|
|
|
|
| Author |
Message |
Cedric B
Guest
|
 Posted: Tue May 04, 2004 3:20 pm Post subject: Update 1007 failed on P4PE - Urgent |
 |
|
During an update of my BIOS version (from 1002 to 1007), it's failed. Since,
my computer doesn't start... What can I do ??? Switch ? Setup doesn't
reachable..
Thanks for your help |
|
| Back to top |
|
 |
|
|
CaptBaldo
Guest
|
| Posted: Tue May 04, 2004 9:52 pm Post subject: Re: Update 1007 failed on P4PE - Urgent |
|
|
"Cedric B" <tnomelbk@yahoo.fr> wrote in message
news:c77qmo$psq$1@s1.read.news.oleane.net...
| Quote: | During an update of my BIOS version (from 1002 to 1007), it's failed.
Since,
my computer doesn't start... What can I do ??? Switch ? Setup doesn't
reachable..
Thanks for your help
|
I had a similar problem with my P4PE-X. Bios wouldn't update using
EZ-Update. Which method did you use to update the bios. I was only able to
succesfully update my bios from 1004 to 1007 by using a boot disk and using
aflash. According to ASUS website the P4PE and I believe all models of it
have crashfree bios. Reboot the system and insert the CD that came with
your motherboard. This will allow you to load a temp bios from the cd then
you can re-update the bios to 1007 using the boot disk method. Hope this
helps.
CaptBaldo |
|
| Back to top |
|
|
Guest
|
| Posted: Wed May 05, 2004 1:22 am Post subject: Re: Update 1007 failed on P4PE - Urgent |
|
|
On Tue, 4 May 2004 12:52:49 -0400, "CaptBaldo" <captbaldo@hotmail.com>
wrote:
I had a similar problem with a P4P800 and the cd saved my bacon. I
also have a P4pe, however without the retail CD. So just wondering if
anyone knows where to download the cd so as to feel better if I ever
do a bios upgrade and run into a nasty situation?
thanks, eric .
| Quote: | I had a similar problem with my P4PE-X. Bios wouldn't update using
EZ-Update. Which method did you use to update the bios. I was only able to
succesfully update my bios from 1004 to 1007 by using a boot disk and using
aflash. According to ASUS website the P4PE and I believe all models of it
have crashfree bios. Reboot the system and insert the CD that came with
your motherboard. This will allow you to load a temp bios from the cd then
you can re-update the bios to 1007 using the boot disk method. Hope this
helps.
CaptBaldo
|
|
|
| Back to top |
|
|
DaveW
Guest
|
| Posted: Wed May 05, 2004 3:19 am Post subject: Re: Update 1007 failed on P4PE - Urgent |
|
|
I'm afraid your motherboard is done for.
--
DaveW
"Cedric B" <tnomelbk@yahoo.fr> wrote in message
news:c77qmo$psq$1@s1.read.news.oleane.net...
| Quote: | During an update of my BIOS version (from 1002 to 1007), it's failed.
Since,
my computer doesn't start... What can I do ??? Switch ? Setup doesn't
reachable..
Thanks for your help
|
|
|
| Back to top |
|
|
Shishimai
Guest
|
| Posted: Wed May 05, 2004 3:58 am Post subject: Re: Update 1007 failed on P4PE - Urgent |
|
|
On Tue, 04 May 2004 22:22:10 +0200, in article
<umuf90d4bsemal0eu00l81tcrlj3qv1ndo@4ax.com>, eric@egypt.net wrote:
| Quote: | On Tue, 4 May 2004 12:52:49 -0400, "CaptBaldo" <captbaldo@hotmail.com
wrote:
I had a similar problem with a P4P800 and the cd saved my bacon. I
also have a P4pe, however without the retail CD. So just wondering if
anyone knows where to download the cd so as to feel better if I ever
do a bios upgrade and run into a nasty situation?
thanks, eric .
I had a similar problem with my P4PE-X. Bios wouldn't update using
EZ-Update. Which method did you use to update the bios. I was only able to
succesfully update my bios from 1004 to 1007 by using a boot disk and using
aflash. According to ASUS website the P4PE and I believe all models of it
have crashfree bios. Reboot the system and insert the CD that came with
your motherboard. This will allow you to load a temp bios from the cd then
you can re-update the bios to 1007 using the boot disk method. Hope this
helps.
