|
|
|
|
| Author |
Message |
WackoRay
Guest
|
 Posted: Fri Jul 29, 2005 1:36 am Post subject: Re: G-6 350 mhz upgrade |
 |
|
Thank you Hurricane
Ray
"Hurricane Andrew" <hurricane_andrew@verizon_nospam.net> wrote in message
news:OdeGe.24371$9y3.3171@trnddc06...
| Quote: |
"Vze" <vze2h26h@verizon.net> wrote in message
news:FudGe.2274$QX2.1255@trndny01...
Hi Ben,
I just got the promise card and installed it.
In the instructions it tells me to attach my system
case's 2or 4 pin LED to the LED connector on the
SATA card.
I looked at the spec sheet and it shows my LED
jumper to be a 2 prong just above my on/off cable.
But there is no cable. Do I need it ? I mean, I am
on that pc now and it is running?
thanks
Ray
You only need it if you want pretty lights indicating hard drive activity
to
light up like a Christmas tree whenever there is hard disk access. No,
you
don't need it. If you want to use it, you can use the existing cable that
runs from your hard drive LED connector on the motherboard and move it to
the one on the SATA card.
--
"Hurricane" Andrew
Milford, DE
|
|
|
| Back to top |
|
 |
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
|
|
Vze
Guest
|
| Posted: Thu Aug 04, 2005 11:32 pm Post subject: Re: MEMTEST-86 |
|
|
Ben, Since installing the controller card I have not had any blue screen
errors but what is happening is it gets almost to the desktop and shuts
itself off. Every once in a while on bootup after it shuts itself off I get
windows protection error.
Tech support from powerleap tell me this is a ram problem. The memory I
bought from crucial. I let there scanner scan my system and bought what it
recommended.
Also I re-ran MEMTEST 86 and got errors in test 5 and when it gets to test 8
it freezes the system. I ran it in my e machine T2865 also and got 103
errors in test 6 and when it got to test 8 it froze on that machine also?
Any suggestions?
Thanks
Ray
<ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42e787bb.2376106@nntp.charter.net...
| Quote: | How is the hard drive connected to the system? An older G-6 350MHz
Pentium II
system BIOS does not support a 250GB hard drive. To use the 250GB drive
reliably, you need either an add-in hard drive controller card (e.g.
Promise
brand) or 3rd party drive overlay software such as Western Digital's
EZ-Drive.
In short, 3rd party drive overlay software sucks and you are 1000% better
off
with a drive controller card.
Yes, the 250GB drive is brand new, but what assurance do you have that it
is
100% functional? Run the WD hard drive diagnostics to make sure.
Next, download and run MEMTEST-86, the best (and free) memory diagnostic
software. You have no assurance that the memory upgrade is OK unless you
run
memory diagnostics. If MEMTEST-86 reveals even one error during testing,
the
memory upgrade is not right for the motherboard, which needs DIMMs with
low-density memory chips... Ben Myers
On Wed, 27 Jul 2005 07:10:34 GMT, "WackoRay" <ray_wacko_foti@hotmail.com
wrote:
Since upgrading. Things have gone down hill fast.
It runs fine for a day or two. Then I get file corruption.
The names change to hieroglyphics. I took a snap shot of the
Lavasoft folder but can't post it here for some reason.
Could someone email me so I could send the jpeg image of the folder
so you could look at it and see if you have seen this or know what the
hell is happening. But this happens to all my folders eventually. I just
got lucky and did
a scandisk and it said the files were corrupted beyond repair in
Lavasoft.
I have all up to date anti virus, The Cleaner, Zone Alarm Pro, spybot,
Ad-Aware & spyblaster. Everything comes back clean.
Thanks, my email addy is ray_wacko_foti@hotmail.com
Ray
"Wacko" <wacko_ray_fotiNOSPAM@hotmail.com> wrote in message
news:3fowe.7514$GP6.1931@trndny03...
I kept debating and finally I settled on trying the 1.2 GHz Tualatin
Celeron.
Piece of cake to install.
I added the max memory, up to 384 & replaced that bucket of bolts
Maxtor
10 gig hd with a western digital 250 gig hd.
I like it! Big improvement over what it was like. the difference is
like
night & day.
Well worth the upgrade as far as I am concerned.
"gdp" <gdp416@cox.invalid> wrote in message
news:F6Wfe.39722$_K.5616@fed1read03...
WackoRay wrote:
GenuineIntel Pentium(r) II Processor Intel MMX(TM) Technology
PhoenixBios 4.0 Release 6.0
4M4PBOX1.15A.023.P13
We upgraded 3 of these at work to 1.4 GHz Tualatin Celerons. Made a
big
difference in the apps we run. It was worth it to us, but only you
can
be the judge as to whether it is worth it to you.
|
|
|
| Back to top |
|
|
Ben Myers
Guest
|
| Posted: Fri Aug 05, 2005 12:32 am Post subject: Re: MEMTEST-86 |
|
|
My experiences with MEMTEST-86 have been very positive. If it reveals an error
in testing (or the system hangs), there is something wrong with the hardware,
most often memory.
A G6 350 has a 100MHz front side bus, so it was designed to use PC100 memory
with low density memory chips. Some PC133 memory will work reliably, and some
will not. Low density memory means that there are more chips on the DIMM,
typically 8 for a 64MB DIMM and 16 for a 128MB DIMM.
At this point, I would suspect that the Crucial memory is not right for the
system, despite Crucial's excellent reputation. Just to check, reinstall the
old memory with less capacity in the system and run MEMTEST-86 again. If
MEMTEST-86 runs without showing any errors, then this pretty much confirms that
the Crucial memory is not right... Ben Myers
On Thu, 04 Aug 2005 23:17:59 GMT, "Vze" <vze2h26h@verizon.net> wrote:
| Quote: | Ben, Since installing the controller card I have not had any blue screen
errors but what is happening is it gets almost to the desktop and shuts
itself off. Every once in a while on bootup after it shuts itself off I get
windows protection error.
Tech support from powerleap tell me this is a ram problem. The memory I
bought from crucial. I let there scanner scan my system and bought what it
recommended.
Also I re-ran MEMTEST 86 and got errors in test 5 and when it gets to test 8
it freezes the system. I ran it in my e machine T2865 also and got 103
errors in test 6 and when it got to test 8 it froze on that machine also?
Any suggestions?
Thanks
Ray
ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42e787bb.2376106@nntp.charter.net...
How is the hard drive connected to the system? An older G-6 350MHz
Pentium II
system BIOS does not support a 250GB hard drive. To use the 250GB drive
reliably, you need either an add-in hard drive controller card (e.g.
Promise
brand) or 3rd party drive overlay software such as Western Digital's
EZ-Drive.
In short, 3rd party drive overlay software sucks and you are 1000% better
off
with a drive controller card.
Yes, the 250GB drive is brand new, but what assurance do you have that it
is
100% functional? Run the WD hard drive diagnostics to make sure.
Next, download and run MEMTEST-86, the best (and free) memory diagnostic
software. You have no assurance that the memory upgrade is OK unless you
run
memory diagnostics. If MEMTEST-86 reveals even one error during testing,
the
memory upgrade is not right for the motherboard, which needs DIMMs with
low-density memory chips... Ben Myers
On Wed, 27 Jul 2005 07:10:34 GMT, "WackoRay" <ray_wacko_foti@hotmail.com
wrote:
Since upgrading. Things have gone down hill fast.
It runs fine for a day or two. Then I get file corruption.
The names change to hieroglyphics. I took a snap shot of the
Lavasoft folder but can't post it here for some reason.
Could someone email me so I could send the jpeg image of the folder
so you could look at it and see if you have seen this or know what the
hell is happening. But this happens to all my folders eventually. I just
got lucky and did
a scandisk and it said the files were corrupted beyond repair in
Lavasoft.
I have all up to date anti virus, The Cleaner, Zone Alarm Pro, spybot,
Ad-Aware & spyblaster. Everything comes back clean.
Thanks, my email addy is ray_wacko_foti@hotmail.com
Ray
"Wacko" <wacko_ray_fotiNOSPAM@hotmail.com> wrote in message
news:3fowe.7514$GP6.1931@trndny03...
I kept debating and finally I settled on trying the 1.2 GHz Tualatin
Celeron.
Piece of cake to install.
I added the max memory, up to 384 & replaced that bucket of bolts
Maxtor
10 gig hd with a western digital 250 gig hd.
I like it! Big improvement over what it was like. the difference is
like
night & day.
Well worth the upgrade as far as I am concerned.
"gdp" <gdp416@cox.invalid> wrote in message
news:F6Wfe.39722$_K.5616@fed1read03...
WackoRay wrote:
GenuineIntel Pentium(r) II Processor Intel MMX(TM) Technology
PhoenixBios 4.0 Release 6.0
4M4PBOX1.15A.023.P13
We upgraded 3 of these at work to 1.4 GHz Tualatin Celerons. Made a
big
difference in the apps we run. It was worth it to us, but only you
can
be the judge as to whether it is worth it to you.
|
|
|
| Back to top |
|
|
Vze
Guest
|
| Posted: Fri Aug 05, 2005 4:32 am Post subject: Re: MEMTEST-86 |
|
|
Ben,
I took the crucial card out and tested it again.
All was fine until test # 8 at 2% it freezes the system with the original
memory only.
Any other suggestions? And the crucial memory is pc-100 256 mb synch, cl2
Thanks
Ray
<ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42f2acd6.9831100@nntp.charter.net...
| Quote: | My experiences with MEMTEST-86 have been very positive. If it reveals an
error
in testing (or the system hangs), there is something wrong with the
hardware,
most often memory.
A G6 350 has a 100MHz front side bus, so it was designed to use PC100
memory
with low density memory chips. Some PC133 memory will work reliably, and
some
will not. Low density memory means that there are more chips on the DIMM,
typically 8 for a 64MB DIMM and 16 for a 128MB DIMM.
At this point, I would suspect that the Crucial memory is not right for
the
system, despite Crucial's excellent reputation. Just to check, reinstall
the
old memory with less capacity in the system and run MEMTEST-86 again. If
MEMTEST-86 runs without showing any errors, then this pretty much confirms
that
the Crucial memory is not right... Ben Myers
On Thu, 04 Aug 2005 23:17:59 GMT, "Vze" <vze2h26h@verizon.net> wrote:
Ben, Since installing the controller card I have not had any blue
screen
errors but what is happening is it gets almost to the desktop and shuts
itself off. Every once in a while on bootup after it shuts itself off I
get
windows protection error.
Tech support from powerleap tell me this is a ram problem. The memory I
bought from crucial. I let there scanner scan my system and bought what
it
recommended.
Also I re-ran MEMTEST 86 and got errors in test 5 and when it gets to
test 8
it freezes the system. I ran it in my e machine T2865 also and got 103
errors in test 6 and when it got to test 8 it froze on that machine also?
Any suggestions?
Thanks
Ray
ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42e787bb.2376106@nntp.charter.net...
How is the hard drive connected to the system? An older G-6 350MHz
Pentium II
system BIOS does not support a 250GB hard drive. To use the 250GB
drive
reliably, you need either an add-in hard drive controller card (e.g.
Promise
brand) or 3rd party drive overlay software such as Western Digital's
EZ-Drive.
In short, 3rd party drive overlay software sucks and you are 1000%
better
off
with a drive controller card.
Yes, the 250GB drive is brand new, but what assurance do you have that
it
is
100% functional? Run the WD hard drive diagnostics to make sure.
Next, download and run MEMTEST-86, the best (and free) memory
diagnostic
software. You have no assurance that the memory upgrade is OK unless
you
run
memory diagnostics. If MEMTEST-86 reveals even one error during
testing,
the
memory upgrade is not right for the motherboard, which needs DIMMs with
low-density memory chips... Ben Myers
On Wed, 27 Jul 2005 07:10:34 GMT, "WackoRay"
ray_wacko_foti@hotmail.com
wrote:
Since upgrading. Things have gone down hill fast.
It runs fine for a day or two. Then I get file corruption.
The names change to hieroglyphics. I took a snap shot of the
Lavasoft folder but can't post it here for some reason.
Could someone email me so I could send the jpeg image of the folder
so you could look at it and see if you have seen this or know what the
hell is happening. But this happens to all my folders eventually. I
just
got lucky and did
a scandisk and it said the files were corrupted beyond repair in
Lavasoft.
I have all up to date anti virus, The Cleaner, Zone Alarm Pro, spybot,
Ad-Aware & spyblaster. Everything comes back clean.
Thanks, my email addy is ray_wacko_foti@hotmail.com
Ray
"Wacko" <wacko_ray_fotiNOSPAM@hotmail.com> wrote in message
news:3fowe.7514$GP6.1931@trndny03...
I kept debating and finally I settled on trying the 1.2 GHz Tualatin
Celeron.
Piece of cake to install.
I added the max memory, up to 384 & replaced that bucket of bolts
Maxtor
10 gig hd with a western digital 250 gig hd.
I like it! Big improvement over what it was like. the difference is
like
night & day.
Well worth the upgrade as far as I am concerned.
"gdp" <gdp416@cox.invalid> wrote in message
news:F6Wfe.39722$_K.5616@fed1read03...
WackoRay wrote:
GenuineIntel Pentium(r) II Processor Intel MMX(TM) Technology
PhoenixBios 4.0 Release 6.0
4M4PBOX1.15A.023.P13
We upgraded 3 of these at work to 1.4 GHz Tualatin Celerons. Made
a
big
difference in the apps we run. It was worth it to us, but only
you
can
be the judge as to whether it is worth it to you.
|
|
|
| Back to top |
|
|
Ben Myers
Guest
|
| Posted: Fri Aug 05, 2005 12:32 pm Post subject: Re: MEMTEST-86 |
|
|
There's a reasonable possibility that the motherboard has developed issues. The
MEMTEST lockup and the other BSODs and/or freezes running Windows would seem to
form a pattern indicating hardware problems... Ben
On Fri, 05 Aug 2005 04:27:34 GMT, "Vze" <vze2h26h@verizon.net> wrote:
| Quote: | Ben,
I took the crucial card out and tested it again.
All was fine until test # 8 at 2% it freezes the system with the original
memory only.
Any other suggestions? And the crucial memory is pc-100 256 mb synch, cl2
Thanks
Ray
ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42f2acd6.9831100@nntp.charter.net...
My experiences with MEMTEST-86 have been very positive. If it reveals an
error
in testing (or the system hangs), there is something wrong with the
hardware,
most often memory.
A G6 350 has a 100MHz front side bus, so it was designed to use PC100
memory
with low density memory chips. Some PC133 memory will work reliably, and
some
will not. Low density memory means that there are more chips on the DIMM,
typically 8 for a 64MB DIMM and 16 for a 128MB DIMM.
At this point, I would suspect that the Crucial memory is not right for
the
system, despite Crucial's excellent reputation. Just to check, reinstall
the
old memory with less capacity in the system and run MEMTEST-86 again. If
MEMTEST-86 runs without showing any errors, then this pretty much confirms
that
the Crucial memory is not right... Ben Myers
On Thu, 04 Aug 2005 23:17:59 GMT, "Vze" <vze2h26h@verizon.net> wrote:
Ben, Since installing the controller card I have not had any blue
screen
errors but what is happening is it gets almost to the desktop and shuts
itself off. Every once in a while on bootup after it shuts itself off I
get
windows protection error.
Tech support from powerleap tell me this is a ram problem. The memory I
bought from crucial. I let there scanner scan my system and bought what
it
recommended.
Also I re-ran MEMTEST 86 and got errors in test 5 and when it gets to
test 8
it freezes the system. I ran it in my e machine T2865 also and got 103
errors in test 6 and when it got to test 8 it froze on that machine also?
Any suggestions?
Thanks
Ray
ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42e787bb.2376106@nntp.charter.net...
How is the hard drive connected to the system? An older G-6 350MHz
Pentium II
system BIOS does not support a 250GB hard drive. To use the 250GB
drive
reliably, you need either an add-in hard drive controller card (e.g.
Promise
brand) or 3rd party drive overlay software such as Western Digital's
EZ-Drive.
In short, 3rd party drive overlay software sucks and you are 1000%
better
off
with a drive controller card.
Yes, the 250GB drive is brand new, but what assurance do you have that
it
is
100% functional? Run the WD hard drive diagnostics to make sure.
Next, download and run MEMTEST-86, the best (and free) memory
diagnostic
software. You have no assurance that the memory upgrade is OK unless
you
run
memory diagnostics. If MEMTEST-86 reveals even one error during
testing,
the
memory upgrade is not right for the motherboard, which needs DIMMs with
low-density memory chips... Ben Myers
On Wed, 27 Jul 2005 07:10:34 GMT, "WackoRay"
ray_wacko_foti@hotmail.com
wrote:
Since upgrading. Things have gone down hill fast.
It runs fine for a day or two. Then I get file corruption.
The names change to hieroglyphics. I took a snap shot of the
Lavasoft folder but can't post it here for some reason.
Could someone email me so I could send the jpeg image of the folder
so you could look at it and see if you have seen this or know what the
hell is happening. But this happens to all my folders eventually. I
just
got lucky and did
a scandisk and it said the files were corrupted beyond repair in
Lavasoft.
I have all up to date anti virus, The Cleaner, Zone Alarm Pro, spybot,
Ad-Aware & spyblaster. Everything comes back clean.
Thanks, my email addy is ray_wacko_foti@hotmail.com
Ray
"Wacko" <wacko_ray_fotiNOSPAM@hotmail.com> wrote in message
news:3fowe.7514$GP6.1931@trndny03...
I kept debating and finally I settled on trying the 1.2 GHz Tualatin
Celeron.
Piece of cake to install.
I added the max memory, up to 384 & replaced that bucket of bolts
Maxtor
10 gig hd with a western digital 250 gig hd.
I like it! Big improvement over what it was like. the difference is
like
night & day.
Well worth the upgrade as far as I am concerned.
"gdp" <gdp416@cox.invalid> wrote in message
news:F6Wfe.39722$_K.5616@fed1read03...
WackoRay wrote:
GenuineIntel Pentium(r) II Processor Intel MMX(TM) Technology
PhoenixBios 4.0 Release 6.0
4M4PBOX1.15A.023.P13
We upgraded 3 of these at work to 1.4 GHz Tualatin Celerons. Made
a
big
difference in the apps we run. It was worth it to us, but only
you
can
be the judge as to whether it is worth it to you.
|
|
|
| Back to top |
|
|
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
|
|
Tweek
Guest
|
| Posted: Fri Aug 05, 2005 5:32 pm Post subject: Re: MEMTEST-86 |
|
|
Ben, could his problem be that the motherboard in that G6-350 does not
support 256MB modules even if they are low density? I believe those boards
have three slots and the max is 128MB in each slot. I missed the beginning
of this thread so I don't know if he had been using these modules before
with no problems or not.
<ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42f35658.529722@nntp.charter.net...
| Quote: | There's a reasonable possibility that the motherboard has developed
issues. The
MEMTEST lockup and the other BSODs and/or freezes running Windows would
seem to
form a pattern indicating hardware problems... Ben
On Fri, 05 Aug 2005 04:27:34 GMT, "Vze" <vze2h26h@verizon.net> wrote:
Ben,
I took the crucial card out and tested it again.
All was fine until test # 8 at 2% it freezes the system with the original
memory only.
Any other suggestions? And the crucial memory is pc-100 256 mb synch, cl2
Thanks
Ray
ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42f2acd6.9831100@nntp.charter.net...
My experiences with MEMTEST-86 have been very positive. If it reveals
an
error
in testing (or the system hangs), there is something wrong with the
hardware,
most often memory.
A G6 350 has a 100MHz front side bus, so it was designed to use PC100
memory
with low density memory chips. Some PC133 memory will work reliably,
and
some
will not. Low density memory means that there are more chips on the
DIMM,
typically 8 for a 64MB DIMM and 16 for a 128MB DIMM.
At this point, I would suspect that the Crucial memory is not right for
the
system, despite Crucial's excellent reputation. Just to check,
reinstall
the
old memory with less capacity in the system and run MEMTEST-86 again.
If
MEMTEST-86 runs without showing any errors, then this pretty much
confirms
that
the Crucial memory is not right... Ben Myers
On Thu, 04 Aug 2005 23:17:59 GMT, "Vze" <vze2h26h@verizon.net> wrote:
Ben, Since installing the controller card I have not had any blue
screen
errors but what is happening is it gets almost to the desktop and shuts
itself off. Every once in a while on bootup after it shuts itself off I
get
windows protection error.
Tech support from powerleap tell me this is a ram problem. The memory I
bought from crucial. I let there scanner scan my system and bought what
it
recommended.
Also I re-ran MEMTEST 86 and got errors in test 5 and when it gets to
test 8
it freezes the system. I ran it in my e machine T2865 also and got 103
errors in test 6 and when it got to test 8 it froze on that machine
also?
Any suggestions?
Thanks
Ray
ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42e787bb.2376106@nntp.charter.net...
How is the hard drive connected to the system? An older G-6 350MHz
Pentium II
system BIOS does not support a 250GB hard drive. To use the 250GB
drive
reliably, you need either an add-in hard drive controller card (e.g.
Promise
brand) or 3rd party drive overlay software such as Western Digital's
EZ-Drive.
In short, 3rd party drive overlay software sucks and you are 1000%
better
off
with a drive controller card.
Yes, the 250GB drive is brand new, but what assurance do you have
that
it
is
100% functional? Run the WD hard drive diagnostics to make sure.
Next, download and run MEMTEST-86, the best (and free) memory
diagnostic
software. You have no assurance that the memory upgrade is OK unless
you
run
memory diagnostics. If MEMTEST-86 reveals even one error during
testing,
the
memory upgrade is not right for the motherboard, which needs DIMMs
with
low-density memory chips... Ben Myers
On Wed, 27 Jul 2005 07:10:34 GMT, "WackoRay"
ray_wacko_foti@hotmail.com
wrote:
Since upgrading. Things have gone down hill fast.
It runs fine for a day or two. Then I get file corruption.
The names change to hieroglyphics. I took a snap shot of the
Lavasoft folder but can't post it here for some reason.
Could someone email me so I could send the jpeg image of the folder
so you could look at it and see if you have seen this or know what
the
hell is happening. But this happens to all my folders eventually. I
just
got lucky and did
a scandisk and it said the files were corrupted beyond repair in
Lavasoft.
I have all up to date anti virus, The Cleaner, Zone Alarm Pro,
spybot,
Ad-Aware & spyblaster. Everything comes back clean.
Thanks, my email addy is ray_wacko_foti@hotmail.com
Ray
"Wacko" <wacko_ray_fotiNOSPAM@hotmail.com> wrote in message
news:3fowe.7514$GP6.1931@trndny03...
I kept debating and finally I settled on trying the 1.2 GHz
Tualatin
Celeron.
Piece of cake to install.
I added the max memory, up to 384 & replaced that bucket of bolts
Maxtor
10 gig hd with a western digital 250 gig hd.
I like it! Big improvement over what it was like. the difference
is
like
night & day.
Well worth the upgrade as far as I am concerned.
"gdp" <gdp416@cox.invalid> wrote in message
news:F6Wfe.39722$_K.5616@fed1read03...
WackoRay wrote:
GenuineIntel Pentium(r) II Processor Intel MMX(TM) Technology
PhoenixBios 4.0 Release 6.0
4M4PBOX1.15A.023.P13
We upgraded 3 of these at work to 1.4 GHz Tualatin Celerons.
Made
a
big
difference in the apps we run. It was worth it to us, but only
you
can
be the judge as to whether it is worth it to you.
|
|
|
| Back to top |
|
|
Ben Myers
Guest
|
| Posted: Fri Aug 05, 2005 5:32 pm Post subject: Re: MEMTEST-86 |
|
|
Yes, some of the early 440BX boards do not handle 256MB DIMMs. Later ones do,
sometimes with a BIOS upgrade. This is true for Gateway motherboards and others
as well.
Knowing the exact model of motherboard used by the OP would be helpful. It's
likely to be an early SE440BX, given that the original CPU speed was only
350MHz... Ben Myers
On Fri, 05 Aug 2005 17:16:21 GMT, "Tweek" <shawnwinget@NOSPAMhotmail.com> wrote:
| Quote: | Ben, could his problem be that the motherboard in that G6-350 does not
support 256MB modules even if they are low density? I believe those boards
have three slots and the max is 128MB in each slot. I missed the beginning
of this thread so I don't know if he had been using these modules before
with no problems or not.
ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42f35658.529722@nntp.charter.net...
There's a reasonable possibility that the motherboard has developed
issues. The
MEMTEST lockup and the other BSODs and/or freezes running Windows would
seem to
form a pattern indicating hardware problems... Ben
On Fri, 05 Aug 2005 04:27:34 GMT, "Vze" <vze2h26h@verizon.net> wrote:
Ben,
I took the crucial card out and tested it again.
All was fine until test # 8 at 2% it freezes the system with the original
memory only.
Any other suggestions? And the crucial memory is pc-100 256 mb synch, cl2
Thanks
Ray
ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42f2acd6.9831100@nntp.charter.net...
My experiences with MEMTEST-86 have been very positive. If it reveals
an
error
in testing (or the system hangs), there is something wrong with the
hardware,
most often memory.
A G6 350 has a 100MHz front side bus, so it was designed to use PC100
memory
with low density memory chips. Some PC133 memory will work reliably,
and
some
will not. Low density memory means that there are more chips on the
DIMM,
typically 8 for a 64MB DIMM and 16 for a 128MB DIMM.
At this point, I would suspect that the Crucial memory is not right for
the
system, despite Crucial's excellent reputation. Just to check,
reinstall
the
old memory with less capacity in the system and run MEMTEST-86 again.
If
MEMTEST-86 runs without showing any errors, then this pretty much
confirms
that
the Crucial memory is not right... Ben Myers
On Thu, 04 Aug 2005 23:17:59 GMT, "Vze" <vze2h26h@verizon.net> wrote:
Ben, Since installing the controller card I have not had any blue
screen
errors but what is happening is it gets almost to the desktop and shuts
itself off. Every once in a while on bootup after it shuts itself off I
get
windows protection error.
Tech support from powerleap tell me this is a ram problem. The memory I
bought from crucial. I let there scanner scan my system and bought what
it
recommended.
Also I re-ran MEMTEST 86 and got errors in test 5 and when it gets to
test 8
it freezes the system. I ran it in my e machine T2865 also and got 103
errors in test 6 and when it got to test 8 it froze on that machine
also?
Any suggestions?
Thanks
Ray
ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42e787bb.2376106@nntp.charter.net...
How is the hard drive connected to the system? An older G-6 350MHz
Pentium II
system BIOS does not support a 250GB hard drive. To use the 250GB
drive
reliably, you need either an add-in hard drive controller card (e.g.
Promise
brand) or 3rd party drive overlay software such as Western Digital's
EZ-Drive.
In short, 3rd party drive overlay software sucks and you are 1000%
better
off
with a drive controller card.
Yes, the 250GB drive is brand new, but what assurance do you have
that
it
is
100% functional? Run the WD hard drive diagnostics to make sure.
Next, download and run MEMTEST-86, the best (and free) memory
diagnostic
software. You have no assurance that the memory upgrade is OK unless
you
run
memory diagnostics. If MEMTEST-86 reveals even one error during
testing,
the
memory upgrade is not right for the motherboard, which needs DIMMs
with
low-density memory chips... Ben Myers
On Wed, 27 Jul 2005 07:10:34 GMT, "WackoRay"
ray_wacko_foti@hotmail.com
wrote:
Since upgrading. Things have gone down hill fast.
It runs fine for a day or two. Then I get file corruption.
The names change to hieroglyphics. I took a snap shot of the
Lavasoft folder but can't post it here for some reason.
Could someone email me so I could send the jpeg image of the folder
so you could look at it and see if you have seen this or know what
the
hell is happening. But this happens to all my folders eventually. I
just
got lucky and did
a scandisk and it said the files were corrupted beyond repair in
Lavasoft.
I have all up to date anti virus, The Cleaner, Zone Alarm Pro,
spybot,
Ad-Aware & spyblaster. Everything comes back clean.
Thanks, my email addy is ray_wacko_foti@hotmail.com
Ray
"Wacko" <wacko_ray_fotiNOSPAM@hotmail.com> wrote in message
news:3fowe.7514$GP6.1931@trndny03...
I kept debating and finally I settled on trying the 1.2 GHz
Tualatin
Celeron.
Piece of cake to install.
I added the max memory, up to 384 & replaced that bucket of bolts
Maxtor
10 gig hd with a western digital 250 gig hd.
I like it! Big improvement over what it was like. the difference
is
like
night & day.
Well worth the upgrade as far as I am concerned.
"gdp" <gdp416@cox.invalid> wrote in message
news:F6Wfe.39722$_K.5616@fed1read03...
WackoRay wrote:
GenuineIntel Pentium(r) II Processor Intel MMX(TM) Technology
PhoenixBios 4.0 Release 6.0
4M4PBOX1.15A.023.P13
We upgraded 3 of these at work to 1.4 GHz Tualatin Celerons.
Made
a
big
difference in the apps we run. It was worth it to us, but only
you
can
be the judge as to whether it is worth it to you.
|
|
|
| Back to top |
|
|
WackoRay
Guest
|
| Posted: Mon Aug 08, 2005 12:32 pm Post subject: Re: MEMTEST-86 |
|
|
I took the 128 mb modules out of my other G6 and put them in the one with
the upgrades and the same thing happened. It locks up at test #8 ?
Thanks
Ray
"Tweek" <shawnwinget@NOSPAMhotmail.com> wrote in message
news:F9NIe.98$Y2.4@trnddc09...
| Quote: | Ben, could his problem be that the motherboard in that G6-350 does not
support 256MB modules even if they are low density? I believe those boards
have three slots and the max is 128MB in each slot. I missed the beginning
of this thread so I don't know if he had been using these modules before
with no problems or not.
ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42f35658.529722@nntp.charter.net...
There's a reasonable possibility that the motherboard has developed
issues. The
MEMTEST lockup and the other BSODs and/or freezes running Windows would
seem to
form a pattern indicating hardware problems... Ben
On Fri, 05 Aug 2005 04:27:34 GMT, "Vze" <vze2h26h@verizon.net> wrote:
Ben,
I took the crucial card out and tested it again.
All was fine until test # 8 at 2% it freezes the system with the
original
memory only.
Any other suggestions? And the crucial memory is pc-100 256 mb synch,
cl2
Thanks
Ray
ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42f2acd6.9831100@nntp.charter.net...
My experiences with MEMTEST-86 have been very positive. If it reveals
an
error
in testing (or the system hangs), there is something wrong with the
hardware,
most often memory.
A G6 350 has a 100MHz front side bus, so it was designed to use PC100
memory
with low density memory chips. Some PC133 memory will work reliably,
and
some
will not. Low density memory means that there are more chips on the
DIMM,
typically 8 for a 64MB DIMM and 16 for a 128MB DIMM.
At this point, I would suspect that the Crucial memory is not right
for
the
system, despite Crucial's excellent reputation. Just to check,
reinstall
the
old memory with less capacity in the system and run MEMTEST-86 again.
If
MEMTEST-86 runs without showing any errors, then this pretty much
confirms
that
the Crucial memory is not right... Ben Myers
On Thu, 04 Aug 2005 23:17:59 GMT, "Vze" <vze2h26h@verizon.net> wrote:
Ben, Since installing the controller card I have not had any blue
screen
errors but what is happening is it gets almost to the desktop and
shuts
itself off. Every once in a while on bootup after it shuts itself off
I
get
windows protection error.
Tech support from powerleap tell me this is a ram problem. The memory
I
bought from crucial. I let there scanner scan my system and bought
what
it
recommended.
Also I re-ran MEMTEST 86 and got errors in test 5 and when it gets to
test 8
it freezes the system. I ran it in my e machine T2865 also and got
103
errors in test 6 and when it got to test 8 it froze on that machine
also?
Any suggestions?
Thanks
Ray
ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42e787bb.2376106@nntp.charter.net...
How is the hard drive connected to the system? An older G-6 350MHz
Pentium II
system BIOS does not support a 250GB hard drive. To use the 250GB
drive
reliably, you need either an add-in hard drive controller card
(e.g.
Promise
brand) or 3rd party drive overlay software such as Western
Digital's
EZ-Drive.
In short, 3rd party drive overlay software sucks and you are 1000%
better
off
with a drive controller card.
Yes, the 250GB drive is brand new, but what assurance do you have
that
it
is
100% functional? Run the WD hard drive diagnostics to make sure.
Next, download and run MEMTEST-86, the best (and free) memory
diagnostic
software. You have no assurance that the memory upgrade is OK
unless
you
run
memory diagnostics. If MEMTEST-86 reveals even one error during
testing,
the
memory upgrade is not right for the motherboard, which needs DIMMs
with
low-density memory chips... Ben Myers
On Wed, 27 Jul 2005 07:10:34 GMT, "WackoRay"
ray_wacko_foti@hotmail.com
wrote:
Since upgrading. Things have gone down hill fast.
It runs fine for a day or two. Then I get file corruption.
The names change to hieroglyphics. I took a snap shot of the
Lavasoft folder but can't post it here for some reason.
Could someone email me so I could send the jpeg image of the
folder
so you could look at it and see if you have seen this or know what
the
hell is happening. But this happens to all my folders eventually.
I
just
got lucky and did
a scandisk and it said the files were corrupted beyond repair in
Lavasoft.
I have all up to date anti virus, The Cleaner, Zone Alarm Pro,
spybot,
Ad-Aware & spyblaster. Everything comes back clean.
Thanks, my email addy is ray_wacko_foti@hotmail.com
Ray
"Wacko" <wacko_ray_fotiNOSPAM@hotmail.com> wrote in message
news:3fowe.7514$GP6.1931@trndny03...
I kept debating and finally I settled on trying the 1.2 GHz
Tualatin
Celeron.
Piece of cake to install.
I added the max memory, up to 384 & replaced that bucket of
bolts
Maxtor
10 gig hd with a western digital 250 gig hd.
I like it! Big improvement over what it was like. the
difference
is
like
night & day.
Well worth the upgrade as far as I am concerned.
"gdp" <gdp416@cox.invalid> wrote in message
news:F6Wfe.39722$_K.5616@fed1read03...
WackoRay wrote:
GenuineIntel Pentium(r) II Processor Intel MMX(TM)
Technology
PhoenixBios 4.0 Release 6.0
4M4PBOX1.15A.023.P13
We upgraded 3 of these at work to 1.4 GHz Tualatin Celerons.
Made
a
big
difference in the apps we run. It was worth it to us, but
only
you
can
be the judge as to whether it is worth it to you.
|
|
|
| Back to top |
|
|
WackoRay
Guest
|
| Posted: Wed Aug 10, 2005 5:32 am Post subject: Re: MEMTEST-86 |
|
|
Ben these are from belarc advisor and the bottom from Ispecs
Board: Intel Corporation MP440BX AA698435-301
Serial Number: IMMP82801837
BIOS: Intel Corp. 4M4PB0X1.15A.0029.P17 08/04/199
****************************************************
Manufacturer : Intel Corporation
Model : MP440BX Rev. AA698435-301
CPU Slot/Socket Type : Socket 370 FC-PGA2
Chipset Vendor : Intel i440BX/ZX Rev. B1
Bios Manufacturer : Intel Corp.
Bios Version : 4M4PB0X1.15A.0029.P17
<ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42f3a0bc.19576393@nntp.charter.net...
| Quote: | Yes, some of the early 440BX boards do not handle 256MB DIMMs. Later ones
do,
sometimes with a BIOS upgrade. This is true for Gateway motherboards and
others
as well.
Knowing the exact model of motherboard used by the OP would be helpful.
It's
likely to be an early SE440BX, given that the original CPU speed was only
350MHz... Ben Myers
On Fri, 05 Aug 2005 17:16:21 GMT, "Tweek" <shawnwinget@NOSPAMhotmail.com
wrote:
Ben, could his problem be that the motherboard in that G6-350 does not
support 256MB modules even if they are low density? I believe those
boards
have three slots and the max is 128MB in each slot. I missed the
beginning
of this thread so I don't know if he had been using these modules before
with no problems or not.
ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42f35658.529722@nntp.charter.net...
There's a reasonable possibility that the motherboard has developed
issues. The
MEMTEST lockup and the other BSODs and/or freezes running Windows would
seem to
form a pattern indicating hardware problems... Ben
On Fri, 05 Aug 2005 04:27:34 GMT, "Vze" <vze2h26h@verizon.net> wrote:
Ben,
I took the crucial card out and tested it again.
All was fine until test # 8 at 2% it freezes the system with the
original
memory only.
Any other suggestions? And the crucial memory is pc-100 256 mb synch,
cl2
Thanks
Ray
ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42f2acd6.9831100@nntp.charter.net...
My experiences with MEMTEST-86 have been very positive. If it
reveals
an
error
in testing (or the system hangs), there is something wrong with the
hardware,
most often memory.
A G6 350 has a 100MHz front side bus, so it was designed to use PC100
memory
with low density memory chips. Some PC133 memory will work reliably,
and
some
will not. Low density memory means that there are more chips on the
DIMM,
typically 8 for a 64MB DIMM and 16 for a 128MB DIMM.
At this point, I would suspect that the Crucial memory is not right
for
the
system, despite Crucial's excellent reputation. Just to check,
reinstall
the
old memory with less capacity in the system and run MEMTEST-86 again.
If
MEMTEST-86 runs without showing any errors, then this pretty much
confirms
that
the Crucial memory is not right... Ben Myers
On Thu, 04 Aug 2005 23:17:59 GMT, "Vze" <vze2h26h@verizon.net> wrote:
Ben, Since installing the controller card I have not had any blue
screen
errors but what is happening is it gets almost to the desktop and
shuts
itself off. Every once in a while on bootup after it shuts itself
off I
get
windows protection error.
Tech support from powerleap tell me this is a ram problem. The
memory I
bought from crucial. I let there scanner scan my system and bought
what
it
recommended.
Also I re-ran MEMTEST 86 and got errors in test 5 and when it gets
to
test 8
it freezes the system. I ran it in my e machine T2865 also and got
103
errors in test 6 and when it got to test 8 it froze on that machine
also?
Any suggestions?
Thanks
Ray
ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42e787bb.2376106@nntp.charter.net...
How is the hard drive connected to the system? An older G-6
350MHz
Pentium II
system BIOS does not support a 250GB hard drive. To use the 250GB
drive
reliably, you need either an add-in hard drive controller card
(e.g.
Promise
brand) or 3rd party drive overlay software such as Western
Digital's
EZ-Drive.
In short, 3rd party drive overlay software sucks and you are
1000%
better
off
with a drive controller card.
Yes, the 250GB drive is brand new, but what assurance do you have
that
it
is
100% functional? Run the WD hard drive diagnostics to make sure.
Next, download and run MEMTEST-86, the best (and free) memory
diagnostic
software. You have no assurance that the memory upgrade is OK
unless
you
run
memory diagnostics. If MEMTEST-86 reveals even one error during
testing,
the
memory upgrade is not right for the motherboard, which needs DIMMs
with
low-density memory chips... Ben Myers
On Wed, 27 Jul 2005 07:10:34 GMT, "WackoRay"
ray_wacko_foti@hotmail.com
wrote:
Since upgrading. Things have gone down hill fast.
It runs fine for a day or two. Then I get file corruption.
The names change to hieroglyphics. I took a snap shot of the
Lavasoft folder but can't post it here for some reason.
Could someone email me so I could send the jpeg image of the
folder
so you could look at it and see if you have seen this or know
what
the
hell is happening. But this happens to all my folders
eventually. I
just
got lucky and did
a scandisk and it said the files were corrupted beyond repair in
Lavasoft.
I have all up to date anti virus, The Cleaner, Zone Alarm Pro,
spybot,
Ad-Aware & spyblaster. Everything comes back clean.
Thanks, my email addy is ray_wacko_foti@hotmail.com
Ray
"Wacko" <wacko_ray_fotiNOSPAM@hotmail.com> wrote in message
news:3fowe.7514$GP6.1931@trndny03...
I kept debating and finally I settled on trying the 1.2 GHz
Tualatin
Celeron.
Piece of cake to install.
I added the max memory, up to 384 & replaced that bucket of
bolts
Maxtor
10 gig hd with a western digital 250 gig hd.
I like it! Big improvement over what it was like. the
difference
is
like
night & day.
Well worth the upgrade as far as I am concerned.
"gdp" <gdp416@cox.invalid> wrote in message
news:F6Wfe.39722$_K.5616@fed1read03...
WackoRay wrote:
GenuineIntel Pentium(r) II Processor Intel MMX(TM)
Technology
PhoenixBios 4.0 Release 6.0
4M4PBOX1.15A.023.P13
We upgraded 3 of these at work to 1.4 GHz Tualatin Celerons.
Made
a
big
difference in the apps we run. It was worth it to us, but
only
you
can
be the judge as to whether it is worth it to you.
|
|
|
| Back to top |
|
|
Ben Myers
Guest
|
| Posted: Wed Aug 10, 2005 5:32 pm Post subject: Re: MEMTEST-86 |
|
|
The MP440BX is an OEM variation of the very popular SE440BX Intel board. Ispecs
is inaccurate. This is a Slot 1 board, not Socket 370. However, Ispecs is
being fooled by the PowerLeap kit CPU, which identifies itself as it truly is:
Socket 370 FC-PGA2.
IMHO, the same limitations hold for the MP440BX as for the SE440BX board. In
other words, installed memory must consist of DIMMs with low-density chips.
All I can surmise is that either the PowerLeap kit is not compatible with the
MP440BX board, or that a defect has crept into the hardware somewhere. The
system lockups running both Windows and MEMTEST-86 are not a coincidence, and
are symptomatic of a hardware problem.
What happens when you put the older slower Slot 1 CPU in the system? Lockups?
Does MEMTEST run OK? ... Ben Myers
On Wed, 10 Aug 2005 05:29:09 GMT, "WackoRay" <ray_wacko_foti@hotmail.com> wrote:
| Quote: | Ben these are from belarc advisor and the bottom from Ispecs
Board: Intel Corporation MP440BX AA698435-301
Serial Number: IMMP82801837
BIOS: Intel Corp. 4M4PB0X1.15A.0029.P17 08/04/199
****************************************************
Manufacturer : Intel Corporation
Model : MP440BX Rev. AA698435-301
CPU Slot/Socket Type : Socket 370 FC-PGA2
Chipset Vendor : Intel i440BX/ZX Rev. B1
Bios Manufacturer : Intel Corp.
Bios Version : 4M4PB0X1.15A.0029.P17
BIG SNIP |
|
|
| Back to top |
|
|
|
|
Kevin Childers
Guest
|
| Posted: Fri Aug 12, 2005 3:34 pm Post subject: Re: MEMTEST-86 |
|
|
Just to pass on a confirmation of Ben's comments. Checked with the best
tech I know and he concurs the MP440BX is limited to low density (high chip
count) DIMMs.
KC
<ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:42fa2f26.18778568@nntp.charter.net...
| Quote: | The MP440BX is an OEM variation of the very popular SE440BX Intel board.
Ispecs
is inaccurate. This is a Slot 1 board, not Socket 370. However, Ispecs
is
being fooled by the PowerLeap kit CPU, which identifies itself as it truly
is:
Socket 370 FC-PGA2.
IMHO, the same limitations hold for the MP440BX as for the SE440BX board.
In
other words, installed memory must consist of DIMMs with low-density
chips.
All I can surmise is that either the PowerLeap kit is not compatible with
the
MP440BX board, or that a defect has crept into the hardware somewhere.
The
system lockups running both Windows and MEMTEST-86 are not a coincidence,
and
are symptomatic of a hardware problem.
What happens when you put the older slower Slot 1 CPU in the system?
Lockups?
Does MEMTEST run OK? ... Ben Myers
On Wed, 10 Aug 2005 05:29:09 GMT, "WackoRay" <ray_wacko_foti@hotmail.com
wrote:
Ben these are from belarc advisor and the bottom from Ispecs
Board: Intel Corporation MP440BX AA698435-301
Serial Number: IMMP82801837
BIOS: Intel Corp. 4M4PB0X1.15A.0029.P17 08/04/199
****************************************************
Manufacturer : Intel Corporation
Model : MP440BX Rev. AA698435-301
CPU Slot/Socket Type : Socket 370 FC-PGA2
Chipset Vendor : Intel i440BX/ZX Rev. B1
Bios Manufacturer : Intel Corp.
Bios Version : 4M4PB0X1.15A.0029.P17
BIG SNIP |
|
|
| Back to top |
|
|
|
|
| |
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups