Alienware abit av8 939 Motherboard after upgrade to abit 28 BSODs

[iqueve01]

I have an alienware av8 939 motherboad. Ater Upgrading to abit av8 bios 28, I get endles bsods. What could be the solution to this issue?

"iqueve01" <iqueve01.39e0va@no.email.invalid> wrote in message
news:iqueve01.39e0va@no.email.invalid...
>
> I have an alienware av8 939 motherboad. Ater Upgrading to abit av8 bios
> 28, I get endles bsods. What could be the solution to this issue?
>
>

Did you follow the instuctions at.
http://www.abit.com.tw/page/uk/download/guide.php
Make sure you clear your CMOS Data.
Try setting your BIOS to Load Fail-Safe Defaults see if that works.
Check your BIOS settings carefully
Then try Load Optimized Defaults, check your BIOS settings carefully.

If that doesn't work flash back to your previous working version.

"Seeker" <alec@thefrosts.f2s.com> wrote in message
news:_9SdnTdemql6dLPVnZ2dnUVZ8sPinZ2d@pipex.net...
>
> "iqueve01" <iqueve01.39e0va@no.email.invalid> wrote in message
> news:iqueve01.39e0va@no.email.invalid...
>>
>> I have an alienware av8 939 motherboad. Ater Upgrading to abit av8 bios
>> 28, I get endles bsods. What could be the solution to this issue?
>>
>>
>
> Did you follow the instuctions at.
> http://www.abit.com.tw/page/uk/download/guide.php
> Make sure you clear your CMOS Data.
> Try setting your BIOS to Load Fail-Safe Defaults see if that works.
> Check your BIOS settings carefully
> Then try Load Optimized Defaults, check your BIOS settings carefully.
>
> If that doesn't work flash back to your previous working version.
>
>
>
There is al so a useful guide at.
http://www.biosmods.com/guides/How_to_flash_a_BIOS.php

did you reload setup defaults (aka failsafe defaults) after flashing?

"Seeker" <alec@thefrosts.f2s.com> wrote in message
news:AuidnbyFwdsFcrPVnZ2dnUVZ8j6dnZ2d@pipex.net...
>
> "Seeker" <alec@thefrosts.f2s.com> wrote in message
> news:_9SdnTdemql6dLPVnZ2dnUVZ8sPinZ2d@pipex.net...
>>
>> "iqueve01" <iqueve01.39e0va@no.email.invalid> wrote in message
>> news:iqueve01.39e0va@no.email.invalid...
>>>
>>> I have an alienware av8 939 motherboad. Ater Upgrading to abit av8 bios
>>> 28, I get endles bsods. What could be the solution to this issue?
>>>
>>>
>>
>> Did you follow the instuctions at.
>> http://www.abit.com.tw/page/uk/download/guide.php
>> Make sure you clear your CMOS Data.
>> Try setting your BIOS to Load Fail-Safe Defaults see if that works.
>> Check your BIOS settings carefully
>> Then try Load Optimized Defaults, check your BIOS settings carefully.
>>
>> If that doesn't work flash back to your previous working version.
>>
>>
>>
> There is al so a useful guide at.
> http://www.biosmods.com/guides/How_to_flash_a_BIOS.php
>
>