CaptBaldo
|
What are the advantages, if any, of 1007 over 1005? I won't even take a slight
risk unless they are pretty obvious.
Shishimai |
|
| Back to top |
|
|
|
|
CaptBaldo
Guest
|
| Posted: Wed May 05, 2004 9:12 am Post subject: Re: Update 1007 failed on P4PE - Urgent |
|
|
Incorrect. P4PE has crashfree bios, meaning if bios update goes wrong
system will still boot allowing you to use retail cd that comes with
motherboard to re-load bios and save your skin. This is a nice feature for
these boards. If this was another board that didn't have a similar feature
than you would be scr**ed.
CaptBaldo
"DaveW" <none@zero.org> wrote in message
news:NFUlc.23432$TD4.3267132@attbi_s01...
| Quote: | I'm afraid your motherboard is done for.
--
DaveW
"Cedric B" <tnomelbk@yahoo.fr> wrote in message
news:c77qmo$psq$1@s1.read.news.oleane.net...
During an update of my BIOS version (from 1002 to 1007), it's failed.
Since,
my computer doesn't start... What can I do ??? Switch ? Setup doesn't
reachable..
Thanks for your help
|
|
|
| Back to top |
|
|
CaptBaldo
Guest
|
| Posted: Wed May 05, 2004 9:14 am Post subject: Re: Update 1007 failed on P4PE - Urgent |
|
|
You should be able to create a bootable disk with the aflash utility on it
and a bios file. Thus if you mucked up the update the crash-free would kick
in and if there wasn't a cd to use the bootable disk would do the same thing
as the retail mobo cd would do. Hope that helps.
CaptBaldo
<eric@egypt.net> wrote in message
news:umuf90d4bsemal0eu00l81tcrlj3qv1ndo@4ax.com...
| Quote: | On Tue, 4 May 2004 12:52:49 -0400, "CaptBaldo" <captbaldo@hotmail.com
wrote:
I had a similar problem with a P4P800 and the cd saved my bacon. I
also have a P4pe, however without the retail CD. So just wondering if
anyone knows where to download the cd so as to feel better if I ever
do a bios upgrade and run into a nasty situation?
thanks, eric .
I had a similar problem with my P4PE-X. Bios wouldn't update using
EZ-Update. Which method did you use to update the bios. I was only able
to
succesfully update my bios from 1004 to 1007 by using a boot disk and
using
aflash. According to ASUS website the P4PE and I believe all models of
it
have crashfree bios. Reboot the system and insert the CD that came with
your motherboard. This will allow you to load a temp bios from the cd
then
you can re-update the bios to 1007 using the boot disk method. Hope this
helps.
CaptBaldo
|
|
|
| Back to top |
|
|
Cedric B
Guest
|
| Posted: Wed May 05, 2004 11:54 pm Post subject: Re: Update 1007 failed on P4PE - Urgent |
|
|
I think my problem is greater... With the ASUS Tech advise, I do CMOS Clear
(switch 1-2 to 2-3 as Asus doc)... Since my screen doesn't light on. There
is mothing on my screen...
I didn't think I can use Retail CD ...
Thanks for all your helps, It was nice !
"CaptBaldo" <captbaldo@hotmail.com> a écrit dans le message news:
_XZlc.4952$_12.2658@read1.cgocable.net...
| Quote: | Incorrect. P4PE has crashfree bios, meaning if bios update goes wrong
system will still boot allowing you to use retail cd that comes with
motherboard to re-load bios and save your skin. This is a nice feature
for
these boards. If this was another board that didn't have a similar
feature
than you would be scr**ed.
CaptBaldo
"DaveW" <none@zero.org> wrote in message
news:NFUlc.23432$TD4.3267132@attbi_s01...
I'm afraid your motherboard is done for.
--
DaveW
"Cedric B" <tnomelbk@yahoo.fr> wrote in message
news:c77qmo$psq$1@s1.read.news.oleane.net...
During an update of my BIOS version (from 1002 to 1007), it's failed.
Since,
my computer doesn't start... What can I do ??? Switch ? Setup doesn't
reachable..
