HowToFixComputers.com




Watched TopicsWatched Topics SearchSearch RegisterRegister Log in to check your private messagesLog in to check your private messages ProfileProfile Log inLog in
Problems with Tyan 2721-533

 
Post new topic   Reply to topic    Index -> Tyan
Author Message
Stefan Nielsen
Guest
PostPosted: Tue Oct 19, 2004 11:04 pm    Post subject: Problems with Tyan 2721-533 Reply with quote
Hi,

I'm experiencing big troubles with the following configuration:

Motherboard: Tyan 2721-533
http://www.tyan.com/products/html/thunderi7501pro.html
Chassis: 1U ChenbroRM11704
http://www.chenbro.com.tw/product/product.jsp?p=3&s=301&pid=77
Riser: M2037R**(Riser) ftp://ftp.tyan.com/matrix/matrix_riser.pdf
SCSI Controller: Adaptec 2010S Zero Channel
http://www.adaptec.com/worldwide/product/proddetail.html?sess=no&language=English+US&prodkey=ASR-2010S&cat=%2fTechnology%2fRAID%2fUltra320
CPU: Xeon 2.4Ghz
Ram: 1GB DDR 2100 ECC
OS: Windows 2003 Server Std.

I'm not able to install Windows 2003 Server Std. with the riser in the
above configuration. I do an install without the riser and when the
install finishes i put the riser back again. When Windows boot up it
just hangs at the login prompt. On some systems the installation has
worked for mysterious reasons. It has something to do with the Plug
And Play service since two Adaptec SCSI Controllers are detected on
systems that worked, when these are detected and now installed the
system is working fine. Help would be much appreciated.

//Stefan
Back to top
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
Display posts from previous:   
Post new topic   Reply to topic    Index -> Tyan All times are GMT
Page 1 of 1

 

 MemberlistMemberlist  UsergroupsUsergroups


Powered by p|-|pBB

Featured Sites: DIY Projects