HowToFixComputers.com

Piotr Kroñ · Guest

Hello

When i turn on my computer everything is ok, but when i turn it off and
after 2-3 minutes turn on. It didn't start I must wait 5 minutes when it
start. I don't know what is it? This is my second mainboard on first was
the same problem.

Epox Tech, Can you help? and everyone.

P.S Maby my ac adapter is weak 300 wat Codegen

[ Kamilo23 | Epox 8rda+ nforce 2 spp + AMD ATHLON 2000xp+ 256/333 mb
ram ]
[ CTX 705 + GF FX 5200 128MB 128 bit ]
[ CD-RW LG HL-DT-ST GCE 8481B 48/24/48X CD-ROM LG CRD 8521B 52X]
[ Seagate ST340823A 40GB|Skaner Be@Paw 2400 TA plus I Zasilacz Codegen
300Wat[gg 4076540]]

Doug & Raye Lynn · Guest

Hi, 300W supply for athlon xp with fx 5200 is marginal at best. When you get
powered up, check your 5VDC, 3.3VDC and core voltage, they should be within
5% of nominal value. (5VDC should be 5V +_ .25VDC, etc) The Fx 5200 requires
a 300W supply minimum. If its a 12V P4 rated, certified 2.03, it might work,
otherwise upgrade it to 340W or higher, 400W preferred. You could also have
bad power capacitors, check for leaking or bulging tops or bottoms, and have
them replaced under warranty at Epox.

doug
www.lynncomp.com
Epox direct reseller

"Piotr Kron" <kamilo23@tlen.pl> wrote in message
news:c9smt5$jj6$1@nemesis.news.tpi.pl...