HowToFixComputers.com




Watched TopicsWatched Topics SearchSearch RegisterRegister Log in to check your private messagesLog in to check your private messages ProfileProfile Log inLog in
Precott in 8KNXP (rev1.0)

 
Post new topic   Reply to topic    Index -> Gigabyte
Author Message
Al Combs
Guest





PostPosted: Sun Jun 13, 2004 10:29 pm    Post subject: Precott in 8KNXP (rev1.0) Reply with quote

Does anyone know if a 3.0 gig Prescott will work in an 8KNXP (rev1.0)
with an F10 bios update?

Thanks,
Al Combs
Back to top
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
Tim
Guest





PostPosted: Mon Jun 14, 2004 2:17 am    Post subject: Re: Precott in 8KNXP (rev1.0) Reply with quote

Hi,

See:
http://www.giga-byte.com/Motherboard/Support/CPUSupportList/CPUSupportList_List.htm

It says Yes for bios F10 if I read it correctly.

However I don't know anyone running a prescott on an 8knxp rev 1.0 - most
people I know are avoiding prescott CPU's. My advice FWIW is get a 3.0c
chip - they run cooler and just as fast. Shop around till you find one if
this bothers you. The alternative may be that you find your CPU idle temp is
50c instead of 40c or less.


- Tim



"Al Combs" <nospam@frontiernet.net> wrote in message
news:3k3pc05m16ejg2kchbpm228khqqunj2sbn@4ax.com...
Quote:
Does anyone know if a 3.0 gig Prescott will work in an 8KNXP (rev1.0)
with an F10 bios update?

Thanks,
Al Combs
Back to top
McGrandpa
Guest





PostPosted: Mon Jun 14, 2004 5:00 am    Post subject: Re: Precott in 8KNXP (rev1.0) Reply with quote

Tim wrote:
Quote:
Hi,

See:

http://www.giga-byte.com/Motherboard/Support/CPUSupportList/CPUSupportLi

st_List.htm
Quote:

It says Yes for bios F10 if I read it correctly.

However I don't know anyone running a prescott on an 8knxp rev 1.0 -
most people I know are avoiding prescott CPU's. My advice FWIW is get
a 3.0c chip - they run cooler and just as fast. Shop around till you
find one if this bothers you. The alternative may be that you find
your CPU idle temp is 50c instead of 40c or less.


- Tim

P4-3.0E/800/1m (Prescott, .09u) right now, 40C/104F, watching a movie,
42C/108F, playing Far Cry 46-47C/112-119F CPU Core=1.40v

And I might try to swap this back for the Northwood, 3.00/800/512k, same
price.
McG.

Quote:



"Al Combs" <nospam@frontiernet.net> wrote in message
news:3k3pc05m16ejg2kchbpm228khqqunj2sbn@4ax.com...
Does anyone know if a 3.0 gig Prescott will work in an 8KNXP (rev1.0)
with an F10 bios update?

Thanks,
Al Combs
Back to top
Al Combs
Guest





PostPosted: Mon Jun 14, 2004 8:08 am    Post subject: Re: Precott in 8KNXP (rev1.0) Reply with quote

Thanks for the info.

Al Combs

On Mon, 14 Jun 2004 09:17:01 +1200, "Tim" <Tim@NoSpam.com> wrote:

Quote:
Hi,

See:
http://www.giga-byte.com/Motherboard/Support/CPUSupportList/CPUSupportList_List.htm

It says Yes for bios F10 if I read it correctly.

However I don't know anyone running a prescott on an 8knxp rev 1.0 - most
people I know are avoiding prescott CPU's. My advice FWIW is get a 3.0c
chip - they run cooler and just as fast. Shop around till you find one if
this bothers you. The alternative may be that you find your CPU idle temp is
50c instead of 40c or less.


- Tim



"Al Combs" <nospam@frontiernet.net> wrote in message
news:3k3pc05m16ejg2kchbpm228khqqunj2sbn@4ax.com...
Does anyone know if a 3.0 gig Prescott will work in an 8KNXP (rev1.0)
with an F10 bios update?

Thanks,
Al Combs
Back to top
Tim
Guest





PostPosted: Mon Jun 14, 2004 9:09 am    Post subject: Re: Precott in 8KNXP (rev1.0) Reply with quote

If your ambient is at or near 20C then I would leave temps like that alone.
Stick with it thats a good setup if the 40C is real.
- Tim

"McGrandpa" <McGrandpaNOT@NOThotmail.com> wrote in message
news:GU5zc.12217$ar2.1429@fe2.texas.rr.com...
Quote:
Tim wrote:
Hi,

See:

http://www.giga-byte.com/Motherboard/Support/CPUSupportList/CPUSupportLi
st_List.htm

It says Yes for bios F10 if I read it correctly.

However I don't know anyone running a prescott on an 8knxp rev 1.0 -
most people I know are avoiding prescott CPU's. My advice FWIW is get
a 3.0c chip - they run cooler and just as fast. Shop around till you
find one if this bothers you. The alternative may be that you find
your CPU idle temp is 50c instead of 40c or less.


- Tim

P4-3.0E/800/1m (Prescott, .09u) right now, 40C/104F, watching a movie,
42C/108F, playing Far Cry 46-47C/112-119F CPU Core=1.40v

And I might try to swap this back for the Northwood, 3.00/800/512k, same
price.
McG.




"Al Combs" <nospam@frontiernet.net> wrote in message
news:3k3pc05m16ejg2kchbpm228khqqunj2sbn@4ax.com...
Does anyone know if a 3.0 gig Prescott will work in an 8KNXP (rev1.0)
with an F10 bios update?

Thanks,
Al Combs

Back to top
Display posts from previous:   
Post new topic   Reply to topic    Index -> Gigabyte All times are GMT
Page 1 of 1

 

 MemberlistMemberlist  UsergroupsUsergroups



Powered by p|-|pBB

Featured Sites: DIY Projects