Posted: Fri Jun 08, 2007 5:20 am Post subject: Will this cable work with my sun servers?
Hi,
I tried wiring my own cables to connect the the RJ45 serail management
port of my sun servers but was unable to get to the lom. I'm about to
purchase a cable from cdw and I'd like to make sure that this one will
work. Here are the specs to the RJ45-DB9 Female connector:
http://www.cdw.com/shop/products/specs.aspx?EDC=675530
Will I be able to get to the lom with this cable from hyperterminal?
Sorry for the newbie questions, I probably should go back to the dell
servers because I'm more familiar with them than these sun boxes.
I tried wiring my own cables to connect the the RJ45 serail management
port of my sun servers but was unable to get to the lom. I'm about to
purchase a cable from cdw and I'd like to make sure that this one will
work. Here are the specs to the RJ45-DB9 Female connector:
http://www.cdw.com/shop/products/specs.aspx?EDC=675530
Will I be able to get to the lom with this cable from hyperterminal?
Sorry for the newbie questions, I probably should go back to the dell
servers because I'm more familiar with them than these sun boxes.
Get a cisco console cable kit from eBay. Same pinout, they work fine,
and there's probably a dozen up for auction now.
The APC part # won't be the right pinout, they are different. While
there is some standard, nobody follows it. The cisco pinout is the one
most network gear has fallen into use.
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups