|
|
|
|
| Author |
Message |
Lenny
Guest
|
 Posted: Wed Apr 21, 2004 3:06 pm Post subject: problems installing an ASPI layer to use ClonyXXL |
 |
|
Hello,
I've been using ClonyXXL for quite a while now and I've never had any
considerable problems. I do have to install an ASPI layer on some PC I use
the program on, and version 4.60 was advised as the best one. Uptil now,
this has worked for me every time.
However, my school purchased a numer of new PC's and I'm not sure if they
are the problem, but I can't get an ASPI layer installed on them. The PC's
run Windows XP. Whenever I run aspi.bat I get the error that the file cannot
find a certain amount of other files, even though they are located in the
same folder as aspi.bat itself. I therefore can't install the layer. Someone
already advised me to try ForceASPI, but that didn't work either. After
running those files according to the instructions, the mini-program says the
layer is installed, but when I run aspi check, there is no sign of the new
layer, even after a reboot.
I'm at a loss of what I have to do now. Is there some kind of conflict with
programs that I should think of? Are there other versions of ASPI out there
that would be compatitble with ClonyXXL?
Thanks in advance for any hints,
Lenny |
|
| Back to top |
|
 |
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
|
|
Graham Mayor
Guest
|
| Posted: Wed Apr 21, 2004 4:00 pm Post subject: Re: problems installing an ASPI layer to use ClonyXXL |
|
|
Put a copy of Nero's wnaspi32.dll file in the ClonyXXL folder.
If you are running Nero you'll find it in the Nero folder. If not you can
get it from the Nero web site.
This technique works with many applications that require ASPI under Windows
XP - and certainly does with ClonyXXL.
--
<>>< ><<> ><<>
Graham Mayor
<>>< ><<> ><<>
Lenny wrote:
| Quote: | Hello,
I've been using ClonyXXL for quite a while now and I've never had any
considerable problems. I do have to install an ASPI layer on some PC
I use the program on, and version 4.60 was advised as the best one.
Uptil now, this has worked for me every time.
However, my school purchased a numer of new PC's and I'm not sure if
they are the problem, but I can't get an ASPI layer installed on
them. The PC's run Windows XP. Whenever I run aspi.bat I get the
error that the file cannot find a certain amount of other files, even
though they are located in the same folder as aspi.bat itself. I
therefore can't install the layer. Someone already advised me to try
ForceASPI, but that didn't work either. After running those files
according to the instructions, the mini-program says the layer is
installed, but when I run aspi check, there is no sign of the new
layer, even after a reboot.
I'm at a loss of what I have to do now. Is there some kind of
conflict with programs that I should think of? Are there other
versions of ASPI out there that would be compatitble with ClonyXXL?
Thanks in advance for any hints,
Lenny |
|
|
| Back to top |
|
|
Lenny
Guest
|
| Posted: Wed Apr 21, 2004 5:00 pm Post subject: Re: problems installing an ASPI layer to use ClonyXXL |
|
|
Thank you for your quick response! I will try the method you gave ...
Lenny
"Graham Mayor" <gmayor@noonehome.com> schreef in bericht
news:c662rm$8e4p3$1@ID-88807.news.uni-berlin.de...
| Quote: | Put a copy of Nero's wnaspi32.dll file in the ClonyXXL folder.
If you are running Nero you'll find it in the Nero folder. If not you can
get it from the Nero web site.
This technique works with many applications that require ASPI under
Windows
XP - and certainly does with ClonyXXL.
--
Graham Mayor
Lenny wrote:
Hello,
I've been using ClonyXXL for quite a while now and I've never had any
considerable problems. I do have to install an ASPI layer on some PC
I use the program on, and version 4.60 was advised as the best one.
Uptil now, this has worked for me every time.
However, my school purchased a numer of new PC's and I'm not sure if
they are the problem, but I can't get an ASPI layer installed on
them. The PC's run Windows XP. Whenever I run aspi.bat I get the
error that the file cannot find a certain amount of other files, even
though they are located in the same folder as aspi.bat itself. I
therefore can't install the layer. Someone already advised me to try
ForceASPI, but that didn't work either. After running those files
according to the instructions, the mini-program says the layer is
installed, but when I run aspi check, there is no sign of the new
layer, even after a reboot.
I'm at a loss of what I have to do now. Is there some kind of
conflict with programs that I should think of? Are there other
versions of ASPI out there that would be compatitble with ClonyXXL?
Thanks in advance for any hints,
Lenny
|
|
|
| Back to top |
|
|
|
|
| |
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups