Posted: Sun Aug 01, 2004 1:08 am Post subject: K7VTA3 Motherboard Question
K7VTA3 Version 6
I have an AMD XP2800 installed in the board.
It should work but unable to get up to speed with it.
I can get all other speeds using the jumpers except the 166Mhz ones.
JP2 2-3, JP3 2-3
Any time I adjust the MB jumpers for 166mhz it freezes.
Anyone else has a 2800 up to speed.
Posted: Sun Aug 01, 2004 6:08 am Post subject: Re: K7VTA3 Motherboard Question
What about the memory ?
Is it rated for 166mhz ?
Might also try clearing the bios
"John" <iggy2@pacbell.net> wrote in message
news:auWOc.102448$Ay.5703@newssvr29.news.prodigy.com...
Quote:
K7VTA3 Version 6
I have an AMD XP2800 installed in the board.
It should work but unable to get up to speed with it.
I can get all other speeds using the jumpers except the 166Mhz ones.
JP2 2-3, JP3 2-3
Any time I adjust the MB jumpers for 166mhz it freezes.
Anyone else has a 2800 up to speed.
Posted: Sun Aug 01, 2004 2:04 pm Post subject: Re: K7VTA3 Motherboard Question
Had a bad DDR memory stick that was causing the problem. Replaced and I'm
now upto 2800 Mhz.
Thanks
"Tod" <no_spam_me@comcast.net> wrote in message
news:bC%Oc.206369$JR4.156267@attbi_s54...
Quote:
What about the memory ?
Is it rated for 166mhz ?
Might also try clearing the bios
"John" <iggy2@pacbell.net> wrote in message
news:auWOc.102448$Ay.5703@newssvr29.news.prodigy.com...
K7VTA3 Version 6
I have an AMD XP2800 installed in the board.
It should work but unable to get up to speed with it.
I can get all other speeds using the jumpers except the 166Mhz ones.
JP2 2-3, JP3 2-3
Any time I adjust the MB jumpers for 166mhz it freezes.
Anyone else has a 2800 up to speed.
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups