Hello, I have an AB9 pro board and have had a few problems getting it
built. However, i thought life was dandy after some adviceon this
board and I had a nice new media pc !!
Now for some reason, on booting up the other day my nic was showing as
netowrk cable unplugged, despite the same cable being in as has always
been in. I swapped to the second ON BOARD nic and had the same error.
Change the cable, tried in both - same error. I changed the switch at
the other end, the cable and the port - same error. Checked all of the
connections I had used on my laptop - all working fine. Obviously the
issue is the dual onboard NIC.
I removed the NIC in device manager and rebooted. Item found but still
the same error.
On 31 Aug, 17:07, Wes Newell <w.new...@TAKEOUTverizon.net> wrote:
> On Thu, 30 Aug 2007 22:57:58 -0700, andrewstanton wrote:
> > I then enabled in BIOS and only one showed up....
>
> > I am at a loss....
>
> Corrupted driver? Running Windows? Virus.
>
> --
> Want the ultimate in free OTA SD/HDTV Recorder?http://mythtv.orghttp://mysettopbox....yth.htmlUsenet alt.video.ptv.mythtv
> My serverhttp://wesnewell.no-ip.com/cpu.php
> HD Tivo S3 comparedhttp://wesnewell.no-ip.com/mythtivo.htm
Windows XP Pro sp2 - fully patched.
No virus according to my anti virus
Driver updated, rolled back, uninstalled and reinstalled.... Still
nada....
On Sun, 02 Sep 2007 10:33:59 -0700, andrewstanton wrote:
> Windows XP Pro sp2 - fully patched.
>
> No virus according to my anti virus
>
> Driver updated, rolled back, uninstalled and reinstalled.... Still
> nada....
>
> The silence here is eary.....
It could have just failed. Might try one or more of the linux live cd's
and see if it works with it. Knoppix would be a good choice.
Happened to me too on an AN7 Shows up in device manager but always shows
network cable unplugged. I gave up and bought a NIC.
<andrewstanton@gmail.com> wrote in message
news:1188539878.443322.170050@l22g2000prc.googlegr oups.com...
> Hello, I have an AB9 pro board and have had a few problems getting it
> built. However, i thought life was dandy after some adviceon this
> board and I had a nice new media pc !!
>
> Now for some reason, on booting up the other day my nic was showing as
> netowrk cable unplugged, despite the same cable being in as has always
> been in. I swapped to the second ON BOARD nic and had the same error.
> Change the cable, tried in both - same error. I changed the switch at
> the other end, the cable and the port - same error. Checked all of the
> connections I had used on my laptop - all working fine. Obviously the
> issue is the dual onboard NIC.
>
> I removed the NIC in device manager and rebooted. Item found but still
> the same error.
>
> I disabled in BIOS and rebooted.
>
> I then enabled in BIOS and only one showed up....
>
> I am at a loss....
>
Onboard NIC Its Disapeared !!! 
Linear Mode