Thanks for your help
|
|
|
| Back to top |
|
|
GMAN
Guest
|
| Posted: Thu May 06, 2004 8:05 am Post subject: Re: Update 1007 failed on P4PE - Urgent |
|
|
In article <c7bd64$dp0$1@s1.read.news.oleane.net>, "Cedric B" <tnomelbk@yahoo.fr> wrote:
| Quote: | I think my problem is greater... With the ASUS Tech advise, I do CMOS Clear
(switch 1-2 to 2-3 as Asus doc)... Since my screen doesn't light on. There
is mothing on my screen...
|
You have to do it with the computer physically unplugged from the power mains.
| Quote: | I didn't think I can use Retail CD ...
Thanks for all your helps, It was nice !
"CaptBaldo" <captbaldo@hotmail.com> a écrit dans le message news:
_XZlc.4952$_12.2658@read1.cgocable.net...
Incorrect. P4PE has crashfree bios, meaning if bios update goes wrong
system will still boot allowing you to use retail cd that comes with
motherboard to re-load bios and save your skin. This is a nice feature
for
these boards. If this was another board that didn't have a similar
feature
than you would be scr**ed.
CaptBaldo
"DaveW" <none@zero.org> wrote in message
news:NFUlc.23432$TD4.3267132@attbi_s01...
I'm afraid your motherboard is done for.
--
DaveW
"Cedric B" <tnomelbk@yahoo.fr> wrote in message
news:c77qmo$psq$1@s1.read.news.oleane.net...
During an update of my BIOS version (from 1002 to 1007), it's failed.
Since,
my computer doesn't start... What can I do ??? Switch ? Setup doesn't
reachable..
Thanks for your help
|
|
|
| Back to top |
|
|
Guest
|
| Posted: Thu May 06, 2004 12:52 pm Post subject: Re: Update 1007 failed on P4PE - Urgent |
|
|
On Tue, 4 May 2004 12:20:42 +0200, "Cedric B" <tnomelbk@yahoo.fr>
wrote:
Does anyone know where to download the retail cd on the net?
thanks, eric
| Quote: | During an update of my BIOS version (from 1002 to 1007), it's failed. Since,
my computer doesn't start... What can I do ??? Switch ? Setup doesn't
reachable..
Thanks for your help
|
|
|
| Back to top |
|
|
|
|
Cedric B
Guest
|
| Posted: Thu May 06, 2004 9:24 pm Post subject: Re: Update 1007 failed on P4PE - Urgent |
|
|
Yes, I do... I think to send my motherboard to ASUS France. Thanks a lot of
!
"GMAN" <glenzabr@xmission.com> a écrit dans le message news:
c7ca3f$r2j$1@terabinaries.xmission.com...
| Quote: | In article <c7bd64$dp0$1@s1.read.news.oleane.net>, "Cedric B"
tnomelbk@yahoo.fr> wrote:
I think my problem is greater... With the ASUS Tech advise, I do CMOS
Clear
(switch 1-2 to 2-3 as Asus doc)... Since my screen doesn't light on.
There
is mothing on my screen...
You have to do it with the computer physically unplugged from the power
mains.
I didn't think I can use Retail CD ...
Thanks for all your helps, It was nice !
"CaptBaldo" <captbaldo@hotmail.com> a écrit dans le message news:
_XZlc.4952$_12.2658@read1.cgocable.net...
Incorrect. P4PE has crashfree bios, meaning if bios update goes wrong
system will still boot allowing you to use retail cd that comes with
motherboard to re-load bios and save your skin. This is a nice feature
for
these boards. If this was another board that didn't have a similar
feature
than you would be scr**ed.
CaptBaldo
"DaveW" <none@zero.org> wrote in message
news:NFUlc.23432$TD4.3267132@attbi_s01...
I'm afraid your motherboard is done for.
--
DaveW
"Cedric B" <tnomelbk@yahoo.fr> wrote in message
news:c77qmo$psq$1@s1.read.news.oleane.net...
During an update of my BIOS version (from 1002 to 1007), it's
failed.
Since,
my computer doesn't start... What can I do ??? Switch ? Setup
doesn't
reachable..
Thanks for your help
|
|
|
| Back to top |
|
|
|
|
| |
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups