|
|
| Author |
Message |
Jess Fertudei
Guest
|
 Posted: Tue Jun 29, 2004 4:11 am Post subject: Jumper for DDR? |
 |
|
k7s5a v. 3.1
Is there a jumper that needs changed when changing from SDRAM to DDR?
I cannot get the board to run without severe file corruptions and freezes
and such, even at 100/100, after swithching from 384M 133SDRAM (that was
rock solid) to Avant Technology 512M 333DDR 64X64 clk2.5.
I did go into BIOS and adjust what I could see... but was there a jumper or
something I missed? I really want to run this with my Duron 1.3 for a while
before bumping to an XP 2400. If it's not going to happen I need to order
another board *now*.
Thanks |
|
| Back to top |
|
 |
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
|
|
Tod
Guest
|
| Posted: Tue Jun 29, 2004 5:16 am Post subject: Re: Jumper for DDR? |
|
|
You might try clearing the whole bios.
Remove the powercord and the JP1 (?) jumper, to clear bios.
"Jess Fertudei" <not@this.juncture.com> wrote in message
news:oLadnfeFv9PXdX3dRVn-gQ@giganews.com...
| Quote: | k7s5a v. 3.1
Is there a jumper that needs changed when changing from SDRAM to DDR?
I cannot get the board to run without severe file corruptions and freezes
and such, even at 100/100, after swithching from 384M 133SDRAM (that was
rock solid) to Avant Technology 512M 333DDR 64X64 clk2.5.
I did go into BIOS and adjust what I could see... but was there a jumper
or
something I missed? I really want to run this with my Duron 1.3 for a
while
before bumping to an XP 2400. If it's not going to happen I need to order
another board *now*.
Thanks
|
|
|
| Back to top |
|
|
Tech Support Guy
Guest
|
| Posted: Thu Jul 15, 2004 12:00 am Post subject: Re: Jumper for DDR? |
|
|
Yeah reset the board and then double check your CPU is showing up correct
and that your bus/speed settings are correct. If you have two sticks, try
one at a time.
Hope this helps.
The Tech Support Guy
www.ComputerRelative.com
"Jess Fertudei" <not@this.juncture.com> wrote in message
news:oLadnfeFv9PXdX3dRVn-gQ@giganews.com...
| Quote: | k7s5a v. 3.1
Is there a jumper that needs changed when changing from SDRAM to DDR?
I cannot get the board to run without severe file corruptions and freezes
and such, even at 100/100, after swithching from 384M 133SDRAM (that was
rock solid) to Avant Technology 512M 333DDR 64X64 clk2.5.
I did go into BIOS and adjust what I could see... but was there a jumper
or
something I missed? I really want to run this with my Duron 1.3 for a
while
before bumping to an XP 2400. If it's not going to happen I need to order
another board *now*.
Thanks
|
|
|
| Back to top |
|
|
|
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups