|
|
|
|
| Author |
Message |
John
Guest
|
 Posted: Mon Jun 07, 2004 11:53 pm Post subject: USB 2.0 ON AN L7S7A2 with WIN98FE |
 |
|
hi guys
put a new board in as above, works fine put on checking the usb properties
it does not show enhanced, been to usbman but only mentions 95 or me/xp
..should i remove the drivers and try to reinstall the sis ones?as my setup
disk for the board does not play properly so got the drivers of the ecs
site.TIA John
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.699 / Virus Database: 456 - Release Date: 6/4/04 |
|
| Back to top |
|
 |
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
|
|
Rotes Sapiens
Guest
|
| Posted: Sun Jun 13, 2004 5:06 am Post subject: Re: USB 2.0 ON AN L7S7A2 with WIN98FE |
|
|
On Mon, 7 Jun 2004 19:53:11 +0100, "John" <j.brown31not hereno
spam@ntlworld.com> wrote:
| Quote: | put a new board in as above, works fine put on checking the usb properties
it does not show enhanced, been to usbman but only mentions 95 or me/xp
.should i remove the drivers and try to reinstall the sis ones?as my setup
disk for the board does not play properly so got the drivers of the ecs
site.TIA John
|
Anything on the mb should use the drivers on the CD or supplied by ECS
for that mb. Windows won't recognise it properly. The only exception
in my experience is the hard disk or IDE drivers. Don't use the
drivers on the CD or supplied by ECS, let Windows recognise the IDE
controller. Otherwise the computer runs really slowly.
Sig:
I have a brain the size of a planet. It's not much good to me, however. It's on a different planet. |
|
| Back to top |
|
|
John
Guest
|
| Posted: Sun Jun 13, 2004 11:06 am Post subject: Re: USB 2.0 ON AN L7S7A2 with WIN98FE |
|
|
thxs for ur help,however i have tried most things ,but my system will not
pick up the drivers of the cd i think the cd is corrupted have looked on the
site and e-mailed ecs but no joy,why bring out a board that supports usb 2.0
but no support for it!!!!
thxs again
john
"Rotes Sapiens" <rs@redplanet.mars.org.cy> wrote in message
news:7kcnc0tgo5r2j247d2ej2f0rtr87i46d5d@4ax.com...
| Quote: | On Mon, 7 Jun 2004 19:53:11 +0100, "John" <j.brown31not hereno
spam@ntlworld.com> wrote:
put a new board in as above, works fine put on checking the usb
properties
it does not show enhanced, been to usbman but only mentions 95 or me/xp
.should i remove the drivers and try to reinstall the sis ones?as my
setup
disk for the board does not play properly so got the drivers of the ecs
site.TIA John
Anything on the mb should use the drivers on the CD or supplied by ECS
for that mb. Windows won't recognise it properly. The only exception
in my experience is the hard disk or IDE drivers. Don't use the
drivers on the CD or supplied by ECS, let Windows recognise the IDE
controller. Otherwise the computer runs really slowly.
Sig:
I have a brain the size of a planet. It's not much good to me, however.
It's on a different planet. |
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.704 / Virus Database: 460 - Release Date: 6/12/2004 |
|
| Back to top |
|
|
Sim Young
Guest
|
| Posted: Sun Jun 13, 2004 12:05 pm Post subject: Re: USB 2.0 ON AN L7S7A2 with WIN98FE |
|
|
John,
I don't think you will find USB2.0 motherboard support for Win98FE or
SE. I have the same board and there are no USB2.0 drivers available.
Only for ME/2000/XP. Very few motherboard makers have support for
Win98FE or even SE. Must be a gimick to get you to upgrade. Most USB2.0
devices are backwards compatible to USB1.1 anyway.
John wrote:
| Quote: | hi guys
put a new board in as above, works fine put on checking the usb properties
it does not show enhanced, been to usbman but only mentions 95 or me/xp
.should i remove the drivers and try to reinstall the sis ones?as my setup
disk for the board does not play properly so got the drivers of the ecs
site.TIA John
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.699 / Virus Database: 456 - Release Date: 6/4/04
|
|
|
| Back to top |
|
|
Rotes Sapiens
Guest
|
| Posted: Mon Jun 14, 2004 6:06 am Post subject: Re: USB 2.0 ON AN L7S7A2 with WIN98FE |
|
|
On Sun, 13 Jun 2004 11:52:50 GMT, Sim Young <sim2sim@ix.netcom.com>
wrote:
Also in most computers the USB ports on the front of the computer are
USB 1.1. The ones on the back are USB 2.0. So if he needs to use the
USB ports on the front of the computer, he might not get USB 2.0 speed
anyway.
| Quote: | I don't think you will find USB2.0 motherboard support for Win98FE or
SE. I have the same board and there are no USB2.0 drivers available.
Only for ME/2000/XP. Very few motherboard makers have support for
Win98FE or even SE. Must be a gimick to get you to upgrade. Most USB2.0
devices are backwards compatible to USB1.1 anyway.
put a new board in as above, works fine put on checking the usb properties
it does not show enhanced, been to usbman but only mentions 95 or me/xp
.should i remove the drivers and try to reinstall the sis ones?as my setup
disk for the board does not play properly so got the drivers of the ecs
site.TIA John
|
Sig:
I have a brain the size of a planet. It's not much good to me, however. It's on a different planet. |
|
| Back to top |
|
|
|
|
|
|
| |
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups