|
|
|
|
| Author |
Message |
Opticreep
Guest
|
 Posted: Sat Aug 14, 2004 12:14 am Post subject: .13 microns... huh?!? |
 |
|
I apologize for such a newbie-ish question, but...
I'm trying to figure out if my ECS K7VTA3 (v3.1a) motherboard could
support an Athlon XP 2400 processor. So I went to the ECS website.
In the CPU chart, it said that the motherboard could support up to
2100+ at "133MHz", or 2400+ at "133MHz (.13 microns)".
What does that mean?
I remember trying to put my brother's Athlon 2400 XP CPU on this same
motherboard about 6 months ago. Bios was 3.0d. As I recall, during
the boot-up sequence the computer reported the CPU as only 2000 MHz.
I simply assumed the motherboard was not capable of supporting 2400
MHz. But the chart from the ECS website I mentioned makes me wonder:
http://www.ecsusa.com/support/table_amd.html
Anyway, I'd appreciate it if someone would clarify this for me. |
|
| Back to top |
|
 |
|
|
Buffalo
Guest
|
| Posted: Sat Aug 14, 2004 5:06 am Post subject: Re: .13 microns... huh?!? |
|
|
I think a 2400 runs at around 2GHz (2000MHz). None of the xp's run as
fast as their number indicates.It is a marketing thing to compare it
to an equivilent Intel cpu, I believe.
Example, my 2100 xp runs around 1730 MHz or 1.73 GHz.
Your motherboard will support any XP that runs on a 133MHz bus. (a 266
MHz cpu runs on a 133MHz bus).
Than includes an XP2600+ (266MHz) model.
"Opticreep" <opticreep@yahoo.com> wrote in message
news:9e1f277e.0408131508.48dc4b9c@posting.google.com...
| Quote: | I apologize for such a newbie-ish question, but...
I'm trying to figure out if my ECS K7VTA3 (v3.1a) motherboard could
support an Athlon XP 2400 processor. So I went to the ECS website.
In the CPU chart, it said that the motherboard could support up to
2100+ at "133MHz", or 2400+ at "133MHz (.13 microns)".
What does that mean?
I remember trying to put my brother's Athlon 2400 XP CPU on this
same
motherboard about 6 months ago. Bios was 3.0d. As I recall, during
the boot-up sequence the computer reported the CPU as only 2000 MHz.
I simply assumed the motherboard was not capable of supporting 2400
MHz. But the chart from the ECS website I mentioned makes me
wonder:
http://www.ecsusa.com/support/table_amd.html
Anyway, I'd appreciate it if someone would clarify this for me. |
|
|
| Back to top |
|
|
kirbalo
Guest
|
| Posted: Sat Aug 14, 2004 4:07 pm Post subject: Re: .13 microns... huh?!? |
|
|
Opticreep wrote:
| Quote: | I apologize for such a newbie-ish question, but...
I'm trying to figure out if my ECS K7VTA3 (v3.1a) motherboard could
support an Athlon XP 2400 processor. So I went to the ECS website.
In the CPU chart, it said that the motherboard could support up to
2100+ at "133MHz", or 2400+ at "133MHz (.13 microns)".
What does that mean?
I remember trying to put my brother's Athlon 2400 XP CPU on this same
motherboard about 6 months ago. Bios was 3.0d. As I recall, during
the boot-up sequence the computer reported the CPU as only 2000 MHz.
I simply assumed the motherboard was not capable of supporting 2400
MHz. But the chart from the ECS website I mentioned makes me wonder:
http://www.ecsusa.com/support/table_amd.html
Anyway, I'd appreciate it if someone would clarify this for me.
|
Along with what Buffalo said...
Just about everything available through retail and the web from AMD is based
on the .13u (micrometers) design rules. i.e. .13 micron. It's just telling
you that the board supports the "new" chips.
--
Kirbalo...
K7S5A Pro, Athlon XP 1600+
1 Gig DDR, 120 GB, nVidia GeForce 4 MX 440
SuSE Linux 9.0 Pro & XP Pro Dual Boot
Linux 2.4.21-243-athlon
10:11am up 13:11, 3 users, load average: 1.07, 1.05, 1.05 |
|
| Back to top |
|
|
|
|
| |
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups