HowToFixComputers.com




Watched TopicsWatched Topics SearchSearch RegisterRegister Log in to check your private messagesLog in to check your private messages ProfileProfile Log inLog in
Any solution to repeatable hard drive file corruption on ECS

 
Post new topic   Reply to topic    Index -> Elitegroup
Author Message
John
Guest





PostPosted: Tue Apr 27, 2004 9:24 am    Post subject: Any solution to repeatable hard drive file corruption on ECS Reply with quote

Has anyone come up with a solution to the "repeatable file corruption"
problem found on some ECS K7S5A motherboards (SiS 735) besides cutting
down the machine's speed?

I found I have this same problem and solved it by dropping my
FSB/memory speed from 133/133 to 100/100, but unfortunately this is a
very poor solution because my AMD XP 2000+ (1600 MHz) system is 25%
slower (1250 MHz) which is quite noticeable on some games.

Did any companies such as SiS or ECS release any drivers, new BIOS, or
patches which will fix this problem on Windows 2000? I looked at their
sites and couldn't find a single mention of this problem nor could I
find any solutions at ocworkbench.

I only have this problem when copying large amounts of data using
Windows Explorer onto NTFS partitions. With the FSB/memory speed at
133/133 I always get at least 1 file corruption per 30 GB copied (I
determine this by using Windiff on the files after copying them).
Interestingly, the problem doesn't seem to affect memory because my
machine never crashes or hangs. I never noticed this in years past
because I only used the machine for games until recently, plus I added
a WD 160 GB HD. At first I was suspicious the BIOS couldn't handle the
full 160 GB, but after swapping the 160 with a 120 and having the same
problems I knew it wasn't hard drive specific.

Would slowing down the hard drive transfer rate have the same effect
as cutting the speed from 133/133 to 100/100? I'd much prefer to slow
down my hard drive transfers a little than my CPU, but going to PIO 4
would be a bit too far. It's a pain to have to go into the BIOS and
switch back to 133/133 whenever I want to play a game, and then go
back to 100/100 when I want to do some file editing.

Any suggestions would be appreciated (preferably ones besides buying a
new mobo). Thanks.
Back to top
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
CJT
Guest





PostPosted: Tue Apr 27, 2004 9:58 am    Post subject: Re: Any solution to repeatable hard drive file corruption on Reply with quote

John wrote:
Quote:
Has anyone come up with a solution to the "repeatable file corruption"
problem found on some ECS K7S5A motherboards (SiS 735) besides cutting
down the machine's speed?

I found I have this same problem and solved it by dropping my
FSB/memory speed from 133/133 to 100/100, but unfortunately this is a
very poor solution because my AMD XP 2000+ (1600 MHz) system is 25%
slower (1250 MHz) which is quite noticeable on some games.

Did any companies such as SiS or ECS release any drivers, new BIOS, or
patches which will fix this problem on Windows 2000? I looked at their
sites and couldn't find a single mention of this problem nor could I
find any solutions at ocworkbench.

I only have this problem when copying large amounts of data using
Windows Explorer onto NTFS partitions. With the FSB/memory speed at
133/133 I always get at least 1 file corruption per 30 GB copied (I
determine this by using Windiff on the files after copying them).
Interestingly, the problem doesn't seem to affect memory because my
machine never crashes or hangs. I never noticed this in years past
because I only used the machine for games until recently, plus I added
a WD 160 GB HD. At first I was suspicious the BIOS couldn't handle the
full 160 GB, but after swapping the 160 with a 120 and having the same
problems I knew it wasn't hard drive specific.

Would slowing down the hard drive transfer rate have the same effect
as cutting the speed from 133/133 to 100/100? I'd much prefer to slow
down my hard drive transfers a little than my CPU, but going to PIO 4
would be a bit too far. It's a pain to have to go into the BIOS and
switch back to 133/133 whenever I want to play a game, and then go
back to 100/100 when I want to do some file editing.

Any suggestions would be appreciated (preferably ones besides buying a
new mobo). Thanks.

Have you run memtest on your memory?


--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form che...@prodigy.net.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Index -> Elitegroup All times are GMT
Page 1 of 1

 

 MemberlistMemberlist  UsergroupsUsergroups



Powered by p|-|pBB

Featured Sites: DIY Projects