --------------------------------------
> http://tinyurl.com/6eldj
> http://tinyurl.com/2qnvph
> http://tinyurl.com/38wte6
> http://tinyurl.com/gqnae
> http://tinyurl.com/2xfbkz
>
> (No Mikey S-Lickers have been able to prove ANY of the above is a )
> (LIBEL -- despite Mikey claimed to have PROOF of libels & misquotes!)
> '
>
>
>
>
>
> D wrote:
> > smh wrote:
> > > D wrote:
>
> > > > Hello everybody!
> > > > Will region 5 DVD players playback region 1 DVD-videos, created in the
> > > > Nero 7 Vision 4? How to turn off the region 1 mark in the Nero 7
> > > > Vision 4?
>
> > > You rip with DVD Decrypter to change the region code:
> > >http://www.doom9.org/index.html?/dvddec.htm
>
> > > > How to prevent a frame drop every second in a progressive
> > > > scan PAL DVD-video, created in the Nero 7 Vision 4 from a prossibly
> > > > interlaced scan NTSC video file? How to prevent 5.1 audio downmix to 2
> > > > channels in "Automatic" quality mode in the Nero 7 Vision 4?
>
> > > Whenever Nero have problems in encoding/transcoding, TMPGEnc is ususally
> > > suggested. Perhaps you can get some hints from this:
> > >http://www.videohelp.com/tmpgenc.htm
>
> > > > Why does notwww.nero.comhasa forum? The nero support does not
> > > > reply.
>
> > > Try these forums:
>
> > >http://club.cdfreaks.com/index.php?
>
> > >http://club.cdfreaks.com/forumdisplay.php?f=48(Nero & InCD)> >http://club.cdfreaks.com/forumdisplay.php?f=73(Nero SDK)
>
> > >http://www.cdrlabs.com/phpBB/index.php
>
> > Thanks smh for the links!
> > How to burn "magic of flight.mpg" video file (downloaded from e-mule)
> > to a DVD-Video? Nero Vision 4 downmixes 5.1 audio to 2 channels,
> > although I did not set Vision to downmix. How to prevent the
> > downmixing?
> > Nero Vision 4 drops 5 frames in a row and leaved other 25 frames
> > intact every second to "convert" NTSC video to PAL DVD. This leads to
> > losses of some movements in the video. How to really convert NTSC
> > video to PAL DVD?
> > Should I make a progressive scan DVD from an interlaced video for a
> > better quality of playback on a progressive scan DVD player and a
> > progressive scan TV?
> > Best regards,
> > Dima
>
> Converting NTSC to PAL brings up some problems. For example, NTSC is
> shortened because of 25 fps vs. 24 fps and this introduces audio sync
> problem. Check out some of the convert guides:
>
> How to convert PAL to NTSC or NTSC to PAL / Framerate conversionshttp://www.videohelp.com/convert#4;41- Hide quoted text -
>
> - Show quoted text -
Thanks smh for replying!
Nero 7 Vision 4 false representation, unexpected behaviour 
Linear Mode
